Related references
Note: Only part of the references are listed.Regenerative matching axial vascularisation of absorbable 3D-printed scaffold for large bone defects: A first in human series
George Castrisos et al.
JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2022)
Effects of Powder Vibration and Time Consolidation on Soft and Hard Wheat Flour Properties
Yumeng Zhao et al.
KONA POWDER AND PARTICLE JOURNAL (2021)
Evaluating Directional Dependency of Selective Laser Sintered Patient Specific Biodegradable Devices to Improve Predictive Modeling and Design Verification
Harsha Ramaraju et al.
ANNALS OF BIOMEDICAL ENGINEERING (2021)
On the use of a powder rheometer to probe defluidization of cohesive particles
Ipsita Mishra et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Cohesivity assessment of semi-crystalline and crystalline powders using a Warren Springs cohesion tester
Camila G. Jange et al.
POWDER TECHNOLOGY (2020)
Binder-Jet 3D Printing of Indomethacin-laden Pharmaceutical Dosage Forms
Shing-Yun Chang et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Effect of powder recycling on anisotropic tensile properties of selective laser sintered PA2200 polyamide
Bibo Yao et al.
EUROPEAN POLYMER JOURNAL (2020)
3D-printed, externally-implanted, bioresorbable airway splints for severe tracheobronchomalacia
Andrea S. Les et al.
LARYNGOSCOPE (2019)
Morphology, Crystallinity, and Molecular Weight of Poly(epsilon-caprolactone)/Graphene Oxide Hybrids
Isabel Castilla-Cortazar et al.
POLYMERS (2019)
Controlling polymer properties through the shape of the molecular-weight distribution
Dillon T. Gentekos et al.
NATURE REVIEWS MATERIALS (2019)
Laryngomalacia, Tracheomalacia and Bronchomalacia
Erik B. Hysinger
CURRENT PROBLEMS IN PEDIATRIC AND ADOLESCENT HEALTH CARE (2018)
Regulating 3D-printed medical products
Laura M. Ricles et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization
Shangqin Yuan et al.
MATERIALS & DESIGN (2017)
Computational modeling of airway instability and collapse in tracheomalacia
Scott J. Hollister et al.
RESPIRATORY RESEARCH (2017)
Use of ultra-high molecular weight polycaprolactone scaffolds for ACL reconstruction
Natalie L. Leong et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2016)
Characterization of polyamide powders for determination of laser sintering processability
Leander Verbelen et al.
EUROPEAN POLYMER JOURNAL (2016)
Integrating Image-Based Design and 3D Biomaterial Printing To Create Patient Specific Devices within a Design Control Framework for Clinical Translation
Scott J. Hollister et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Integrating Image-Based Design and 3D Biomaterial Printing To Create Patient Specific Devices within a Design Control Framework for Clinical Translation
Scott J. Hollister et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Effect of powder size and shape on the SLS processability and mechanical properties of a TPU elastomer
Sasan Dadbakhsh et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices
Robert J. Morrison et al.
CTS-CLINICAL AND TRANSLATIONAL SCIENCE (2015)
The Application of Powder Rheology in Additive Manufacturing
Jamie Clayton et al.
JOM (2015)
An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
Stefan Ziegelmeier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Assessing polymer powder flow for the application of laser sintering
Michael Van den Eynde et al.
POWDER TECHNOLOGY (2015)
Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients
Robert J. Morrison et al.
SCIENCE TRANSLATIONAL MEDICINE (2015)
Mechanical properties of suture materials in general and cutaneous surgery
Steven E. Naleway et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Scott J. Hollister et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling
Heather Doyle et al.
ANNALS OF BIOMEDICAL ENGINEERING (2014)
Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
S. Berretta et al.
EUROPEAN POLYMER JOURNAL (2014)
Towards the understanding of the molecular weight dependence of essential work of fracture in semi-crystalline polymers: A study on poly(ε-caprolactone)
F. Tuba et al.
EXPRESS POLYMER LETTERS (2014)
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
David A. Zopf et al.
NEW ENGLAND JOURNAL OF MEDICINE (2013)
Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone-hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering
Shaun Eshraghi et al.
ACTA BIOMATERIALIA (2012)
FEBio: Finite Elements for Biomechanics
Steve A. Maas et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Laser sintering of polyamides and other polymers
R. D. Goodridge et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Determination of the elastic modulus of ascending thoracic aortic aneurysm at different ranges of pressure using uniaxial tensile testing
Khalil Khanafer et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2011)
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
Shaun Eshraghi et al.
ACTA BIOMATERIALIA (2010)
Molecular Weight Dependence of the Thermal Degradation of Poly(ε-caprolactone): A Thermogravimetric Differential Thermal Fourier Transform Infrared Spectroscopy Study
Miriam Unger et al.
APPLIED SPECTROSCOPY (2010)
Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo
Christopher X. F. Lam et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Flowability and handling characteristics of bulk solids and powders - a review with implications for DDGS
V. Ganesan et al.
BIOSYSTEMS ENGINEERING (2008)
Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycaprolactone bone tissue engineering scaffolds
Brock Partee et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2006)
The in vivo degradation, absorption and excretion of PCL-based implant
HF Sun et al.
BIOMATERIALS (2006)
FTIR study of polycaprolactone chain organization at interfaces
T Elzein et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2004)
Share Paper
