☆ 4.7 Article

Lightweight porous silica-alumina ceramics with ultra-low thermal conductivity

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Lightweight porous silica ceramics with ultra-low thermal conductivity and enhanced compressive strength

Xianxi Li et al.

Summary: The demand for high-performance lightweight thermal insulation materials in reusable spacecraft and vehicles has led to the development of porous silica ceramics with lightweight, ultra-low thermal conductivity, and enhanced compressive strength. By using different sizes of silica particles, the compressive strength and pore structure integrity of the ceramics were improved. These ceramics have a very low thermal conductivity and are suitable for use as thermal insulation materials in aerospace and space applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Oil soluble surfactants as efficient foam stabilizers

Fatmegyul Mustan et al.

Summary: The study compared the surface and foam properties of oil-soluble surfactants and water-soluble surfactants in sugar-rich solutions. It found that foams formed with oil-soluble surfactants in sugar-rich solutions remain stable for more than 10 days due to multilamellar vesicles increasing viscosity and slowing down water drainage. Foams formed with Span 60 are more stable compared to Brij 72, while those formed with Brij S20 are the least stable, being completely destroyed after 1 day at room temperature.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Chemistry, Applied

Bioactive food foams stabilized by licorice extract/whey protein isolate/ sodium alginate ternary complexes

Majid Nooshkam et al.

Summary: Interactions among multi-component food matrices were found to play a key role in modulating foam properties. Foams formed using sodium alginate, whey protein isolate, and licorice extract exhibited high overrun, air-volume fraction, physical stability, antioxidant activity, and solid-like behavior.

FOOD HYDROCOLLOIDS (2022)

Add to Collection

Article Materials Science, Ceramics

A new mullite foamed ceramic prepared by direct-foaming methods in parallel with a mechanical activation technique

Wenying Zhou et al.

Summary: This study investigated the preparation and performance of mullite foamed ceramics using a direct-foaming method and mechanical activation technique. The smaller particle size obtained through mechanical activation improved the compressive strength of the ceramics. Finite element simulation confirmed the importance of dense strut structures in enhancing the strength of the ceramics. Additionally, a novel model combining thermal conduction and thermal radiation was proposed to predict the thermal conductivity of the ceramics at high temperatures.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Low density, three-dimensionally interconnected carbon nanotube/silicon carbide nanocomposites for thermal protection applications

Karim Aly et al.

Summary: This study successfully fabricated anisotropic and low-density carbon nanotube/SiC core-shell structures with excellent mechanical strength and heat resistance. The preparation method is simple and scalable, and the density of the synthesized SiC nanotubes is the lowest reported.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Preparation of calcium hexaluminate porous ceramics by novel pectin based gelcasting freeze-drying method

Lei Yuan et al.

Summary: High-purity calcium hexaluminate (CA(6)) porous ceramics were prepared using a novel pectin based gelcasting freeze-drying method, with investigations on the effects of solid content on material properties. The pores in CA(6) ceramics were mainly formed through water molecules sublimation and organic decomposition during freeze-drying. The ceramics exhibited high apparent porosity, low bulk density, low thermal conductivity, and relatively high compressive strength, meeting requirements for functional and structural applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Seed assisted in-situ synthesis of porous anorthite/mullite whisker ceramics by foam-freeze casting

Linghao Wu et al.

Summary: Porous anorthite/mullite whisker ceramics with high strength and low thermal conductivity were successfully prepared through a combination of seed-assisted in situ synthesis and foam-freeze casting techniques. The materials exhibited a high apparent porosity, low bulk density, high compressive strength, and low thermal conductivity, making them suitable for thermal insulating applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

lePreparation of porous diatomite ceramics by an alkali treatment near room temperature

Yuki Nakashima et al.

Summary: Porous diatomite ceramics were prepared by alkali treatment without sintering, forming solid crosslinking near room temperature. The amount and concentration of KOH solution were found to affect properties such as porosity, strength, and thermal conductivity. Mixing a higher concentration of KOH solution with the raw powder promoted dissolution and formation of thicker necks between particles, resulting in comparable properties to sintered materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Porous ceramics: Light in weight but heavy in energy and environment technologies

Yu Chen et al.

Summary: Porous ceramics, with their unique properties, are suitable for various energy and environmental applications. The desired pore structures and properties can be achieved through precise selection of materials and synthesis processes.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)

Add to Collection

Article Materials Science, Ceramics

Structure and performance control of porous Si3N4 ceramics fabricated by freeze-drying process

Mengyong Sun et al.

Summary: By adding glycerol and silica sol, the structure and performance of porous Si3N4 ceramics can be improved, such as changing pore structure, increasing mechanical properties and dielectric constant.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of hierarchical porous ultra-high temperature ceramics (ZrB2)

Mitchell L. Sesso et al.

Summary: A method for producing hierarchical multi-scale porous ultra-high temperature ceramics (zirconium diboride, ZrB2) using 3D printing has been developed. The ceramics exhibit high strength to density ratio, making them potentially suitable for insulation near very high-temperature surfaces in aerospace applications.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Thermal performance and ablation characteristics of C/C-SiC for thermal protection of hypersonic vehicle

Yi-ang Shi et al.

Summary: A small-scale plasma ablation facility was used to test the C/C-SiC composite material under two heat flux conditions, revealing different ablation characteristics in different regions, with specific reactions identified in each region.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

High-strength porous alumina ceramics prepared from stable wet foams

Linying Wang et al.

Summary: In this study, porous alumina with high porosity and high strength was prepared by a popular direct foaming method using particle-stabilized wet foam. The stability of wet foams was found to increase with increasing DTAC content, while it decreased with increasing PAA content. The resulting porous alumina ceramics exhibited high porosity, fine grain size, and good compressive strength.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Chemistry, Physical

Porous Alumina Ceramics with Multimodal Pore Size Distributions

Jonas Biggemann et al.

Summary: This study investigated the preparation of multimodal porous Al2O3 ceramics and their mechanical and thermal properties. The pore network of the samples can be tailored by adjusting the type and volume content of sacrificial templates, with fibrous templates improving bending strength and spherical templates reducing thermal conductivity.

MATERIALS (2021)

Add to Collection

Article Polymer Science

Thermal Stability of Gel Foams Stabilized by Xanthan Gum, Silica Nanoparticles and Surfactants

Youjie Sheng et al.

Summary: This study investigates the potential application prospects and characteristics of foams stabilized by nanoparticles, water-soluble polymers, and surfactants in the development of firefighting foams. The addition of NPs and XG improves foam stability and thermal stability, while slowing down foam drainage and coarsening.

GELS (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructural evolution of mullite nanofibrous aerogels with different ice crystal growth inhibitors

Liang Xian et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Highly porous silica foams prepared via direct foaming with mixed surfactants and their sound absorption characteristics

Zhongpei Du et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Fabrication and characterization of a mullite-foamed ceramic reinforced by in-situ SiC whiskers

Wenying Zhou et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication and properties of silica/mullite porous ceramic by foam-gelcasting process using silicon kerf waste as raw material

Yang Han et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Chemistry, Physical

Fabrication, characterization and thermal-insulation modeling of foamed mullite-SiC ceramics

Wenying Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Ceramics

Hierarchically porous lanthanum zirconate foams with low thermal conductivity from particle-stabilized foams

Xuanyu Meng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

3D printing of porous SiC ceramics added with SiO2 hollow microspheres

Xiaomei Sun et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stable liquid foams from a new polyfluorinated surfactant

Maria Russo et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Ceramics

Ultralight and high-strength bulk alumina/zirconia composite ceramic foams through direct foaming method

Wenlong Huo et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Effect of zeta potential on properties of foamed colloidal suspension

Wenlong Huo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Porous silica/mullite ceramics prepared by foam-gelcasting using silicon kerf waste as raw material

Lingjie Zhou et al.

MATERIALS LETTERS (2019)

Add to Collection

Article Materials Science, Ceramics

Preparation and characterization of eco-friendly and low-cost mullite-corundum foamed ceramics with low thermal conductivity

Zheng Zhang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

A novel aqueous gel-casting for fabricating Al2O3-bonded fibrous mullite ceramics

Lei Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Ceramics

Aerogel-like ceramic foams with super-high porosity and nanoscale cell wall from sol nanoparticles stabilized foams

Wenlong Huo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Highly porous barium strontium titanate (BST) ceramic foams with low dielectric constant from particle-stabilized foams

Wenlong Huo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Preparation of homogeneous mullite-based fibrous ceramics by starch consolidation

Wenjie Zang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Fiber reinforced highly porous gamma-Y2Si2O7 ceramic fabricated by foam-gelcasting-freeze drying method

Zhen Wu et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Ceramics

Preparation and characterization of mullite foam ceramics with porous struts from white clay and industrial alumina

Wenying Zhou et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Ceramics

Silica aerogels having high flexibility and hydrophobicity prepared by sol-gel method

Yue Zhao et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Composite Foaming Agents on the Basis of High-Molecular Natural Surfactants

Fariza Amankeldi et al.

COLLOIDS AND INTERFACES (2018)

Add to Collection

Article Materials Science, Ceramics

Thermo-structural design of ZrB2-SiC-based thermal protection system for hypersonic space vehicles

Anupam Purwar et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Al2O3-TiO2/ZrO2-SiO2 based porous ceramics from particle-stabilized wet foam

Bijay Basnet et al.

JOURNAL OF ADVANCED CERAMICS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics

Clara Minas et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Effects of microsilica addition on the microstructure and properties of alumina foams

Keke Huang et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Pickering and Network Stabilization of Biocompatible Emulsions Using Chitosan-Modified Silica Nanoparticles

Lauriane Alison et al.

LANGMUIR (2016)

Add to Collection

Article Materials Science, Ceramics

Effect of amphiphile chain length on wet foam stability of porous ceramics

Naboneeta Sarkar et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Ceramics

Al2TiO5-mullite porous ceramics from particle stabilized wet foam

Naboneeta Sarkar et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Ceramics

Photocatalytic activity of reticulated ZnO porous ceramics in degradation of azo dye molecules

Alphan Kocakusakoglu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Review Materials Science, Ceramics

Processing and properties of advanced porous ceramics: An application based review

E. C. Hammel et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Macro-porous ceramics: processing and properties

T. Ohji et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

Add to Collection

Article Materials Science, Ceramics

Surface treatment of templates for fabrication of reticulated porous ceramics

Xi-peng Pu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

Add to Collection

Article Materials Science, Ceramics

Processing routes to macroporous ceramics: A review

Andre R. Studart et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrastable particle-stabilized foams

Urs T. Gonzenbach et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.