4.7 Article

Relating LC3 microstructure, surface resistivity and compressive strength development

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Critical assessment of rapid methods to qualify supplementary cementitious materials for use in concrete

Saif Al-Shmaisani et al.

Summary: This study evaluated several tests for supplementary cementitious materials (SCMs) to quickly screen out inert materials, measure overall reactivity, and differentiate between different types of reactivity. The R-3 matrix and lime reactivity tests were found to be the most effective methods, but slow-reacting materials may show low reactivity in both tests. Extending the test duration can better represent material reactivity. Additionally, SCMs with higher alumina content perform better in the R-3 tests, but this creates a reactivity bias when compared to SCMs with lower alumina content. Measuring the calcium hydroxide content of R-3 pastes can differentiate between pozzolanic and hydraulic materials.

CEMENT AND CONCRETE RESEARCH (2022)

Article Construction & Building Technology

Strength activity index and bulk resistivity index modifications that differentiate inert and reactive materials

Ying Wang et al.

Summary: The ASTM C311 strength activity index test may not successfully distinguish inert and reactive materials, but improvements in differentiation can be achieved by increasing replacement levels and temperatures. Conducting bulk resistivity tests at higher temperatures helps to differentiate inert and reactive materials.

CEMENT & CONCRETE COMPOSITES (2021)

Review Construction & Building Technology

Limestone calcined clay cement and concrete: A state-of-the-art review

Meenakshi Sharma et al.

Summary: This article reviews the latest literature on limestone calcined clay cement (LC3), discussing its background, chemistry, production, influence of raw materials and production conditions, mixture design, mechanical and durability properties, as well as economic and environmental aspects. Suggestions for further research are also provided at the end of the paper.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Screening candidate supplementary cementitious materials under standard and accelerated curing through time-series surface resistivity measurements and change-point detection

Renee T. Rios et al.

Summary: Time-series surface resistivity measurements are evaluated as an indicator of pozzolanicity in concretes with known and unknown materials, with CPD analysis providing a rigorous early determination of pozzolanicity. SR measurements at elevated curing conditions capture the onset of pozzolanic reactions, allowing a comprehensive analysis of material reactivity and determination of pozzolanicity in as quickly as two days. Limits on material composition are recommended for the determination of pozzolanic reactivity in novel or variable materials.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Unravelling chloride transport/microstructure relationships for blended-cement pastes with the mini-migration method

William Wilson et al.

Summary: A chloride mini-migration method was proposed to estimate effective diffusion coefficients and investigate mechanisms of resistance against chloride ingress in blended-cement pastes. The study found that porosity, pore connectivity parameter, and conductivity of the pore solution are key factors influencing the effective diffusion coefficient in these systems. Notably, a general correlation was established between effective diffusion coefficient and bulk conductivity across all investigated systems.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties

Franco Zunino et al.

Summary: In limestone calcined clay cements (LC3), a higher amount of hemicarboaluminate and monocarboaluminate is observed compared to other blended cements, due to the reaction of metakaolin with limestone. The formation of these carboaluminate phases mainly occurs during a third hydration peak, which is influenced by metakaolin content, sulfate addition level, and water to binder ratio. The precipitation of these carboaluminates significantly affects porosity refinement and strength development, while alumina from metakaolin can also contribute to the precipitation of ettringite in the presence of sufficient sulfate.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Yosra Briki et al.

Summary: This study investigates factors that could explain the slowing down of the metakaolin reaction in LC3 blends. It is found that the availability of portlandite and the presence of aluminium ions in the pore solution are not limiting factors. Hydrates can only precipitate in solution-filled pores, with an enhancement of metakaolin reaction obtained when larger capillaries are filled with solution. The analysis of the lower limit of water-filled pores is more challenging due to a lack of precision in determining interfacial energies.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

A numerical approach for designing composite cements with calcined clay and limestone

Sreejith Krishnan et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Mitigation of alkali-silica reaction by limestone calcined clay cement (LC3)

Quang Dieu Nguyen et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Supplementary cementitious materials: New sources, characterization, and performance insights

Maria C. G. Juenger et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

The influence of the filler effect on the sulfate requirement of blended cements

Franco Zunino et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Determination of the amount of reacted metakaolin in calcined clay blends

Francois Avet et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Investigation of the calcined kaolinite content on the hydration of Limestone Calcined Clay Cement (LC3)

Francois Avet et al.

CEMENT AND CONCRETE RESEARCH (2018)

Review Construction & Building Technology

A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures

Dehui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Admixture compatibility in metakaolin-portland-limestone cement blends

Behnaz H. Zaribaf et al.

MATERIALS AND STRUCTURES (2018)

Article Construction & Building Technology

Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport

Hamed Maraghechi et al.

MATERIALS AND STRUCTURES (2018)

Article Construction & Building Technology

Calcined clay limestone cements (LC3)

Karen Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1

Xuerun Li et al.

MATERIALS AND STRUCTURES (2018)

Article Materials Science, Ceramics

The filler effect: The influence of filler content and type on the hydration rate of tricalcium silicate

Aditya Kumar et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Construction & Building Technology

Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance

Yuvaraj Dhandapani et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Relationship between the Compressive Strength of Concrete Masonry and the Compressive Strength of Concrete Masonry Units

Ernesto S. Fortes et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Article Construction & Building Technology

Influence of limestone and anhydrite on the hydration of Portland cements

Maciej Zajac et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Materials Science, Ceramics

Understanding the Filler Effect on the Nucleation and Growth of C-S-H

E. Berodier et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Materials Science, Ceramics

The Filler Effect: The Influence of Filler Content and Surface Area on Cementitious Reaction Rates

Tandre Oey et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

Article Construction & Building Technology

Cement substitution by a combination of metakaolin and limestone

M. Antoni et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Fly ash-limestone ternary cements: effect of component fineness

Klaartje De Weerdt et al.

ADVANCES IN CEMENT RESEARCH (2011)

Article Construction & Building Technology

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

K. De Weerdt et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Supplementary cementitious materials

Barbara Lothenbach et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength

Ali Akbar Ramezanianpour et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

A virtual rapid chloride permeability test

Dale P. Bentz

CEMENT & CONCRETE COMPOSITES (2007)

Article Construction & Building Technology

Estimating the electrical conductivity of cement paste pore solutions from OH-, K+ and Na+ concentrations

KA Snyder et al.

CEMENT AND CONCRETE RESEARCH (2003)

Article Construction & Building Technology

Studies on the carboaluminate formation in limestone filler-blended cements

VL Bonavetti et al.

CEMENT AND CONCRETE RESEARCH (2001)