☆ 4.7 Article

Alkali metals modified porous carbon for enhanced methanol and acetone selective adsorption: A theoretical study

APPLIED SURFACE SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Metal heteroatom (Mg, Cu and Co) and porous carbon co-doped MIL-101 composites with superior acetone capture capacity

Ke Zhou et al.

Summary: The study developed a metal-organic framework derived adsorbent with improved acetone adsorption performance. The optimized 20%Mg@MIL-101/PC composite showed enhanced surface area, pore volume, and active adsorption sites for acetone, achieving a maximum adsorption capacity of 1309 mg g(-1) under the test conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Agricultural Engineering

In-situ activated ultramicroporous carbon materials derived from waste biomass for CO2 capture and benzene adsorption

Xiancheng Ma et al.

Summary: This study proposes a novel preparation strategy of porous carbons based on tobacco stem, which exhibits excellent CO2 adsorption and selectivity, as well as high benzene adsorption capacities. Experimental and molecular simulation results show that the pore width affects the adsorption and separation ability of CO2, and oxygen and nitrogen atoms can enhance the electronegativity of the carbon framework and provide more active sites for CO2.

BIOMASS & BIOENERGY (2022)

Add to Collection

Article Engineering, Environmental

Experimental and molecular perspective on VOCs adsorption and separation: Study of the surface heterogeneity and oxygen functionalizing

Baogen Liu et al.

Summary: This study reveals the influence of oxygen doping on the surface heterogeneity and adsorption performance of volatile organic compounds (VOCs) through adsorption experiments and theoretical calculations. The results show that oxygen doping can significantly change the charge distribution on the carbon surface and enhance the adsorption capacity of methanol and acetone. The study also investigates the synergistic effect of oxygen-containing functional groups and finds no obvious synergistic effect.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Effective CO2 adsorption at low pressure over nitrogen-enriched porous carbons, derived from melamine-loaded polyaniline

Jong Min Park et al.

Summary: Porous carbons derived from melamine/PANI mixture pyrolyzed at low temperatures showed better performance in CO2 adsorption, particularly MPC-550 at 550°C. The high N content and narrow pores of MPC-550 led to superior selectivity and adsorption capacity compared to PC-550.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Environmental Sciences

Photocatalytic oxidation technology for indoor air pollutants elimination: A review

Yu-Wei Li et al.

Summary: Indoor air quality is crucial for human health, with increasing research focused on the impact of indoor air pollutants. Photocatalytic oxidation (PCO) technology has shown promise in eliminating indoor air pollutants, with potential for future development. However, challenges related to operating parameters and technological advancements need to be addressed for further progress in PCO technology.

CHEMOSPHERE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of functional groups and pore sizes in porous carbon for methanol acetone adsorptive separation based on molecular simulation

Lingyun Yu et al.

Summary: The research found that AC-Pyridinic had the highest adsorption capacity and selectivity for methanol-acetone separation, with 3.5 nm and 3.0 nm pores being optimal for methanol and acetone adsorption respectively. Hydrogen bonding and electrostatic interactions were crucial factors in the adsorption process.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Heteroatom-Doped Nanoporous Carbons for Ethanol/Benzene Separation: Emphasizing the Role of Molecular Clustering Effects

Yang Guo et al.

Summary: The study investigates the adsorption and separation potentials of surface-functionalized nanoporous carbons for ethanol and benzene. Surface modification enhances ethanol uptake due to electrostatic affinity, but does not significantly impact benzene adsorption. NPC/NB shows the highest ethanol/benzene selectivity and NPC/NB and NPC/N have better ethanol/benzene separation performance compared to NPC-NH2 and NPC-OH.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Engineering, Chemical

Trimethylchlorosilane modified activated carbon for the adsorption of VOCs at high humidity

Zhirui Li et al.

Summary: The hydrophobic modification of activated carbon using TEOS and TMCS can enhance the selectivity of VOCs and improve adsorption performance at high humidity, resulting in better toluene adsorption capacity and increased water contact angle.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Review Polymer Science

The prospect of synthesis of PES/PEG blend membranes using blend NMP/DMF for CO2/N2 separation

Fadel Abdul Hadi Juber et al.

Summary: Polymeric membranes, particularly those made from a blend of glassy and rubbery polymers like PES and PEG, offer a promising solution to enhance gas separation performance by minimizing the trade-off between selectivity and permeability. The use of solvents like NMP and DMF in membrane fabrication processes can further improve the morphology and separation properties of such polymer blends, making them a major prospect for CO2/N-2 gas separation.

JOURNAL OF POLYMER RESEARCH (2021)

Add to Collection

Article Engineering, Chemical

Biomass-based hierarchical porous carbon with ultrahigh surface area for super-efficient adsorption and separation of acetone and methanol

Xiancheng Ma et al.

Summary: This study developed a new method for synthesizing biomass-based hierarchical porous carbons with high surface area and adsorption capacity for acetone and methanol. The adsorption amount at high pressure is mainly determined by the total pore volume, while at low pressure, oxygen groups provide adsorption sites. Additionally, narrow micropores determine the acetone/methanol selectivity, with no effect from oxygen groups.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Recent Advances on MOF Derivatives for Non-Noble Metal Oxygen Electrocatalysts in Zinc-Air Batteries

Yuting Zhu et al.

Summary: MOF-derived non-noble metal-oxygen electrocatalysts play a crucial role in ZABs, and their performance is influenced by material structure. Research in this field mainly focuses on oxygen reduction and oxygen evolution reactions, with evolving catalyst design strategies aiming to enhance performance and address challenges.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Graphene pillared with hybrid fullerene and nanotube as a novel 3D framework for hydrogen storage: A DFT and GCMC study

Lan Bi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Activated Porous Carbon with an Ultrahigh Surface Area Derived from Waste Biomass for Acetone Adsorption, CO2 Capture, and Light Hydrocarbon Separation

Xiancheng Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design

Mohammad Yaser Masoomi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Environmental Sciences

Performance evaluation of activated carbon with different pore sizes and functional groups for VOC adsorption by molecular simulation

Yaxiong An et al.

CHEMOSPHERE (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Investigation of pore size effects on adsorption behavior of shale gas

Guohui Chen et al.

MARINE AND PETROLEUM GEOLOGY (2019)

Add to Collection

Article Energy & Fuels

Doping of alkali metals in carbon frameworks for enhancing CO2 capture: A theoretical study

Xiancheng Ma et al.

FUEL (2019)

Add to Collection

Article Engineering, Environmental

Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions

Marziye Shafiei et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Applied

The influence of the functional group on activated carbon for, acetone adsorption property by molecular simulation study

Xiaoyi Liang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Porous carbon materials based on biomass for acetone adsorption: Effect of surface chemistry and porous structure

Xiancheng Ma et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Review Engineering, Environmental

Adsorption of VOCs onto engineered carbon materials: A review

Xueyang Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Superior Selective CO2 Adsorption of C3N Pores: GCMC and DFT Simulations

Xiaofang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Sulfur Doping and Humidity on CO2 Capture by Graphite Split Pore: A Theoretical Study

Xiaofang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Engineering, Chemical

Adsorption of volatile organic vapors by activated carbon derived from rice husk under various humidity conditions and its statistical evaluation by linear solvation energy relationships

Mei-syue Li et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

Add to Collection

Article Engineering, Environmental

Adsorption of acetone and isopropanol on organic acid modified activated carbons

Lin Tang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Adsorptive Separation of Methanol Acetone on lsostructural Series of Metal-Organic Frameworks M-BTC (M = Ti, Fe, Cu, Co, Ru, Mo): A Computational Study of Adsorption Mechanisms and Metal-Substitution Impacts

Ying Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Multidisciplinary Sciences

Rational design of crystalline supermicroporous covalent organic frameworks with triangular topologies

Sasanka Dalapati et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A LiFSI-LiTFSI binary-salt electrolyte to achieve high capacity and cycle stability for a Li-S battery

J. J. Hu et al.

CHEMICAL COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

Feasibility of occurrence of different types of protonated base pairs in RNA: a quantum chemical study

Antarip Halder et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Biochemistry & Molecular Biology

Poly(ethylene glycol) Conjugation Stabilizes the Secondary Structure of α-Helices by Reducing Peptide Solvent Accessible Surface Area

Elham Hamed et al.

BIOMACROMOLECULES (2013)

Add to Collection

Article Chemistry, Inorganic & Nuclear

An alternative picture of alkali-metal-mediated metallation: cleave and capture chemistry

Robert E. Mulvey

DALTON TRANSACTIONS (2013)

Add to Collection

Article Chemistry, Physical

Computer simulation of liquid-vapor coexistence of confined quantum fluids

Victor M. Trejos et al.

JOURNAL OF CHEMICAL PHYSICS (2013)

Add to Collection

Review Environmental Sciences

Enhanced removal of nitrate from water using surface modification of adsorbents - A review

Paripurnanda Loganathan et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)

Add to Collection

Article Energy & Fuels

Molecular simulation of CO2 adsorption in micro- and mesoporous carbons with surface heterogeneity

Yangyang Liu et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2012)

Add to Collection

Article Chemistry, Physical

Detailed insight into the hydrogen bonding interactions in acetone-methanol mixtures. A molecular dynamics simulation and Voronoi polyhedra analysis study

Abdenacer Idrissi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Add to Collection

Article Environmental Sciences

Gaseous VOCs rapidly modify particulate matter and its biological effects - Part 1: Simple VOCs and model PM

S. Ebersviller et al.

ATMOSPHERIC CHEMISTRY AND PHYSICS (2012)

Add to Collection

Article Chemistry, Physical

Structure, bonding and reactions within protonated acetone-methanol cluster ions

Chi-Tung Chiang et al.

CHEMICAL PHYSICS LETTERS (2011)

Add to Collection

Article Chemistry, Physical

A comparative Molecular Dynamics study of water-methanol and acetone-methanol mixtures

Aurehen Perera et al.

JOURNAL OF MOLECULAR LIQUIDS (2011)

Add to Collection

Article Chemistry, Physical

Bridging homogeneous and heterogeneous catalysis with MOFs Click reactions with Cu-MOF catalysts

I. Luz et al.

JOURNAL OF CATALYSIS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene oxidation: Thickness-dependent etching and strong chemical doping

Li Liu et al.

NANO LETTERS (2008)

Add to Collection

Article Chemistry, Applied

Investigation of CO2 adsorption in Faujasite systems:: Grand canonical Monte Carlo and molecule dynamics simulations based on a new derived Na+-CO2

D. F. Plant et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrogen adsorption in metal-organic frameworks:: Cu-MOFs and Zn-MOFs compared

B Panella et al.

ADVANCED FUNCTIONAL MATERIALS (2006)

Add to Collection

Article Thermodynamics

Performance improvement of adsorption cooling by heat and mass recovery operation

RZ Wang

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.