☆ 4.7 Article

Aramid nanofiber-induced assembly of graphene nanosheets toward highly thermostable and freestanding films for electromagnetic interference shielding

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

High-Density Anisotropy Magnetism Enhanced Microwave Absorption Performance in Ti3C2Tx MXene@Ni Microspheres

Caiyue Wen et al.

Summary: This study successfully assembled double-shell MXene@Ni microspheres using a spheroidization strategy to improve microwave absorption performance. The structure offers massive accessible active surfaces and the introduction of Ni nanospikes provides additional magnetic loss capacity.

ACS NANO (2022)

Add to Collection

Article Engineering, Chemical

Elastomeric Foldable and High-Temperature Endurance Porous Graphene Films with Superior Electromagnetic Interference Shielding Performance

Dengguo Lai et al.

Summary: Materials with ultrathin, flexible, foldable properties and excellent electromagnetic interference shielding performance are in high demand. In this study, highly flexible and porous graphene films (GFs) were successfully fabricated using chemical reduction and a confined foaming approach. The annealed GFs (AGFs) demonstrated improved surface smoothness, reduced sheet resistance, enhanced high-temperature endurance, tailored porous structure, and elimination of impurities. The AGFs exhibited superior elastic recovery, reliability during bending cycles, and remarkable flexibility and mechanical strength. The AGFs also showed significantly higher shield effectiveness compared to GFs fabricated through individual reduction methods, owing to their well-constructed conductive and hierarchical porous structure. These thin AGFs with excellent flexibility, elasticity, high-temperature durability, and superb shielding performance have great potential for portable and wearable devices.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Janus (BNNS/ANF)-(AgNWs/ANF) thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Yixin Han et al.

Summary: In this study, Janus (BNNS/ANF)-(AgNWs/ANF) composite films were successfully prepared, which exhibited one side insulating, one side conducting performance. The composite films showed high thermal conductivity, superior electromagnetic interference shielding effectiveness, good mechanical properties, stable temperature-voltage response characteristics, and reliable electrical stability.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Millefeuille-Inspired Thermal Interface Materials based on Double Self-Assembly Technique for Efficient Microelectronic Cooling and Electromagnetic Interference Shielding

Yueyang Gao et al.

Summary: Due to the increasing power density of miniaturized and high-frequency electronic devices, flexible thermal interface materials (TIMs) with EMI shielding property are urgently needed. Carbon-based TIMs with ultrahigh thermal conductivity have garnered attention, but face production restrictions due to technical difficulties. A unique double self-assembly strategy inspired by millefeuille cakes has been demonstrated for fabricating TIMs with superior EMI shielding performance, achieving a balance between thermal conduction and EMI shielding effectiveness.

SMALL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

Ping Song et al.

Summary: With the rapid development of fifth-generation mobile communication technology and wearable electronic devices, the need for highly efficient EMI shielding materials has become crucial. In this study, a three-dimensional graphene oxide (GO) with regular honeycomb structure (GH) was constructed using sacrificial template and freeze-drying methods. Amino functionalized FeNi alloy particles (f-FeNi) were loaded onto the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel. The resulting rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt% exhibited a high EMI shielding effectiveness (EMI SE) of 46 dB, which is 5.8 times higher than that of rGO/FeNi/epoxy composites with the same mass fraction. The composites also displayed excellent thermal stability and mechanical properties.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Engineering, Multidisciplinary

CNT-assisted design of stable liquid metal droplets for flexible multifunctional composites

Shuang-Qin Yi et al.

Summary: This study demonstrates the design of highly stable liquid metal droplets assisted by carbon nanotubes, which can easily disperse on various polymer substrates and exhibit excellent electrical conductivity and electromagnetic interference shielding effectiveness. The resulting composite films also show outstanding Joule heating performance and thermal conductivity.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ growth of porous Cu 3 (BTC) 2 on cellulose nanofibrils for ultra-low dielectric films with high flexibility

Rui Liu et al.

Summary: Flexible polymeric films with internal porous structures have garnered increasing attention for low dielectric applications. By introducing highly porous metal-organic frameworks into an aramid nanofibers matrix with the aid of carboxylated cellulose nanofibrils, strong, flexible, and ultra-low dielectric films were obtained. The films exhibited excellent thermal stability, mechanical integrity, and UV resistance, making them suitable for microelectronic applications under large deformation conditions.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Recent Advances in Design Strategies and Multifunctionality of Flexible Electromagnetic Interference Shielding Materials

Junye Cheng et al.

Summary: With the rapid development of 5G communication technologies, there is an urgent demand for electromagnetic interference (EMI) shielding for electronic devices. This review introduces the recent development of flexible EMI shielding materials, elaborates on the EMI shielding mechanisms and the index for green EMI shielding performance, summarizes the construction strategies for multifunctional flexible shielding materials, and proposes possible research directions for the future development of flexible EMI shielding materials.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Super-Tough and Environmentally Stable Aramid Nanofiber@MXene Coaxial Fibers with Outstanding Electromagnetic Interference Shielding Efficiency

Liu-Xin Liu et al.

Summary: In this study, highly conductive, super-tough, ultra-strong, and environmentally stable Ti3C2Tx MXene-based core-shell fibers were successfully fabricated using a core-shell wet-spinning method, showing great potential for various applications.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Electrochemically Exfoliated Graphite Nanosheet Films for Electromagnetic Interference Shields

Ali Shayesteh Zeraati et al.

Summary: Electrochemical exfoliation of graphite is a highly efficient method to produce high-quality graphene materials. This study investigated the effectiveness of different exfoliation methods for graphite in developing graphene-based electromagnetic interference (EMI) shields with high electrical conductivity. The results showed that the use of certain electrolytes could lead to the production of thermally stable EEG films with excellent EMI performance, demonstrating the feasibility of using electrochemical exfoliation for high-performance EMI shields without the need for harsh chemicals or high temperatures.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible Conductive Polyimide Fiber/MXene Composite Film for Electromagnetic Interference Shielding and Joule Heating with Excellent Harsh Environment Tolerance

Kang Sun et al.

Summary: This study successfully prepared a flexible conductive PIF/MXene composite film with high conductivity and excellent tolerance to harsh environments, showing promising potential for applications in electromagnetic wave protection and personal thermal management.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Modulating electromagnetic interference shielding performance of ultra-lightweight composite foams through shape memory function

Shu Zhu et al.

Summary: This study demonstrates the fabrication of smart ultra-lightweight polyurethane foam materials with shape memory and adjustable EMI shielding functions using an environmentally-friendly strategy. The foams show exceptional EMI shielding effectiveness, high durability, and a wide range of adjustable EMI shielding efficiency through controlling their macroscopic shape. These smart foams represent a promising material candidate for wide applications of EMI shielding.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Free-standing laser-induced graphene films for high-performance electromagnetic interference shielding

Wenjie Yu et al.

Summary: In this study, polybenzoxazine was used as a precursor to fabricate LIG via a defocused lasing process, showing excellent EMI shielding effectiveness. The rapid quench-peeling method for obtaining free-standing LIG films has enabled wider adaptability and possibilities for practical applications.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Aramid nanofiber assisted preparation of self-standing liquid metal-based films for ultrahigh electromagnetic interference shielding

Fu-Wen Huang et al.

Summary: This research successfully designed a self-standing LM/ANF film with remarkable electrical conductivity, achieving a high EMI shielding effectiveness at a mere thickness. Additionally, the LM/ANF film demonstrated excellent reliability and superior thermostability even after folding cycles and thermal treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Manufacturing

Carbonized cotton textile with hierarchical structure for superhydrophobicity and efficient electromagnetic interference shielding

Li-Chuan Jia et al.

Summary: A superhydrophobic EMI shielding textile was developed through carbonizing cotton textile and regulating the surface with nano-sized carbon black and low-surface energy polydimethylsiloxane. The composite textile exhibited superior EMI shielding effectiveness, large water contact angle, low sliding angle, and resistance to physical deformations and chemical environments, which were attributed to the joint action of highly conductive carbonized textile, CB coating with nanoscale roughness, and PDMS protective layer.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Manufacturing

Flexible multilayered aramid nanofiber/silver nanowire films with outstanding thermal durability for electromagnetic interference shielding

Shuang Li et al.

Summary: The multilayered aramid nanofiber/silver nanowire films prepared by combining silver nanowires with aramid nanofibers exhibit excellent EMI shielding and mechanical properties, attributed to hydrogen bonding between layers and internal reflection of electromagnetic waves within the silver nanowire layers. These multilayered films demonstrate outstanding stability and performance advantages at high temperatures.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Reduction of Electrochemically Exfoliated Graphene Films for High-Performance Electromagnetic Interference Shielding

Seyyed Alireza Mirkhani et al.

Summary: This study demonstrates that electrochemically exfoliated graphene (EEG) with post-reduction treatment is a promising candidate for lightweight EMI shielding materials. Reduction of EEG by three different methods leads to graphene films with excellent EMI shielding effectiveness. Microwaves reduced graphene films show one of the largest reported EMI shielding values for graphene at comparable thicknesses due to improved electrical conductivity and large volume expansion.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Recycling of High-Value-Added Aramid Nanofibers from Waste Aramid Resources via a Feasible and Cost-Effective Approach

Bin Yang et al.

Summary: Recycling high-performance aramid fibers into aramid nanofibers (ANFs) is a feasible and cost-effective approach to reclaim waste aramid resources, reducing environmental pollution and preparation costs. The reclaimed ANFs show impressive performance, making them promising candidates for advanced materials. Compared to traditional recycling methods, ANFs obtained from waste aramid fibers demonstrate significant advantages in various aspects, highlighting their potential in practical applications.

ACS NANO (2021)

Add to Collection

Review Engineering, Manufacturing

Electrospun fibrous materials and their applications for electromagnetic interference shielding: A review

Hongtao Guo et al.

Summary: Electrospinning technology plays a crucial role in electromagnetic interference shielding, with electrospun products made from various fibrous materials effectively shielding electromagnetic interference and holding promise for further breakthroughs in high-performance electromagnetic shielding.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Lightweight, Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

Ping Song et al.

Summary: By dissolving cotton in a NaOH/urea solution, cellulose aerogels were obtained and further processed to prepare cellulose carbon aerogels@reduced graphene oxide aerogels. The resulting composites showed excellent EMI shielding effectiveness, thermal stability, and thermal conductivity, making them promising for lightweight and flexible EMI shielding applications.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Recent advances in graphene-based films for electromagnetic interference shielding: Review and future prospects

Yao Chen et al.

Summary: With the development of electronic information technology, electromagnetic shielding materials have become important in solving problems caused by electromagnetic waves, with graphene attracting significant attention for its outstanding properties.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Tuning of anisotropic electrical conductivity and enhancement of EMI shielding of polymer composite foam via CO2-assisted delamination and orientation of MXene

Ruosong Li et al.

Summary: Integration of foam structure into shielding material reduces mass density and enhances EMI shielding performance. The prepared composite films and foams exhibit anisotropy with high in-plane electrical conductivity and low through-plane electrical conductivity, resulting in improved EMI shielding effectiveness and absorption-dominated mechanism. Additionally, the foam structure contributes to outstanding thermal conductivity and mechanical strength.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Flexible electrospun carbon nanofibers/silicone composite films for electromagnetic interference shielding, electrothermal and photothermal applications

Zhenwei Li et al.

Summary: A flexible and multi-responsive composite film for EMI shielding with outstanding performance is proposed, showing superior EMI shielding effectiveness and ultrafast electrothermal response while maintaining gratifying photothermal properties in cold conditions. The film also exhibits excellent flexibility, with no deterioration in performance even after 1000 continuous bending cycles. These superior properties are attributed to high electrical conductivity, large specific surface area of carbon nanofibers, strong interface bonding strength, and the alternating multilayer structure. AMS films have tremendous potential as advanced EMI protection materials in large-scale applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Manufacturing

MXene/polyurethane auxetic composite foam for electromagnetic interference shielding and impact attenuation

Eunyoung Kim et al.

Summary: A MXene/auxetic polyurethane (MX/APU) composite foam has been developed for lightweight electromagnetic interference (EMI) shielding and impact attenuation, demonstrating superior EMI shielding effectiveness and multifunctionalities in lightweight applications.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Construction of three-dimensional interconnected graphene nanosheet network in thermoplastic polyurethane with highly efficient electromagnetic interference shielding

Baiqiao Fu et al.

Summary: This study successfully prepared TPU-GNSs@MF composites with high electrical conductivity and exceptional EMI shielding effectiveness, which remain reliable even after experiencing vigorous physical, chemical damages and long-term compression cycles.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Highly thermally conductive liquid metal-based composites with superior thermostability for thermal management

Li-Chuan Jia et al.

Summary: A highly thermally conductive film with excellent mechanical strength and toughness is developed using soft liquid metal (LM) and rigid aramid nanofibers (ANFs), achieving superior thermal conductivity and mechanical performance.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strong and tough graphene papers constructed with pyrene-containing small molecules via π-π/H-bonding synergistic interactions

Hong Yuan et al.

Summary: The study demonstrates a paper made of reduced graphene oxide with electrically conductive and mechanically robust properties, suitable for impact protection. The reinforcement is determined by synergistic π-π interaction and hydrogen bonding linkage, with defective pores within the graphene platelets playing a crucial role in enhancing interfacial binding.

SCIENCE CHINA-MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Thermal Conductivities, Excellent Mechanical Robustness and Flexibility, and Outstanding Thermal Stabilities of Aramid Nanofiber Composite Papers with Nacre-Mimetic Layered Structures

Tengbo Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Aramid Nanofiber/Carbon Nanotube Hybrid Aerogel Films

Peiying Hu et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Superhigh Electromagnetic Interference Shielding of Ultrathin Aligned Pristine Graphene Nanosheets Film

Qinwei Wei et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Engineering, Manufacturing

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Xutong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Metal-Level Robust, Folding Endurance, and Highly Temperature-Stable MXene-Based Film with Engineered Aramid Nanofiber for Extreme-Condition Electromagnetic Interference Shielding Applications

Chuxin Lei et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Applied

Well-aligned MXene/chitosan films with humidity response for high-performance electromagnetic interference shielding

Fang Liu et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Galvanic Replacement Reaction Involving Core-Shell Magnetic Chains and Orientation-Tunable Microwave Absorption Properties

Biao Zhao et al.

SMALL (2020)

Add to Collection

Article Engineering, Manufacturing

Flexible and alternant-layered cellulose nanofiber/graphene film with superior thermal conductivity and efficient electromagnetic interference shielding

Liang Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Highly conductive porous graphene film with excellent folding resilience for exceptional electromagnetic interference shielding

Dengguo Lai et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Stretchable and durable conductive fabric for ultrahigh performance electromagnetic interference shielding

Li-Chuan Jia et al.

CARBON (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Timesaving, High-Efficiency Approaches To Fabricate Aramid Nanofibers

Bin Yang et al.

ACS NANO (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrastrong Graphene Films via Long-Chain π-Bridging

Sijie Wan et al.

MATTER (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Efficient and Reliable Transparent Electromagnetic Interference Shielding, Film

Li-Chuan Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Binary Strengthening and Toughening of MXene/Cellulose Nanofiber Composite Paper with Nacre-Inspired Structure and Superior Electromagnetic Interference Shielding Properties

Wen-Tao Cao et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Strong, Conductive, Foldable Graphene Sheets by Sequential Ionic and pi Bridging

Sijie Wan et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Flexible, mechanically resilient carbon nanotube composite films for high-efficiency electromagnetic interference shielding

Shaowei Lu et al.

CARBON (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Integrated strength and toughness in graphene/calcium alginate films for highly efficient electromagnetic interference shielding

Li-Chuan Jia et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Completely Green Approach for the Preparation of Strong and Highly Conductive Graphene Composite Film by Using Nanocellulose as Dispersing Agent and Mechanical Compression

Weixing Yang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Tunable electromagnetic interference shielding effectiveness via multilayer assembly of regenerated cellulose as a supporting substrate and carbon nanotubes/polymer as a functional layer

Liang-Qing Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrathin flexible reduced graphene oxide/cellulose nanofiber composite films with strongly anisotropic thermal conductivity and efficient electromagnetic interference shielding

Weixing Yang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A strong and tough polymer-carbon nanotube film for flexible and efficient electromagnetic interference shielding

Li-Chuan Jia et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible, Ultrathin, and High-Efficiency Electromagnetic Shielding Properties of Poly(Vinylidene Fluoride)/Carbon Composite Films

Biao Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption

Qinghe Liu et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Yolk-Shell Ni@SnO2 Composites with a Designable Interspace To Improve the Electromagnetic Wave Absorption Properties

Biao Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Multidisciplinary Sciences

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Faisal Shahzad et al.

SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Durable and flexible graphene composites based on artists' paint for conductive paper applications

Joseph E. Mates et al.

CARBON (2015)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of graphene paper for electromagnetic interference shielding

Lu Zhang et al.

CARBON (2015)

Add to Collection

Article Chemistry, Physical

Large-area reduced graphene oxide thin film with excellent thermal conductivity and electromagnetic interference shielding effectiveness

Pradip Kumar et al.

CARBON (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin Flexible Graphene Film: An Excellent Thermal Conducting Material with Efficient EMI Shielding

Bin Shen et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Electromagnetic interference shielding effectiveness of monolayer graphene

Seul Ki Hong et al.

NANOTECHNOLOGY (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.