☆ 4.7 Article

Additive manufacturing of cellular structures from recycled soda-lime glass printing inks by robocasting

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration

Evangelos Daskalakis et al.

Summary: This study proposes a method for preparing polycaprolactone/bioglass scaffolds with pore size gradient by investigating the coupled effect between material composition and scaffold architecture. The results show that the addition of bioglass improves the mechanical properties and biological performance of the scaffolds.

POLYMERS (2022)

Add to Collection

Review Materials Science, Ceramics

A review of 3D printed porous ceramics

Feng Zhang et al.

Summary: This review paper introduces the 3D printing technologies for fabricating porous ceramic parts and discusses their properties and applications. There is currently a lack of systematic review on 3D printing of porous ceramics, and this review fills this gap. It also provides some perspectives on future research directions.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Ceramics

3d Printing of Porous Glass Products Using the Robocasting Technique

O. Derevianko et al.

Summary: This study comprehensively investigated the 3D printing of porous glass products using the robocasting technique. The preparation of glass-based pastes and the printing process were established, and recommendations for the printing of porous glass products were developed. Experimental tests were conducted to determine the optimal parameters for 3D printing, and a modification to the printing module was proposed. The heat treatment process and sintering of the printed samples were studied, resulting in glass samples with complex shapes and high porosity.

POWDER METALLURGY AND METAL CERAMICS (2022)

Add to Collection

Article Environmental Sciences

Green Glass Foams from Wastes Designed for Thermal Insulation

N. P. Stochero et al.

Summary: Glass foams were successfully produced using discarded glass bottles and pine scales as pore former agents, with porosities between 78% and 86%, thermal conductivities between 0.072 and 0.093 W/mK, and compressive mechanical strengths between 0.2 and 3.4 MPa. These foams have potential for applications requiring thermal insulation and non-flammability.

WASTE AND BIOMASS VALORIZATION (2021)

Add to Collection

Review Construction & Building Technology

Foam 3D printing for construction: A review of applications, materials, and processes

Patrick Bedarf et al.

Summary: This review aimed to define the field of foam 3DP (F3DP) in construction and provide an overview of relevant developments, challenges, and future research by analyzing over 150 peer-reviewed articles and research reports. Three major themes within the academic debate about F3DP were identified: developments in material composition and design, printing and processing technologies, and future challenges in application and material processing. The review brings together promising advancements in F3DP for construction into a systematic overview and opens new horizons in research and development for sustainable construction processes.

AUTOMATION IN CONSTRUCTION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of Si2N2O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques

Haize Jin et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

3D printing boehmite gel foams into lightweight porous ceramics with hierarchical pore structure

Xiaoyan Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Direct Ink Writing Glass: A Preliminary Step for Optical Application

Bo Nan et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Sustainable glass-ceramic foams manufactured from waste glass bottles and bentonite

Fabiana Pereira da Costa et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams

Fabiana Pereira da Costa et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Mechanics

Rheological design of 3D printable all-inorganic inks using BiSbTe-based thermoelectric materials

Youngho Eom et al.

JOURNAL OF RHEOLOGY (2019)

Add to Collection

Article Chemistry, Applied

Colloidal Materials for 3D Printing

Cheng Zhu et al.

Annual Review of Chemical and Biomolecular Engineering (2019)

Add to Collection

Article Materials Science, Ceramics

Robocasting of ceramic glass scaffolds: Sol-gel glass, new horizons

Basam A. E. Ben-Arfa et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Environmental

Vitrocrystalline foams produced with EPS as pore former: Processing and characterization

E. G. de Moraes et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Chemistry, Physical

One step hydrothermal synthesis of TiO2 with variable HCl concentration: Detailed characterization and photocatalytic activity in propene oxidation

L. Cano-Casanova et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Temperature, Precursor Type and Dripping Time on the Crystallite Size of Nano ZnO Obtained by One-Pot Synthesis: 2k Full Factorial Design Analysis

Morgana de Medeiros Machado et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Architected cellular ceramics with tailored stiffness via direct foam writing

Joseph T. Muth et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Add to Collection

Article Engineering, Environmental

Glass foams produced from glass bottles and eggshell wastes

Marcelo T. Souza et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)

Add to Collection

Article Chemistry, Physical

3D printing of concentrated emulsions into multiphase biocompatible soft materials

Marianne R. Sommer et al.

SOFT MATTER (2017)

Add to Collection

Article Chemistry, Applied

Laponite as a rheology modifier of alginate solutions: Physical gelation and aging evolution

Jose Luis Davila et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics

Clara Minas et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printing of Lightweight Cellular Composites

Brett G. Compton et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Additive Manufacturing: the role of welding in this window of opportunity

Eduardo Andre Alberti et al.

SOLDAGEM & INSPECAO (2014)

Add to Collection

Article Mechanics

Thixotropic rheology of concentrated alumina colloidal gels for solid freeform fabrication

Cheng Zhu et al.

JOURNAL OF RHEOLOGY (2011)

Add to Collection

Article Engineering, Mechanical

The guide to glass 3D printing: developments, methods, diagnostics and results

Grant Marchelli et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Engineering, Biomedical

In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing

Joshua L. Simon et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)

Add to Collection

Article Engineering, Biomedical

Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications

P Miranda et al.

ACTA BIOMATERIALIA (2006)

Add to Collection

Article Materials Science, Ceramics

Processing routes to macroporous ceramics: A review

Andre R. Studart et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Engineering, Biomedical

Poly(D,L-lactic acid) coated 45S5 Bioglass®-based scaffolds:: Processing and characterization

Q. Z. Chen et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)

Add to Collection

Article Multidisciplinary Sciences

Conventional and novel processing methods for cellular ceramics

P Colombo

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)

Add to Collection

Article Engineering, Biomedical

Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds

S Michna et al.

BIOMATERIALS (2005)

Add to Collection

Article Biophysics

Biomechanics of cellular solids

LJ Gibson

JOURNAL OF BIOMECHANICS (2005)

Add to Collection

Article Engineering, Biomedical

Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs

KF Leong et al.

BIOMATERIALS (2003)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Effect of alkali ions on the amorphous to crystalline phase transition of silica

AM Venezia et al.

JOURNAL OF SOLID STATE CHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.