Mechanical behavior of ion-irradiated ODS RAF steels strengthened with different types of refractory oxides

One of the most promising candidates for constructing IV generation nuclear reactors is Oxide Dispersed Strengthening (ODS) Reduced Activation Ferritic (RAF) steel. It is known that introducing refractory oxides to the ferritic matrix makes it possible to obtain a brand-new kind of materials with an excellent set of properties. In the present work, the authors focused on verifying materials' structural and mechanical properties strengthened by three different types of refractory oxides submitted to ion-irradiation. Three materials with an elemental chemical composition of 12 %Cr, 2 %W, 0.3 %Ti, and strengthened with 0.3% Y2O3 or Al2O3 or ZrO2 were produced by mechanical alloying and subsequently consolidated by Spark Plasma Sintering technique. Manu-factured materials have been submitted to high energy (500 keV) Ar-ion irradiation at room temperature with three fluences (up to 5x1015 ions/cm2). This procedure allowed to generate a thin, strongly damaged zone with approximate thickness of 230 nm. SEM/EBSD and TEM bservations, Grazing Incidence X-ray Diffraction analysis, and nanoindentation tests have been included in examination of modified layers. Implementation of these techniques allowed to reveal alteration of structural and mechanical features between unmodified material and radiation-affected layer. Obtained results showed a strong correlation between the strengthening oxide and materials' microstructural and mechanical behavior under radiation damage. It has been proved that below 1x1015 ions/cm2 mechanical properties in the modified layer of all materials are very similar. Reported behavior may be related to the efficient annealing of the radiation defect process. Above this limit, significant differences between the materials are visible. It is believed that described phenomenon is directly related to the presence of the structural features and their capacity to act as defect sinks. Consequently, type of dominant mechanisms occurring in modified layer is proposed.

Automated summary

In this study, the authors conducted ion irradiation experiments to verify the structural and mechanical properties of materials strengthened by three different types of refractory oxides. The results showed a strong correlation between the strengthening oxide and the materials' microstructural and mechanical behavior under radiation damage. At low fluences, the mechanical properties in the modified layer of all materials were similar, while at high fluences, significant differences between the materials were observed.