4.7 Article

Hygrothermal performance assessment of a bio-based building made with date palm concrete walls

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Assessment of hygrothermal performance of hemp concrete compared to conventional building materials at overall building scale

Fares Bennai et al.

Summary: This study analyzes the hygrothermal behavior of hemp concrete as an infill layer in wood-frame structures, showing its excellent insulation properties and thermal comfort, significantly reducing energy consumption and stabilizing indoor relative humidity levels.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Hygrothermal transfer modelling through a bio-based building material: Validation of a switching-linear model

Mohammed-Hichem Benzaama et al.

Summary: This research proposes a switching linear data-driven model for predicting the hygrothermal behavior in building envelopes. The model uses a discrete state and a switched detection approach for discrete-time linear switched systems, along with an additional variable with a discrete value. The study aims to fill the knowledge gap and address the limitations of data-driven models by providing a realistic explanation of the hygrothermal behavior of bio-based materials, identifying the hygroscopic mode, and estimating the process time of each phenomenon.

JOURNAL OF BUILDING ENGINEERING (2022)

Review Materials Science, Multidisciplinary

A Review on the Utilization of Date Palm Fibers as Inclusion in Concrete and Mortar

S. O. Bamaga

Summary: Natural fibers are attracting attention in the construction industry due to their eco-friendly, cost-effective, lightweight, and renewable characteristics. Date Palm Fibers (DPF), as one type of natural fiber, have potential applications in improving the properties of concrete and mortar. However, further research and experiments are needed before DPF concrete and mortar can be widely used in construction applications.

FIBERS (2022)

Article Construction & Building Technology

Relationship between hygrothermal and acoustical behavior of hemp and sunflower composites

Mohamed Said Abbas et al.

Summary: This article investigates the relationships between hygrothermal and acoustical parameters of bio-based porous materials, providing a method for indirect characterization of material properties through acoustical measurements. By estimating thermal conductivity and water vapor permeability from acoustical measurements, the study aims to accelerate the development of sustainable construction materials and better understand the complex hygrothermal behavior of such materials.

BUILDING AND ENVIRONMENT (2021)

Article Construction & Building Technology

Sensitivity analysis of transient heat and moisture transfer in a bio-based date palm concrete wall

Tarek Alioua et al.

Summary: Hygrothermal mathematical models are commonly used to study heat and moisture transfer in building materials. This paper focuses on a sensitivity analysis of Kunzel's model applied to a new bio-based material, highlighting the importance of key parameters and potential sources of errors in the model.

BUILDING AND ENVIRONMENT (2021)

Article Construction & Building Technology

Hempcrete building performance in mild and cold climates: Integrated analysis of carbon footprint, energy, and indoor thermal and moisture buffering

Yina Shang et al.

Summary: By comparing the carbon footprint and energy consumption of hempcrete and traditional wood-frame buildings, it was found that hempcrete has advantages in heat absorption and reducing cooling energy consumption, but higher heating energy consumption. Although hempcrete can reduce carbon emissions for buildings, the effects of moisture on thermal conductivity should not be ignored.

BUILDING AND ENVIRONMENT (2021)

Article Construction & Building Technology

Hygrothermal performance of a new thermal aerogel-based render under distinct climatic conditions

J. Maia et al.

Summary: The study focused on the hygrothermal performance of a new thermal aerogel-based render, finding improved thermal conductivity in dry state but significant increase in conductivity when saturated, highlighting the importance of using finishing materials to mitigate moisture risks. Significant hygrothermal risks were observed at higher latitudes, emphasizing the need for careful consideration in building envelope design.

ENERGY AND BUILDINGS (2021)

Article Environmental Sciences

Estimating Daily Dew Point Temperature Using Machine Learning Algorithms

Sultan Noman Qasem et al.

WATER (2019)

Article Construction & Building Technology

Investigation on heat and moisture transfer in bio-based building wall with consideration of the hysteresis effect

Tarek Alioua et al.

BUILDING AND ENVIRONMENT (2019)

Article Construction & Building Technology

Simultaneous hygrothermal performance assessment of an air volume and surrounding highly hygroscopic walls

Thomas Busser et al.

BUILDING AND ENVIRONMENT (2019)

Article Construction & Building Technology

Experimental and numerical investigations of thermal performance of a Hemp Lime external building insulation

Georges Costantine et al.

BUILDING AND ENVIRONMENT (2018)

Article Construction & Building Technology

Hygrothermal characterization of a new bio-based construction material: Concrete reinforced with date palm fibers

Nawal Chennouf et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Materials Science, Composites

Experimental and modeling study of effective thermal conductivity of polymer filled with date palm fibers

Manel Haddadi et al.

POLYMER COMPOSITES (2017)

Article Construction & Building Technology

Practical moisture buffering effect of three hygroscopic materials in real-world conditions

Huibo Zhang et al.

ENERGY AND BUILDINGS (2017)

Article Green & Sustainable Science & Technology

Analysis and comparison of environmental impacts and cost of bio-based house versus concrete house

Elma Krasny et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Construction & Building Technology

Thermal behavior of a straw bale building from data obtained in situ. A case in Northwestern Mexico

Ricardo Gallegos-Ortega et al.

BUILDING AND ENVIRONMENT (2017)

Article Construction & Building Technology

Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete

Bourhaneddine Haba et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Hygrothermal performance of a straw bale building: In situ and laboratory investigations

Omar Douzane et al.

JOURNAL OF BUILDING ENGINEERING (2016)

Article Construction & Building Technology

Methods to determine whole building hygrothermal performance of hemp-lime buildings

M. Barclay et al.

BUILDING AND ENVIRONMENT (2014)

Article Construction & Building Technology

Study of hygrothermal behaviour of a hemp concrete building envelope under summer conditions in France

C. Maalouf et al.

ENERGY AND BUILDINGS (2014)

Article Construction & Building Technology

Experimental investigation of new biocomposite with low cost for thermal insulation

Mourad Chikhi et al.

ENERGY AND BUILDINGS (2013)

Article Construction & Building Technology

Economic, ecological and thermo-hygric optimization of a vapor-open envelope for subtropical climates

Y. Goto et al.

ENERGY AND BUILDINGS (2012)

Article Construction & Building Technology

Experimental wooden frame house for the validation of whole building heat and moisture transfer numerical models

Amandine Piot et al.

ENERGY AND BUILDINGS (2011)

Article Construction & Building Technology

On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model

M. Steeman et al.

BUILDING AND ENVIRONMENT (2010)

Article Construction & Building Technology

Transient hygrothermal behaviour of a hemp concrete building envelope

A. D. Tran Le et al.

ENERGY AND BUILDINGS (2010)

Article Construction & Building Technology

Simulation of coupled heat and moisture transfer in air-conditioned buildings

Menghao Qin et al.

AUTOMATION IN CONSTRUCTION (2009)

Article Construction & Building Technology

Combined Heat, Air and Moisture (HAM) Transfer Model for Porous Building Materials

Gerson Henrique Dos Santos et al.

Journal of Building Physics (2009)

Article Construction & Building Technology

Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact

Olalekan F. Osanyintola et al.

ENERGY AND BUILDINGS (2006)