4.7 Article

Trimetallic Prussian blue analogue derived FeCo/FeCoNi@NPC composites for highly efficient microwave absorption

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Dimensional Design and Core-Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption

Zhengchen Wu et al.

Summary: Electromagnetic wave absorption materials with core-shell structures can enhance performance through interfacial polarization, conduction networks, magnetic coupling, and magnetic-dielectric synergy. This review outlines the recent advances in low-dimensional core-shell electromagnetic wave absorption materials and discusses notable examples. Key information regarding dimensional design, structural engineering, performance, and structure-function relationship is comprehensively summarized.

ADVANCED MATERIALS (2022)

Article Engineering, Multidisciplinary

Flexible hierarchical ZnO/AgNWs/carbon cloth-based film for efficient microwave absorption, high thermal conductivity and strong electro-thermal effect

Xiaopeng Han et al.

Summary: Flexible ZnO/carbon cloth (CC@ZnO) films with high microwave absorption performance were prepared, and further coated with silver nanowires to form CC@ZnO/AgNWs/PVA (CAP) films with highly conductive networks. These materials exhibit excellent properties in absorption performance, conductivity, and high-temperature resistance, with potential applications in the protection of wearable electronics.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

Metal/nitrogen co-doped hollow carbon nanorods derived from self-assembly organic nanostructure for wide bandwidth electromagnetic wave absorption

Lipeng Wu et al.

Summary: In this study, a series of metal/nitrogen co-doped hollow carbon nanorods were successfully fabricated, with Co-NHCR showing remarkable electromagnetic wave absorption performance. This indicates its promising applications in lightweight and high-performance electromagnetic wave absorption.

COMPOSITES PART B-ENGINEERING (2022)

Review Chemistry, Multidisciplinary

Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials

Ming Qin et al.

Summary: Comprehensive views on dielectric loss mechanisms provide important guidance for understanding the attenuation behavior of materials. Current researches focus more on materials synthesis rather than in-depth mechanism study. Therefore, further research on in-depth mechanisms, emphasis on new dielectric loss mechanisms, and new modulation strategies are needed to achieve simple and effective EM wave attenuation behavior modulation.

ADVANCED SCIENCE (2022)

Article Multidisciplinary Sciences

Microstructure induced dielectric loss in lightweight Fe3O4 foam for electromagnetic wave absorption

Qing Chang et al.

Summary: This study proposes a design approach of constructing a 3D structure to improve the electromagnetic wave absorption performance of Fe3O4. By adjusting the microstructure of the material, optimal impedance matching is achieved, and the issue of material aggregation is overcome. The results of this study demonstrate the promising performance of the samples in terms of density and absorption bandwidth.

ISCIENCE (2022)

Article Chemistry, Physical

Facile synthesis of MnS nanoparticle embedded porous carbon nanocomposite fibers for broadband electromagnetic wave absorption

Jing Qiao et al.

Summary: In this study, manganese sulfide/carbon nanocomposite fibers with wide absorption bandwidth and strong electromagnetic wave absorption intensity were synthesized using a simple electrospinning and high-temperature processing method. The research found that manganese sulfide can enhance the attenuation ability of the material and optimize impedance matching characteristics.

CARBON (2022)

Article Chemistry, Physical

Bimetallic nanoarrays embedded in three-dimensional carbon foam as lightweight and efficient microwave absorbers

Bo Wei et al.

Summary: This study proposes a new strategy to achieve lightweight and high-efficiency microwave absorption by constructing hierarchical special structures. The bimetallic nanoarray composed of nickel/cobalt embedded three-dimensional carbon foam (BNA/3dCF) is synthesized using a hydrothermal process and high-temperature annealing. The BNA/3dCF exhibits excellent absorption performance and impedance matching capability.

CARBON (2022)

Article Engineering, Manufacturing

Facile preparation of C/MnO/Co nanocomposite fibers for High-Performance microwave absorption

Sinan Zheng et al.

Summary: In this study, C/MnO/Co nanocomposite fibers were prepared using a simple electrospinning and carbonization process. The nanocomposites exhibited excellent microwave absorption performance and a rough surface morphology.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Article Engineering, Multidisciplinary

Facile manufacturing of Ni/MnO nanoparticle embedded carbon nanocomposite fibers for electromagnetic wave absorption

Yue Liu et al.

Summary: In this study, a nickel/manganese oxide/carbon nanocomposite fiber material was prepared using a simple and scalable method, and it exhibited excellent electromagnetic wave absorption performance. The unique microstructure and multi-component building units of the nanocomposite materials allowed for a wide effective absorption bandwidth and minimum reflection loss at specific thicknesses.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

Electromagnetic wave absorption superalloy/graphite magnetic nanocapsules applied in wide temperature range

Z. X. Lei et al.

Summary: Novel nano composite superalloy/graphite FeNi3@C nanocapsules were synthesized, showing stable magnetic behavior and strong anti-oxidation ability, and exhibiting efficient electromagnetic wave absorption.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

Ternary assembled MOF-derived composite: Anisotropic epitaxial growth and microwave absorption

Fei Wu et al.

Summary: In recent years, metal-organic framework (MOF)-derived absorbers have gained significant attention in the field of microwave absorption. This study successfully constructs binary and ternary assemblies using unique anisotropic epitaxial growth strategies. The resulting absorbers are converted into magnetic porous carbon-based materials with excellent electromagnetic loss capabilities. The optimized absorber achieves improved microwave absorbing properties compared to the initial assembly.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

Multifunctional sandwich-structured magnetic-electric composite films with Joule heating capacities toward absorption-dominant electromagnetic interference shielding

Zhengzheng Guo et al.

Summary: In this study, a sandwich-structured EMI shielding composite film with Joule heating performance was fabricated using a feasible vacuum-assisted filtration method. The rational arrangement of impedance matching layer and shielding layer resulted in excellent EMI shielding effectiveness, flexibility, and mechanical property.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

The flexible carbon fibers@ZIF-67 decorated with MoS2 layers towards tunable and high-performance electromagnetic wave absorption

Xiaopeng Han et al.

Summary: In this study, a novel hierarchical carbon fibers@ZIF-67@MoS2 film with tunable and efficient electromagnetic wave absorption performance was successfully fabricated. The synergistic effects of ZIF-67 and MoS2 resulted in high reflection loss and wide effective absorption bandwidth of the fabricated absorber.

COMPOSITES PART B-ENGINEERING (2022)

Review Materials Science, Multidisciplinary

Metal sulfides based composites as promising efficient microwave absorption materials: A review

Bin Li et al.

Summary: The increasingly severe electromagnetic microwave pollution poses higher requirements for efficient microwave absorption (MA) materials. Metal sulfides are considered potential robust MA materials due to their unique properties and controllable microstructures. However, the MA performances of unary metal sulfides are limited, and morphology regulations and foreign materials hybridizations are adopted to improve their performances. This review systematically summarizes the research progress, synthetic methods, and performance improvement strategies of metal sulfides based MA materials, analyzes the influence of dimensionality and morphology on MA properties, reveals the influence of foreign materials hybridizations on the loss mechanisms and impedance matching conditions, and presents the challenges and development prospects of metal sulfides based MA materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Review Materials Science, Multidisciplinary

Electromagnetic absorption materials: Current progress and new frontiers

Hualiang Lv et al.

Summary: This article provides a comprehensive review of the current status and new frontiers in electromagnetic absorption materials. It covers the fundamentals, chemical strategies, and new advances in traditional and next-generation materials. The article concludes with an outlook on future research and challenges in this field.

PROGRESS IN MATERIALS SCIENCE (2022)

Article Nanoscience & Nanotechnology

Ultrahigh Density of Atomic CoFe-Electron Synergy in Noncontinuous Carbon Matrix for Highly Efficient Magnetic Wave Adsorption

Wenhuan Huang et al.

Summary: In this study, a high-temperature explosion strategy was used to successfully assemble hierarchical porous carbon sponge with Co-Fe decoration. The as-constructed hybrid material exhibited superior electromagnetic wave absorption performance. Off-axis electron holography and X-ray absorption spectroscopy analysis revealed the presence of polarized nanodomain and the mutual interaction between metal clusters and carbon matrix responsible for the improved absorption.

NANO-MICRO LETTERS (2022)

Review Nanoscience & Nanotechnology

State of the Art and Prospects in Metal-Organic Framework-Derived Microwave Absorption Materials

Shuning Ren et al.

Summary: This review comprehensively discusses the recent research progress on metal-organic framework (MOF)-derived high-performance microwave absorption materials (MAMs), including the categorization, design principles, preparation methods, and the relationship between microwave absorption mechanisms and microstructures of MAMs. The current challenges and future prospects for MOF-derived MAMs are also discussed.

NANO-MICRO LETTERS (2022)

Article Chemistry, Physical

Phenolic resin reinforcement: A new strategy for hollow NiCo@C microboxes against electromagnetic pollution

Liru Cui et al.

Summary: The study successfully synthesized hollow NiCo@C microboxes through alkaline etching and phenolic resin (PR) reinforcement using NiCo Prussian blue analog (PBA) microcubes as the precursor. The PR modification stabilized the microstructure during high-temperature pyrolysis and regulated the chemical composition simultaneously, promising the microboxes a bright prospect as potential candidates against electromagnetic pollution.

CARBON (2021)

Article Chemistry, Physical

A hierarchical carbon Fiber@MXene@ZnO core-sheath synergistic microstructure for efficient microwave absorption and photothermal conversion

Xiaopeng Han et al.

Summary: The continuous 3D hierarchical construction method has been proven to be an effective way to prepare high-efficiency microwave absorption composites. A novel hierarchical carbon fiber @MXene@ZnO core-sheath structure with tunable and efficient microwave absorption performance has been successfully synthesized through a self-assembly and hydrothermal process. The composite material exhibits excellent microwave absorption and photothermal properties, providing a new strategy for designing safe and wearable devices.

CARBON (2021)

Article Engineering, Multidisciplinary

1D magnetic nitrogen doped carbon-based fibers derived from NiFe Prussian blue analogues embedded polyacrylonitrile via electrospinning with tunable microwave absorption

Fu Chen et al.

Summary: The study successfully prepared NiFe-PBA and NiFe@NCFs, demonstrating excellent microwave absorption capabilities at 11.5 GHz with minimal reflection loss and a broad effective absorption bandwidth. This was attributed to suitable impedance matching and strong intrinsic attenuation capabilities.

COMPOSITES PART B-ENGINEERING (2021)

Article Chemistry, Physical

Magnetic porous N-doped carbon composites with adjusted composition and porous microstructure for lightweight microwave absorbers

Panbo Liu et al.

Summary: This study reported the fabrication of metal porous N-doped carbon absorbers using a coordination assembly strategy, which demonstrated excellent absorption performance through structure design and composition control.

CARBON (2021)

Article Multidisciplinary Sciences

A flexible electromagnetic wave-electricity harvester

Hualiang Lv et al.

Summary: The study introduces a hybrid Sn@C composite with a biological cell-like splitting ability that enhances the efficiency of converting electromagnetic waves into electricity and heat. This material provides a promising solution for addressing electromagnetic interference with self-powered devices.

NATURE COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Non-Magnetic Bimetallic MOF-Derived Porous Carbon-Wrapped TiO2/ZrTiO4 Composites for Efficient Electromagnetic Wave Absorption

Jing Qiao et al.

Summary: The use of non-magnetic bimetallic MOF derivatives has shown great potential in achieving efficient electromagnetic wave absorption, with enhanced interfacial polarization and other attenuation mechanisms contributing to this result.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

Revealing the Thermal Safety of Prussian Blue Cathode for Safer Nonaqueous Batteries

Zheng Li et al.

Summary: This study investigates the thermal runaway mechanisms of Prussian blue analogs in nonaqueous sodium- and potassium-ion batteries, revealing a new runaway mechanism that does not involve oxygen evolution, and identifying safety issues related to cyanide release and exothermic reactions with the electrolyte. Calorimetric studies at the full-cell level show mitigated heat generation but lower initiation temperature of runaway compared to conventional systems, suggesting that PBA materials cannot be considered as safe cathodes and highlighting the importance of crystal defects and trapped water content in thermal safety.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Multifunctional Magnetic Ti3C2Tx MXene/Graphene Aerogel with Superior Electromagnetic Wave Absorption Performance

Luyang Liang et al.

Summary: The study successfully developed a three-dimensional dielectric/magnetic aerogel with superior absorption performance, broad absorption bandwidth, and excellent electromagnetic wave absorbing capabilities, demonstrating potential for stable and durable electromagnetic applications.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Hollow Engineering to Co@N-Doped Carbon Nanocages via Synergistic Protecting-Etching Strategy for Ultrahigh Microwave Absorption

Panbo Liu et al.

Summary: A controlled synergistic protecting-etching strategy was proposed to construct hollow Co@N-doped carbon nanocages with uniform heterojunctions, addressing the shortcomings of using sacrificing templates or corrosive agents and exhibiting superior microwave absorption performance. The strategy not only provides inspiration for creating hollow void inside other MOFs crystals, but also broadens the candidates for lightweight and high-efficient microwave absorbers.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

A theoretical strategy of pure carbon materials for lightweight and excellent absorption performance

Xu Yan et al.

Summary: Developing pure carbon materials for electromagnetic wave absorption is highly valuable, and maintaining high conductivity while adjusting the relaxation intensity is an effective way to improve absorption. Experimental results demonstrate that carbon absorbers with high conductivity and appropriate relaxation intensity show excellent absorption performance and wide absorption bandwidth.

CARBON (2021)

Article Engineering, Multidisciplinary

Unique nanoporous structure derived from Co3O4-C and Co/CoO-C composites towards the ultra-strong electromagnetic absorption

Yang Li et al.

Summary: Novel dual-configuration nanoporous Co3O4-C and Co/CoO-C composites were developed, demonstrating exceptional microwave absorption performance attributed to multiple factors such as multiple reflection and scattering, interface polarization effect, and good impedance matching, showing promising potential for lightweight and high-efficient microwave absorbers.

COMPOSITES PART B-ENGINEERING (2021)

Article Chemistry, Multidisciplinary

In Situ Anchoring Polymetallic Phosphide Nanoparticles within Porous Prussian Blue Analogue Nanocages for Boosting Oxygen Evolution Catalysis

Guangxun Zhang et al.

Summary: By designing NiCoFe-P-NP@ NiCoFe-PBA nanocages with porous surfaces and synergistic effects between pMP-NPs and PBA cyano groups, significantly enhanced catalytic activity for OER was achieved. This study not only offers a strategy for in situ anchoring pMP-NPs on PBA nanocages but also provides a new insight into optimizing Gibbs free energy of OER by regulating electron transfer from metallic phosphides to PBA substrate.

NANO LETTERS (2021)

Article Chemistry, Physical

Prussian blue analogue derived carbon-based composites toward lightweight microwave absorption

Xiaohui Liang et al.

Summary: Different carbon-based composites derived from metal organic frameworks (MOFs) have shown significant tuning effects on microwave absorption through various annealing atmospheres, demonstrating excellent performance under different thicknesses. These composites have promising applications due to their strong microwave attenuation capability and broad effective absorption bandwidth.

CARBON (2021)

Article Engineering, Multidisciplinary

CoNi alloy with tunable magnetism encapsulated by N-doped carbon nanosheets toward high-performance microwave attenuation

Shan Gao et al.

Summary: The CoNi alloy embedded in NC nanosheets with tunable magnetism showed extraordinary wave attenuation capacity and effective absorption bandwidth, offering a promising direction for synthesizing dielectric-magnetic composites with excellent microwave absorption properties.

COMPOSITES PART B-ENGINEERING (2021)

Review Nanoscience & Nanotechnology

Carbon-Based MOF Derivatives: Emerging Efficient Electromagnetic Wave Absorption Agents

Xue Zhang et al.

Summary: Metal-organic framework (MOF) derivatives show great potential in the field of electromagnetic wave (EMW) absorption due to their unique properties, satisfying diverse application requirements. Despite facing challenges, MOF derivatives exhibit outstanding performance in light weight, broad bandwidth, and robust loss capacity, offering possibilities for further research and development.

NANO-MICRO LETTERS (2021)

Review Nanoscience & Nanotechnology

Composition Optimization and Microstructure Design in MOFs-Derived Magnetic Carbon-Based Microwave Absorbers: A Review

Honghong Zhao et al.

Summary: Magnetic carbon-based composites are ideal for electromagnetic absorption, but their properties are highly dependent on precursors. Therefore, it is necessary to develop methods to effectively regulate the electromagnetic properties of these composites.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

Rationally designed hierarchical N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres for efficient microwave absorption

Dawei Liu et al.

Summary: Hierarchical microstructures, specifically the double-hierarchical N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres, have been successfully designed and fabricated with optimal absorption characteristics in high-performance microwave absorbing materials. The unique architecture of NC@NCNTs provides stronger dipole orientation, interfacial polarization relaxation, conductive loss, and multiple reflection effects for incident electromagnetic waves, demonstrating superior performance compared to previous Ni/C composites.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Triple functionalization of carved N-doped carbon nanoboxes with synergistic trimetallic sulphide for high performance lithium-sulphur batteries†

Yen-Ju Wu et al.

Summary: The triple-functionalized carved N-doped carbon nanoboxes (S-FeCoNi@C-CNB) as a high-performance sulfur host for LSBs successfully resolved the critical issues of LSBs by enhancing chemical interactions with LiPS, providing half-metallic conductivities, and catalyzing redox reactions of LiPS. Additionally, the structure served as a nanoreactor retaining LiPS at cathodes and offering a confined space for fast local redox reactions. The high-performance LSB demonstrated excellent stability with a low capacity decay rate and maintained decent capacity during cycling, indicating the success of S-FeCoNi@C-CNB in suppressing the shuttle effect.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Nanoscience & Nanotechnology

Ti3C2Tx MXene Nanosheet/Metal-Organic Framework Composites for Microwave Absorption

Xiaopeng Han et al.

Summary: Combining MXene with metal-organic frameworks resulted in high-performance absorbers with excellent absorption properties and broad absorption bandwidth, showcasing promising potential for tunable electromagnetic properties.

ACS APPLIED NANO MATERIALS (2021)

Article Chemistry, Physical

Synthesis of core-shell Co@S-doped carbon@ mesoporous N-doped carbon nanosheets with a hierarchically porous structure for strong electromagnetic wave absorption

Bo Wen et al.

Summary: The Co-MOF@MPDA composites with a core-shell structure were prepared, showing strong absorption for electromagnetic waves with a minimum reflection loss of -72.3 dB and a broad effective absorption bandwidth of 6.0 GHz. The enhancement of dipole polarization loss and conduction loss was attributed to the S, N-doped hierarchically porous carbon.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Engineering, Environmental

Hollow Ni/C microspheres derived from Ni-metal organic framework for electromagnetic wave absorption

Yun Qiu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

MoS2 spheres decorated on hollow porous ZnO microspheres with strong wideband microwave absorption

Juhua Luo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Heterostructured CoFe@C@MnO2 nanocubes for efficient microwave absorption

Yu Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Controlled reduction synthesis of yolk-shell magnetic@void@C for electromagnetic wave absorption

Shengtao Gao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Ternary Mo2C/Co/C composites with enhanced electromagnetic waves absorption

Yahui Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Synthesis of pomegranate-like Mo2C@C nanospheres for highly efficient microwave absorption

Yahui Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Materials Science, Multidisciplinary

Waxberry-like hierarchical Ni@C microspheres with high-performance microwave absorption

Dawei Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Physical

Metal organic framework-derived Fe/C nanocubes toward efficient microwave absorption

Rong Qiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)