☆ 4.7 Article

Patterning the surface structure of transparent hard-brittle material β-Ga2O3 by ultrashort pulse laser

CERAMICS INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Physics, Applied

A perspective on β-Ga2O3 micro/nanoelectromechanical systems

Xu-Qian Zheng et al.

Summary: Beta gallium oxide is an emerging semiconductor material with attractive properties for future electronics and sensors. This article provides an overview of the development of beta gallium oxide micro/nanomechanical systems and discusses their potential applications in power and RF electronics. The article also addresses challenges and proposes strategies for the future development of beta gallium oxide M/NEMS.

APPLIED PHYSICS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Pulse laser precision truing of the V-shaped coarse-grained electroplating CBN grinding wheel

Bing Guo et al.

Summary: This study proposed a precise and efficient pulse laser truing method for V-shaped coarse-grained electroplated cubic boron nitride (CBN) grinding wheel. The results showed that this method can improve the grinding performance of the wheel and reduce the truing time.

MATERIALS & DESIGN (2022)

Add to Collection

Article Chemistry, Physical

Temperature-dependent Raman and photoluminescence of β-Ga2O3 doped with shallow donors and deep acceptors impurities

Kun Zhang et al.

Summary: Ion doping technology with precise control of doping concentration and configuration can optimize the performance of beta-phase gallium oxide (beta-Ga2O3) high-power electronic and optoelectronic devices. By separately doping shallow-donor Si and deep-acceptor Mg impurities in beta-Ga2O3 using the EFG method, the study found that the Si-doped sample has higher stability at different temperatures, while the local atomic configurations of Mg impurities can be more easily/significantly affected by temperature. The research provides valuable insights for the application of ion-doped beta-Ga2O3 optoelectronic devices.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Femtosecond laser micromachining of GaN using different wavelengths from near-infrared to ultraviolet

L. K. Nolasco et al.

Summary: This study investigates the incubation effect during fs-laser micromachining of gallium nitride films with three different wavelengths, revealing that GaN requires more overlapping pulses for incubation at green and infrared excitation, while ultraviolet excitation achieves incubation faster. Additionally, the micromachining mechanism is dominated by multiphoton ionization at 343 nm and 515 nm, while other effects such as tunneling ionization also contribute at 1030 nm.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of diamond wire saw slicing parameters on (010) lattice plane beta-gallium oxide single crystal wafer

Pengcheng Gao et al.

Summary: This paper investigates the effect of process parameters of reciprocating diamond wire saw on the surface quality of (010) lattice plane beta-Ga2O3 single crystal. A numerical model is established to reduce the depth of subsurface damage layer and improve the surface quality of the wafer, which is verified by slicing experiments. Increasing wire speed or decreasing feed rate can effectively improve the surface quality of the wafer.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Add to Collection

Article Materials Science, Ceramics

Optimisation of spray-mist-assisted laser machining of micro-structures on CVD diamond coating surfaces

Zhenfei Guo et al.

Summary: Spray-mist-assisted laser machining can effectively remove the recast layer and ensure the precision and continuity of laser machining. The most significant factor affecting the cross-sectional area of the grooves is laser power, while laser power and scanning speed significantly affect the depth-to-width ratio of the grooves.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Femtosecond Laser Writing of Spin Defects in Hexagonal Boron Nitride

Xingyu Gao et al.

Summary: The study demonstrates that optically addressable spin ensembles can be generated in hBN through femtosecond laser irradiation, with the creation of spin defects strongly influenced by the pulse energy of the laser. Proper laser parameters can lead to successful generation of spin defects, showcasing promising prospects for quantum technologies.

ACS PHOTONICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of fused silica microstructure based on the femtosecond laser

Dunxiang Jian et al.

Summary: This study focuses on processing fused silica microstructures using femtosecond lasers and determining optimal laser parameters for high-quality manufacturing. The resonant structure of the butterfly gyroscope was used to verify the method, achieving steepness and roughness values with optimized laser parameters. These results are expected to support the development of high-performance fused silica dynamic devices in the future.

AIP ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultra-High Performance Amorphous Ga2O3 Photodetector Arrays for Solar-Blind Imaging

Yuan Qin et al.

Summary: This study focuses on ultrahigh-performance metal-semiconductor-metal (MSM) solar-blind photodetectors (SBPDs) based on post-annealed amorphous (a-) Ga2O3, demonstrating superhigh sensitivity and response speed, as well as ultrahigh photo-to-dark current ratio and specific detectivity, indicating practicality for applications in solar-blind imaging, environmental monitoring, artificial intelligence, and machine vision.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Laser damage mechanism and in situ observation of stacking fault relaxation in a β-Ga2O3 single crystal by the EFG method

Bo Fu et al.

Summary: An original and effective method was designed to study the laser damage mechanism of a beta-Ga2O3 crystal, revealing four typical crystal defects and building up a laser damage mechanism in the beta-Ga2O3 subsurface layer for the first time. In situ observation of stacking fault relaxation and the luminescence properties of the faults were also demonstrated.

CRYSTENGCOMM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Microchannel-Confined Crystallization Strategy Enables Blade Coating of Perovskite Single Crystal Arrays for Device Integration

Deng Wei et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Tunable Properties of Novel Ga2O3 Monolayer for Electronic and Optoelectronic Applications

Yikai Liao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Broad-Band Ultra-Low-Reflectivity Multiscale Micro-Nano Structures by the Combination of Femtosecond Laser Ablation and In Situ Deposition

Tong Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Optics

Recent Advances in Femtosecond Laser Processing of LiNbO3Crystals for Photonic Applications

Bin Zhang et al.

LASER & PHOTONICS REVIEWS (2020)

Add to Collection

Article Optics

Dynamic pulse propagation modelling for predictive femtosecond-laser-microbonding of transparent materials

Pankaj K. Sahoo et al.

OPTICS EXPRESS (2020)

Add to Collection

Article Multidisciplinary Sciences

Femtosecond laser programmed artificial musculoskeletal systems

Zhuo-Chen Ma et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Confocal photoluminescence characterization of silicon-vacancy color centers in 4H-SiC fabricated by a femtosecond laser

Jiayu Liu et al.

NANOTECHNOLOGY AND PRECISION ENGINEERING (2020)

Add to Collection

Article Automation & Control Systems

A study on the micromachining of molybdenum using nanosecond and femtosecond lasers

Mobin M. Mathew et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Laser Writing of Scalable Single Color Centers in Silicon Carbide

Yu-Chen Chen et al.

NANO LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Spatially Modulating the Fluorescence Color of Mixed-Halide Perovskite Nanoplatelets through Direct Femtosecond Laser Writing

Chunhua Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Physics, Applied

Surface morphology and straight crack generation of ultrafast laser irradiated -Ga2O3

Minhyung Ahn et al.

JOURNAL OF APPLIED PHYSICS (2019)

Add to Collection

Article Optics

Bright near-surface silicon vacancy centers in diamond fabricated by femtosecond laser ablation

Youying Rong et al.

OPTICS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

GaN microstructure light-emitting diodes directly fabricated on tungsten-metal electrodes using a micro-patterned graphene interlayer

Kunook Chung et al.

NANO ENERGY (2019)

Add to Collection

Article Optics

Three-dimensional femtosecond laser nanolithography of crystals

Airan Rodenas et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effect of chemical action on the chemical mechanical polishing of β-Ga2O3(100) substrate

Chuanjin Huang et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Review Chemistry, Physical

β-Ga2O3 nanowires and thin films for metal oxide semiconductor gas sensors: Sensing mechanisms and performance enhancement strategies

Adeel Afzal

JOURNAL OF MATERIOMICS (2019)

Add to Collection

Article Materials Science, Ceramics

Micromachining of 4H-SiC using femtosecond laser

Ru Zhang et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Optics

Influence of processing parameters on the structure size of microchannel processed by femtosecond laser

Chen Lei et al.

OPTICS AND LASER TECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Lifetime laser damage performance of beta-Ga2O3 for high power applications

Jae-Hyuck Yoo et al.

APL MATERIALS (2018)

Add to Collection

Review Chemistry, Analytical

Topic Review: Application of Raman Spectroscopy Characterization in Micro/Nano-Machining

Zongwei Xu et al.

MICROMACHINES (2018)

Add to Collection

Article Optics

Femtosecond laser direct writing of microholes on roughened ZnO for output power enhancement of InGaN light-emitting diodes

Zhigang Zang et al.

OPTICS LETTERS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Femtosecond laser induced phenomena in transparent solid materials: Fundamentals and applications

Dezhi Tan et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Physics, Applied

Wavelength dependence of femtosecond laser-induced damage threshold of optical materials

L. Gallais et al.

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

Article Optics

Laser-induced damage of optical thin films submitted to 343, 515, and 1030 nm multiple subpicosecond pulses

Dam-Be Douti et al.

OPTICAL ENGINEERING (2014)

Add to Collection

Article Optics

Comparative numerical study of energy deposition in femtosecond laser microfabrication with fundamental and second harmonics of Yb-doped laser

A. Dostovalov et al.

LASER PHYSICS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Ultraviolet-infrared femtosecond laser-induced damage in fused silica and CaF2 crystals

TQ Jia et al.

PHYSICAL REVIEW B (2006)

Add to Collection

Review Chemistry, Physical

Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses

SK Sundaram et al.

NATURE MATERIALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.