Journal
APPLIED SURFACE SCIENCE
Volume 595, Issue -, Pages -Publisher
ELSEVIER
DOI: 10.1016/j.apsusc.2022.153462
Keywords
Plasma etching; High aspect ratio mask; Ion tilting; Sheath; Etch mechanism
Categories
Funding
- Material Innovation program of National Research Foundation of Korea (NRF) - Ministry of Science and ICT [1711153942/2020M3H4A3106004]
- R&D Convergence Program of National Research Council of Science& Technology (NST) of the Republic of Korea [CRC-20-01-NFRI]
- Korea Research Institute of Standard and Science (KRISS)
Ask authors/readers for more resources
In this study, a method was developed to evaluate the plasma etching result in high-aspect-ratio trenches with ion tilting. The natural sheath curvature at the wafer edge was utilized for the evaluation. It was found that ion tilt had a significant impact on etch characteristics, including etch-stop, asymmetric and vertical etching, depending on the arrangement, location, and aspect ratio of the trench. The relationship between the electric field angle and the critical angle for ions reaching the trench bottom was analyzed to understand the etching mechanism.
In this study, we developed a method to qualify the plasma etching result in high-aspect-ratio trench with ion tilting using the natural sheath curvature at the wafer edge. Etching was performed using a patterned wafer with trenches composed of an amorphous carbon mask/SiO2/Si in a radio-frequency-biased inductively coupled plasma with an Ar/C4F6 mixture. It is revealed that even a slight ion tilt (1-2) induces dramatic changes in etch characteristics, such as etch-stop, asymmetric and vertical etching, which strongly depend on the arrangement, location, and aspect ratio of the trench. These phenomena were analyzed using the relationship between the electric field angle (theta(E)) at the sheath curvature and the critical angle (theta(c)) for ions reaching the trench bottom. It was confirmed that: i) bottom etch stops when OE > theta(c), ii) asymmetric etching occurs when theta(E) < theta(c), and iii) vertical etching occurs when theta(E) approximate to 0 degrees. This study provides a new concept for quantifying the etching performance at the wafer edge, as well as the etching mechanism of high-aspect-ratio trench in the situation of ion tilting, which is a central issue in current and next-generation etch processes.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available