☆ 4.7 Article

Fouling mechanisms in ultrafiltration under constant flux: Effect of feed spacer design

CHEMICAL ENGINEERING JOURNAL (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Azo dye containing wastewater treatment in earthen membrane based unplanted two chambered constructed wetlands-microbial fuel cells: A new design for enhanced performance

Yamini Mittal et al.

Summary: This study developed an innovative earthen membrane-based two-chambered constructed wetland cum microbial fuel cell system that effectively removed azo dye and chemical oxygen demand while reducing toxicity to plants in wastewater. Through UV-visible spectrum and gas chromatography-mass spectrometry analysis, the presence of intermediates and mineralized compounds in the wastewater was confirmed.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Engineering, Electrical & Electronic

A review of surface roughness impact on dielectric film properties

Guanghui Song et al.

Summary: Surface roughness plays a crucial role in determining the external properties of dielectric materials, with lower roughness generally benefiting the dielectric properties. Appropriate roughness enhances properties such as adhesion, filtration, and tribological properties, while also impacting the mechanical, thermal, physical, and magnetic properties of dielectric films. Control and measurement techniques for surface roughness are essential for understanding and characterizing dielectric materials.

IET NANODIELECTRICS (2022)

Add to Collection

Article Engineering, Chemical

3D printed honeycomb-shaped feed channel spacer for membrane fouling mitigation in nanofiltration

Sanghun Park et al.

Summary: The novel honeycomb-shaped spacer demonstrates superior fouling mitigation performance and permeate production compared to the standard diamond-shaped spacer, leading to improved filtration efficiency in the membrane system. This is attributed to the thinner foulant layer formed and the generation of high-magnitude turbulent kinetic energy within the spacer filaments.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Artificial intelligence as a sustainable tool in wastewater treatment using membrane bioreactors

Mohammadreza Kamali et al.

Summary: Efforts are underway to commercialize MBR technologies developed at laboratory and pilot scale, with a focus on improving efficiency, sustainability, reliability, and cost-effectiveness. The adoption of AI is expected to have a positive impact on these criteria. However, further efforts are needed to improve the match between AI predictions and experimental results, especially in dealing with high strength and highly polluted effluents.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Forward osmosis for industrial effluents treatment - sustainability considerations

Ashesh Mahto et al.

Summary: Access to clean water resources is a global challenge, especially in developing countries. Membrane technologies have advantages in dealing with effluents, but FO technologies are plagued with drawbacks such as fouling and ICP, which increase operation costs.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Comparison of fouling behaviors between activated sludge suspension in MBR and EPS model solutions: A new combined model

Ge Hu et al.

Summary: A three-mechanism model was established in this study to describe the fouling behavior of activated sludge suspension in constant flux cross-flow filtration, showing good agreement with experimental data for various substances. The model predicted the fouling behavior accurately for different substances and showed that the variations in cake resistance and membrane area ratio were dependent on filtration flux and MLSS concentration.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Combined alginate-humic acid fouling mechanism and mitigation during microfiltration: Effect of alginate viscosity

Dagmar Olafsdottir et al.

Summary: The study found that humic acid can accelerate alginate fouling under both dead-end and crossflow conditions with different filtration mechanisms. Intermittent relaxation during crossflow can alleviate medium viscosity alginate fouling. High temperature clean water flushing is the most effective way to maintain membrane performance.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficacy of Electrically-Polarized 3D Printed Graphene-blended Spacers on the Flux Enhancement and Scaling Resistance of Water Filtration Membranes

Numan Yanar et al.

Summary: The study introduces an electrically polarized graphene-polylactic acid (E-GRP) spacer for the first time, demonstrating its enhanced water flux and anti-scaling properties in an osmotic-driven process.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Understanding the roles of patterning and foulant chemistry on nanofiltration threshold flux

Anna Malakian et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Maximizing the grafting of zwitterions onto the surface of ultrafiltration membranes to improve antifouling properties

Nima Shahkaramipour et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Review Engineering, Chemical

Thinking the future of membranes: Perspectives for advanced and new membrane materials and manufacturing processes

Suzana P. Nunes et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Spinel-based ceramic membranes coupling solid sludge recycling with oily wastewater treatment

Mingliang Chen et al.

WATER RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Membrane fouling quantification by specific cake resistance and flux enhancement using helical cleaners

Noreddine Ghaffour et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Review Environmental Sciences

Environmental impact of desalination technologies: A review

Khaled Elsaid et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Environmental Sciences

Environmental impact of desalination processes: Mitigation and control strategies

Khaled Elsaid et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Engineering, Chemical

Impacts of feed spacer design on UF membrane cleaning efficiency

Nurshaun Sreedhar et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Environmental Sciences

A comparison of variations in blocking mechanisms of membrane-fouling models for estimating flux during water treatment

Imtiaz Afzal Khan et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Chemical

Fouling mechanisms in constant flux crossflow ultrafiltration

Alon Y. Kirschner et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Spacer vibration for fouling control of submerged flat sheet membranes

Bing Wu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Review Engineering, Chemical

Membrane-based separation of potential emerging pollutants

Suhas P. Dharupaneedi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Environmental

Sustainability considerations in membrane-based technologies for industrial effluents treatment

Mohammadreza Kamali et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Chemical

3D printed spacers for organic fouling mitigation in membrane distillation

Erik Hugo Cabrera Castillo et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

3D printed spacers based on TPMS architectures for scaling control in membrane distillation

Navya Thomas et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Antifouling Feed Spacer Made from a Carbon Nanotube-Polypropylene Nanocomposite

Hiroki Kitano et al.

ACS OMEGA (2019)

Add to Collection

Article Environmental Sciences

Investigation of the performance behavior of a forward osmosis membrane system using various feed spacer materials fabricated by 3D printing technique

Numan Yanar et al.

CHEMOSPHERE (2018)

Add to Collection

Review Engineering, Chemical

Membrane fouling in desalination and its mitigation strategies

P. S. Goh et al.

DESALINATION (2018)

Add to Collection

Article Engineering, Chemical

3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF

Nurshaun Sreedhar et al.

DESALINATION (2018)

Add to Collection

Article Engineering, Chemical

3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation

Navya Thomas et al.

DESALINATION (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Fabrication of carboxylated cellulose nanocrystal/sodium alginate hydrogel beads for adsorption of Pb(II) from aqueous solution

Zhao-Hong Hu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Chloroquine diphosphate bearing dextran nanoparticles augmented drug delivery and overwhelmed drug resistance in Plasmodium falciparum parasites

Aman Kashyap et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Engineering, Chemical

Mass transfer analysis of ultrafiltration using spacers based on triply periodic minimal surfaces: Effects of spacer design, directionality and voidage

Nurshaun Sreedhar et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Fouling resilient perforated feed spacers for membrane filtration

Sarah Kerdi et al.

WATER RESEARCH (2018)

Add to Collection

Article Engineering, Civil

Microfiltration and ultrafiltration membranes for drinking water

JOURNAL AMERICAN WATER WORKS ASSOCIATION (2018)

Add to Collection

Article Engineering, Environmental

Development of anti-biofouling feed spacers to improve performance of reverse osmosis modules

Douglas Rice et al.

WATER RESEARCH (2018)

Add to Collection

Article Engineering, Chemical

Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication

Wen See Tan et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Engineering, Chemical

Effect of calcium ions on fouling properties of alginate solution and its mechanisms

Meijia Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Recycling of end-of-life reverse osmosis membranes by oxidative treatment: a technical evaluation

Eduardo Coutinho de Paula et al.

WATER SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Review Environmental Sciences

Water scarcity assessments in the past, present, and future

Junguo Liu et al.

EARTHS FUTURE (2017)

Add to Collection

Review Engineering, Chemical

A review of efforts to reduce membrane fouling by control of feed spacer characteristics

Hadeel Subhi Abid et al.

DESALINATION (2017)

Add to Collection

Article Engineering, Chemical

Membrane-based seawater desalination: Present and future prospects

Gary Amy et al.

DESALINATION (2017)

Add to Collection

Review Engineering, Chemical

Nanomaterials for biofouling and scaling mitigation of thin film composite membrane: A review

C. S. Ong et al.

DESALINATION (2016)

Add to Collection

Article Engineering, Chemical

Effect of spacer and crossflow velocity on the critical flux of bidisperse suspensions in microfiltration

Henry J. Tanudjaja et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

The potential to enhance membrane module design with 3D printing technology

Jian-Yuan Lee et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection

Article Engineering, Environmental

Development and characterization of 3D-printed feed spacers for spiral wound membrane systems

Amber Siddiqui et al.

WATER RESEARCH (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Quantifying the potential of ultra-permeable membranes for water desalination

David Cohen-Tanugi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Review Engineering, Chemical

Membrane cleaning in membrane bioreactors: A review

Zhiwei Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Article Engineering, Environmental

Spacer geometry and particle deposition in spiral wound membrane feed channels

A. I. Radu et al.

WATER RESEARCH (2014)

Add to Collection

Review Engineering, Chemical

Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability

Noreddine Ghaffour et al.

DESALINATION (2013)

Add to Collection

Article Engineering, Chemical

The impact of flux and spacers on biofilm development on reverse osmosis membranes

S. R. Suwarno et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Add to Collection

Article Engineering, Environmental

Short-term adhesion and long-term biofouling testing of polydopamine and poly(ethylene glycol) surface modifications of membranes and feed spacers for biofouling control

Daniel J. Miller et al.

WATER RESEARCH (2012)

Add to Collection

Review Engineering, Environmental

Development of antifouling reverse osmosis membranes for water treatment: A review

Guo-dong Kang et al.

WATER RESEARCH (2012)

Add to Collection

Article Chemistry, Physical

Critical, sustainable and threshold fluxes for membrane filtration with water industry applications

Robert W. Field et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2011)

Add to Collection

Article Engineering, Chemical

Systematic study on calcium-alginate interaction in a hybrid coagulation-nanofiltration system

Karina Listiarini et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Engineering, Chemical

Engineering aspects of reverse osmosis module design

Jon Johnson et al.

DESALINATION AND WATER TREATMENT (2010)

Add to Collection

Article Engineering, Environmental

Biofouling of spiral-wound nanofiltration and reverse osmosis membranes: A feed spacer problem

J. S. Vrouwenvelder et al.

WATER RESEARCH (2009)

Add to Collection

Article Engineering, Chemical

State-of-the-art of reverse osmosis desalination

C. Fritzmann et al.

DESALINATION (2007)

Add to Collection

Article Engineering, Chemical

Improving dextran tests for ultrafiltration membranes: Effect of device format

Andrew L. Zydney et al.

JOURNAL OF MEMBRANE SCIENCE (2007)

Add to Collection

Review Engineering, Chemical

Spiral wound modules and spacers - Review and analysis

J Schwinge et al.

JOURNAL OF MEMBRANE SCIENCE (2004)

Add to Collection

Article Engineering, Chemical

The effect of filament orientation on critical flux and particle deposition in spacer-filled channels

PR Neal et al.

JOURNAL OF MEMBRANE SCIENCE (2003)

Add to Collection

Article Chemistry, Physical

A combined pore blockage and cake filtration model for protein fouling during microfiltration

CC Ho et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.