☆ 4.7 Article

Interfacial engineering strategy based on polymer modification to regulate the residual stress in CsPbI2Br based perovskite solar cells

CHEMICAL ENGINEERING JOURNAL (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Strain relaxation and domain enlargement via phase transition towards efficient CsPbI2Br solar cells

Fa-Zheng Qiu et al.

Summary: A new growth approach is developed for the deposition of CsPbI2Br films, which reduces the tensile strain and increases the domain size, resulting in CsPbI2Br films with lower defect density and better stability. The photovoltaic cells prepared using this approach achieve high efficiency and open circuit voltage, and they maintain their efficiency under relative humidity and high temperature conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Multidisciplinary Sciences

Preserving a robust CsPbI3 perovskite phase via pressure-directed octahedral tilt

Feng Ke et al.

Summary: By manipulating the stability of inorganic lead halide perovskites through high pressure treatment and structural deformation induced at high pressure, the authors have synthesized a CsPbI3 perovskite phase that is preserved at ambient conditions, potentially enhancing material functionality.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Modifying Surface Termination of CsPbI3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics

Tiantian Liu et al.

Summary: In order to improve the performance of all-inorganic perovskite solar cells, an ultra-thin 2D perovskite is used to terminate CsPbI3 grain boundaries, enhancing charge-carrier extraction and transport while effectively suppressing nonradiative recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

One-Source Strategy Boosting Dopant-Free Hole Transporting Layers for Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells

Xinqi Li et al.

Summary: A one-source strategy using the same polymer donor material is proposed to simultaneously dope CsPbI2Br perovskite films and fabricate the hole transport layer, leading to improved film quality and enhanced device performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Tetrabutylammonium Cation Intercalation to Heal Inorganic CsPbI3 Perovskite

Xiaomin Liu et al.

Summary: Intercalation of TBA cation into CsPbI3 to form TBAPbI(3) protective layer helps to heal defects, resulting in enhanced stability and efficiency of perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Synergistic Effect of Lewis Base Polymers and Graphene in Enhancing the Efficiency of Perovskite Solar Cells

Qiang Lou et al.

Summary: The incorporation of Lewis base polymers into a perovskite layer has been shown to passivate trap states at the grain boundaries, but the low electrical conductivity of polymers can hinder charge transport. A new strategy utilizing highly conductive graphene/Lewis base polymer composites as additives in perovskite was reported, leading to improved device efficiency and stability due to enhanced hole-transport selectivity in graphene. The designed perovskite device achieved an outstanding efficiency of 21.21% and retained 90% of its initial power conversion efficiency after aging for 480 hours in ambient air at room temperature with 35% relative humidity.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and Stable CsPbI3 Inorganic Perovskite Photovoltaics Enabled by Crystal Secondary Growth

Xingtao Wang et al.

Summary: This study demonstrates defect compensation in CsPbI3 perovskite through crystal secondary growth induced by a solid-state reaction, resulting in highly efficient inorganic photovoltaics. The secondary growth process involving a bromine salt can heal defects, improve charge dynamics, enhance phase stability, and deliver a solar cell efficiency of 20.04% with excellent operational stability.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An Effective Strategy of Combining Surface Passivation and Secondary Grain Growth for Highly Efficient and Stable Perovskite Solar Cells

Dongyu Ma et al.

Summary: A pincer strategy combining surface passivation and secondary grain growth (SGG) was proposed to modify the external and internal of CH3NH3PbI3 perovskite. The modified perovskites showed improved crystallinity, lower trap densities, and tuned energy levels, leading to higher power conversion efficiency (PCE) and enhanced device stability. The strategy provides an effective approach for developing efficient and stable perovskite solar cells (PSCs).

SMALL (2021)

Add to Collection

Article Chemistry, Physical

π-Conjugated Small Molecules Modified SnO2 Layer for Perovskite Solar Cells with over 23% Efficiency

Qiang Lou et al.

Summary: This work presents a new type of SnO2 passivator, which improves the efficiency of perovskite solar cells by optimizing molecular stacking to enhance interfacial characteristics. The impressive power conversion efficiency over 23% achieved with this new passivator is among the highest reported values for triple-cation perovskite systems to date.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Perovskitoid-Templated Formation of a 1D@3D Perovskite Structure toward Highly Efficient and Stable Perovskite Solar Cells

Tengfei Kong et al.

Summary: Using low dimensional perovskite is a promising strategy to improve the stability and efficiency of PSCs, achieving highly efficient and stable devices with good reproducibility. The 1D@3D PSC demonstrated high conversion efficiency and maintained high performance under different conditions in the experiment.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

Teoman Ozturk et al.

Summary: The study presents a method of tuning CsPbI2Br crystallization by incorporating FeCl2 into the perovskite precursor. The introduction of FeCl2 stabilizes the crystal phase, improves efficiency and stability of the photovoltaic devices.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Humidity-Assisted Chlorination with Solid Protection Strategy for Efficient Air-Fabricated Inverted CsPbI3 Perovskite Solar Cells

Sheng Fu et al.

Summary: Humidity-assisted chlorination with solid protection via Si-Cl incorporation is effective for reducing moisture erosion during deposition of CsPbI3 perovskite solar cells in air. The solid protection from Si-OH helps improve the crystallization and phase stability of CsPbI3, resulting in high efficiency and moisture tolerance.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Lewis bases: promising additives for enhanced performance of perovskite solar cells

Seema Wafee et al.

Summary: Lead halide perovskite is a promising photovoltaic material due to its rapid efficiency growth, but issues with instability and toxicity remain challenges. Using multifunctional additives to increase grain size and passivate defects for enhanced stability is a popular approach. Many recent articles focus on additive engineering for perovskite improvement.

MATERIALS TODAY ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improved phase stability of CsPbI2Br perovskite by released microstrain toward highly efficient and stable solar cells

Kanghui Zheng et al.

Summary: This study proposes a novel approach by designing a pi-conjugated p-type molecule to alleviate local stress in inorganic perovskite film and enhance the phase stability of all-inorganic perovskite solar cells. Through a series of characterizations, it was found that weaker local stresses contribute to superior phase stability, resulting in outstanding power conversion efficiency of up to 16.25% in PSCs based on CsPbI2Br perovskite system.

INFOMAT (2021)

Add to Collection

Article Chemistry, Physical

Multifunctional CNT:TiO2 additives in spiro-OMeTAD layer for highly efficient and stable perovskite solar cells

Qiang Lou et al.

Summary: The hole transport layer (HTL) is crucial for the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). By incorporating CNT:TiO2, the spiro-OMeTAD+CNT:TiO2 not only enhances conductivity significantly, but also effectively passivates the crystal defects of the perovskite layer. The optimized PSCs with spiro-OMeTAD+CNT:TiO2 HTL achieved a peak PCE of 21.53%, much higher than conventional spiro-OMeTAD based PSCs and showed improved stability.

ECOMAT (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A review on the stability of inorganic metal halide perovskites: challenges and opportunities for stable solar cells

Wanchun Xiang et al.

Summary: Inorganic perovskite based solar cells have garnered global attention for their high thermal stability and theoretical power conversion efficiencies. However, their poorer phase stability compared to hybrid counterparts requires further research. This review summarizes the progress in stability research on inorganic perovskites, focusing on degradation mechanisms towards temperature, moisture, and oxygen.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fully Air-Processed Dynamic Hot-Air- Assisted M:CsPbI2Br (M: Eu2+, In3+) for Stable Inorganic Perovskite Solar Cells

Sawanta S. Mali et al.

Summary: By developing a new method to prepare all-inorganic perovskite solar cells with excellent thermal stability, the efficiency and stability of the devices have been significantly improved through the doping of metal ions. The optimized cells show a high power conversion efficiency and robustness, maintaining high efficiency even in high temperature environments.

MATTER (2021)

Add to Collection

Article Chemistry, Physical

Stability of all-inorganic perovskite solar cells

Nabonswende Aida Nadege Ouedraogo et al.

NANO ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Strain engineering and epitaxial stabilization of halide perovskites

Yimu Chen et al.

NATURE (2020)

Add to Collection

Review Chemistry, Physical

All-Inorganic Perovskite Solar Cells: Energetics, Key Challenges, and Strategies toward Commercialization

M. Bilal Faheem et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Regulating strain in perovskite thin films through charge-transport layers

Ding-Jiang Xue et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Dual Interfacial Engineering Enables Efficient and Reproducible CsPbI2Br All-Inorganic Perovskite Solar Cells

Yao Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

In situ observation of δ phase suppression by lattice strain in all-inorganic perovskite solar cells

Wei Hui et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI2Br Solar Cells

Yu-Xin Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Making air-stable all-inorganic perovskite solar cells through dynamic hot-air

Sawanta S. Mali et al.

NANO TODAY (2020)

Add to Collection

Article Chemistry, Physical

Tailoring In Situ Healing and Stabilizing Post-Treatment Agent for High-Performance Inverted CsPbI3 Perovskite Solar Cells with Efficiency of 16.67%

Sheng Fu et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dopant free mixture of Spiro-OMeTAD and PTAA with tunable wettability as hole transport layer enhancing performance of inverted CsPbI2Br perovskite solar cells

Ying Yang et al.

ORGANIC ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

Cu12Sb4S13 Quantum Dots with Ligand Exchange as Hole Transport Materials in All-Inorganic Perovskite CsPbI3 Quantum Dot Solar Cells

Yueli Liu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Crystalline Liquid-like Behavior: Surface-Induced Secondary Grain Growth of Photovoltaic Perovskite Thin Film

Jingjing Xue et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Efficient Passivation with Lead Pyridine-2-Carboxylic for High-Performance and Stable Perovskite Solar Cells

Sheng Fu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hole-Boosted Cu(Cr,M)O2 Nanocrystals for All-Inorganic CsPbBr3 Perovskite Solar Cells

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

The distinctive phase stability and defect physics in CsPbI2Br perovskite

Yuxuan Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells

Wanchun Xiang et al.

JOULE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Doping with SnBr2 in CsPbBr3 to enhance the efficiency of all-inorganic perovskite solar cells

Haiyan Guo et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Physical

Divalent hard Lewis acid doped CsPbBr3 films for 9.63%-efficiency and ultra-stable all-inorganic perovskite solar cells

Yuanyuan Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

High Efficiency (16.37%) of Cesium Bromide-Passivated All-Inorganic CsPbI2Br Perovskite Solar Cells

Yuqing Zhang et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Purity Inorganic Perovskite Films for Solar Cells with 9.72% Efficiency

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Surface-enhanced Raman scattering on organic-inorganic hybrid perovskites

Xiaoyue Su et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

All-Inorganic CsPbI2Br Perovskite Solar Cells with High Efficiency Exceeding 13%

Chong Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Highly efficient overall water splitting driven by all-inorganic perovskite solar cells and promoted by bifunctional bimetallic phosphide nanowire arrays

Lianbo Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%

Kang Wang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon Nanotube Based Inverted Flexible Perovskite Solar Cells with All-Inorganic Charge Contacts

Qiang Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

Haijun Bin et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Semitransparent inverted polymer solar cells employing a sol-gel-derived TiO2 electron-selective layer on FTO and MoO3/Ag/MoO3 transparent electrode

Fumin Li et al.

NANOSCALE RESEARCH LETTERS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.