4.7 Article

Experimental and kinetic modeling study of the laminar burning velocity of NH3/DME/air premixed flames

Journal

COMBUSTION AND FLAME
Volume 245, Issue -, Pages -

Publisher

ELSEVIER SCIENCE INC
DOI: 10.1016/j.combustflame.2022.112372

Keywords

Ammonia; Dimethyl ether; Laminar burning velocity; Kinetic modeling; Elevated pressure

Funding

  1. National Natural Science Foundation of China [51976210, 52020105008]
  2. DNL Cooperation Fund, CAS [DNL202006]
  3. Fundamental Research Funds for the Central Universities [WK2320000055]

Ask authors/readers for more resources

This study presents an experimental and kinetic modeling investigation of the laminar burning velocity and chemical kinetics of NH3/DME/air mixtures. The results show that increasing the DME fraction enhances the burning velocity, while the initial pressure has a negative influence. The developed reaction mechanism performs well in predicting the combustion performance of different mixtures.
Ammonia (NH 3 ) as a carbon-free fuel and a high-density hydrogen carrier has received significant attention. Co-firing NH 3 with dimethyl ether (DME) is a promising option for overcoming the low reactivity of NH 3 . This paper presents an experimental and kinetic modeling study of the laminar burning velocity of NH 3 /DME/air mixtures. Experiments were conducted for the full range of DME fraction at 0.1 MPa, 298 K, and equivalence ratios ( phi) from 0.7 to 1.5 using a spherical constant-volume combustion chamber. The influence of pressure was examined for 20% - 80%DME at 298 K and phi = 0.7 - 1.4 by considering different initial pressures (0.1, 0.3, and 0.5 MPa). A small size reaction mechanism for NH 3 /DME/air mixtures was developed and validated against experiments. This mechanism performs well in predicting the laminar burning velocity of NH 3 /air, DME/air, and NH 3 /DME/air flames as well as the ignition delay time of NH 3 , DME, and NH 3 /DME oxidation. Detailed kinetic analyses using the mechanism helped us understand the observed effects of DME addition and initial pressure on the laminar burning velocity. The linear increase of laminar burning velocity with increasing DME fraction is mainly attributed to the enhancement of both thermal effect and chemical kinetics effect, while the negative influence of initial pressure is because of the decrease of chemical kinetics effect. In addition, it was found that the main reaction pathways based on N-atom shift with DME addition, whereas those based on C-atom vary little. Furthermore, pressure power exponent beta as a function of equivalence ratio shows different behaviors for different DME fractions due to the competition between NH 2 and CH 3 chain-termination reactions for the rich flames. The present work provides experimental measurements of the laminar burning velocity at various conditions and insights into the chemical kinetics for NH 3 /DME/air mixtures. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available