☆ 4.5 Article

Transmission optimized LWIR metalens

APPLIED OPTICS (2022)

Related references

Note: Only part of the references are listed.

Article Optics

Design and fabrication of monolithically integrated metalens for higher effective fill factor in long-wave infrared detectors

Huwang Hou et al.

Summary: This study integrates a polarization-independent, wide-band focusing metalens into the imaging element of the long-wave infrared detector, significantly improving the effective fill factor and detection sensitivity, further enhancing the utilization efficiency of infrared imaging technology.

OPTICS AND LASERS IN ENGINEERING (2022)

Add to Collection

Article Optics

All-dielectric orthogonal doublet cylindrical metalens in long-wave infrared regions

Xiaoyan Shi et al.

Summary: Metalens have been introduced to address the drawbacks of traditional lenses and optical systems, such as large volume and complicated assembly. A converging cylindrical metalens (CML) and an orthogonal doublet cylindrical metalens (ODCM) were designed and demonstrated for focusing effect. The performance of ODCM is comparable to that of a traditional circular metalens within a certain size range.

OPTICS EXPRESS (2021)

Add to Collection

Article Optics

Hybrid metasurfaces for simultaneous focusing and filtering

Mansoor A. Sultan et al.

Summary: This work presents the design and fabrication of polymeric, structural optical filters that simultaneously focus light, representing a novel design at the boundary between diffractive optics and metasurfaces. Filters for visible and near-infrared wavelengths were designed using finite-difference time-domain (FDTD) simulations. Prototype filters fabricated using two-photon lithography show excellent agreement between experimental measurements and simulations.

OPTICS LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Extreme-Angle Silicon Infrared Optics Enabled by Streamlined Surfaces

Fei Zhang et al.

Summary: In this study, a novel infrared optical system design based on catenary optics and isophase streamline optimization was proposed, leading to high-efficiency, wide-angle, and broadband performance. The breakthrough technology achieved near 100% diffraction efficiency in ultrawide spectral and angular ranges, enabling wide-angle diffraction-limited imaging and laser beam steering with a field of view up to 178 degrees. This methodology is scalable to the entire optical band and various materials, offering compact infrared systems for surveillance, unmanned vehicles, medical science, and more.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Reconfigurable all-dielectric metalens with diffraction-limited performance

Mikhail Y. Shalaginov et al.

Summary: This study introduces an active metasurface platform with all-dielectric, low-loss architecture for phase tuning in the full 2 range and diffraction-limited performance. A new design principle enables binary switching between arbitrary phase profiles for metasurfaces, along with a figure-of-merit tailored for reconfigurable meta-optics. The high-performance varifocal metalens with a record large switching contrast ratio and aberration-free, multi-depth imaging represents a key experimental demonstration of non-mechanical tunable metalens with diffraction-limited performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Broadband Achromatic Metasurfaces for Longwave Infrared Applications

Naitao Song et al.

Summary: The study analyzed the chromatic dispersion properties of metasurfaces and presented a method for correcting chromatic aberrations, demonstrating two broadband achromatic metasurfaces in the LWIR. This work represents a substantial advance in the field and brings it a step closer to practical applications.

NANOMATERIALS (2021)

Add to Collection

Article Optics

Imaging from the visible to the longwave infrared wavelengths via an inverse-designed flat lens

Monjurul Meem et al.

Summary: By allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic aberrations over an extremely large bandwidth using a single diffractive surface, leading to thinner, lighter, and simpler imaging systems with improved performance.

OPTICS EXPRESS (2021)

Add to Collection

Article Optics

Rotationally tunable varifocal 3D metalens

Fatih Balli et al.

Summary: Varifocal optics have various applications in imaging systems. In this work, a 3D doublet metalens with a tunable focal length is designed and fabricated, allowing for phase control of light through mutual rotation of singlet structures to produce different wavefronts converting input plane waves into spherical wavefronts whose focal length depends on rotation. The design holds promise for applications such as zoom lenses, microscopy, and augmented reality.

OPTICS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Long wavelength infrared imaging under ambient thermal radiation via an all-silicon metalens

Luocheng Huang et al.

Summary: Traditional bulky refractive optics are a barrier to further miniaturization of imaging systems, while meta-optics have attracted great interest as a replacement for refractive optics in the visible wavelength range. This study extends meta-optics to the long-wave infrared regime and demonstrates imaging under ambient thermal emission, showing that the chromatic nature of the metalenses does not affect ambient light imaging.

OPTICAL MATERIALS EXPRESS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Scalable Nanoimprint Lithography Process for Manufacturing Visible Metasurfaces Composed of High Aspect Ratio TiO2 Meta-Atoms

Vincent J. Einck et al.

Summary: The study presents a one-step additive manufacturing process for fabricating metalenses using nanoimprint lithography and a titanium dioxide nanocrystal-based imprint material. The metalenses produced exhibit a refractive index of 1.9 and show high numerical apertures and focusing efficiencies. The success of large area replication of metalenses using this process was also demonstrated.

ACS PHOTONICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

An ultrabroadband 3D achromatic metalens

Fatih Balli et al.

Summary: The research team designed and fabricated ultra-broadband achromatic metalenses operating from visible into shortwave infrared wavelengths. The hybrid 3D architecture allowed realization in low refractive index materials, with prototyping done using two-photon lithography and mass production using molding. The experimental results showed excellent performance of the metalenses, demonstrating the feasibility of using low-refractive index materials and two-photon lithography for metalenses operating at visible wavelengths.

NANOPHOTONICS (2021)

Add to Collection

Article Multidisciplinary Sciences

A hybrid achromatic metalens

F. Balli et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dielectric metalenses at long-wave infrared wavelengths: Multiplexing and spectroscope

Feng Tang et al.

RESULTS IN PHYSICS (2020)

Add to Collection

Article Physics, Applied

Nanohole-based phase gradient metasurfaces for light manipulation

Nazmi Yilmaz et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)

Add to Collection

Article Optics

Polarization-independent infrared micro-lens array based on all-silicon metasurfaces

Mingze Liu et al.

OPTICS EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Ultra-broad band antireflection coating at mid wave infrared for high efficient germanium optics

Adem Yenisoy et al.

OPTICAL MATERIALS EXPRESS (2019)

Add to Collection

Article Physics, Applied

Analysis of Field-Effect Passivation in Textured and Undiffused Silicon Surfaces

Deniz Turkay et al.

PHYSICAL REVIEW APPLIED (2019)

Add to Collection

Article Multidisciplinary Sciences

Broadband lightweight flat lenses for long-wave infrared imaging

Monjurul Meem et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Metalens with a Near-Unity Numerical Aperture

Ramon Paniagua-Dominguez et al.

NANO LETTERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

A broadband achromatic metalens in the visible

Shuming Wang et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Structural absorption by barbule microstructures of super black bird of paradise feathers

Dakota E. McCoy et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Physics, Applied

A high numerical aperture, polarization-insensitive metalens for long-wavelength infrared imaging

Qingbin Fan et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Optics

Inverse design of large-area metasurfaces

Raphael Pestourie et al.

OPTICS EXPRESS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Metasurface holography: from fundamentals to applications

Lingling Huang et al.

NANOPHOTONICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High-Efficiency All-Dielectric Metalenses for Mid-Infrared Imaging

Haijie Zuo et al.

ADVANCED OPTICAL MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging

Mohammadreza Khorasaninejad et al.

SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

Miniature optical planar camera based on a wide-angle metasurface doublet corrected for monochromatic aberrations

Amir Arbabi et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Empirical Comparison of Random and Periodic Surface Light-Trapping Structures for Ultrathin Silicon Photovoltaics

Matthew S. Branham et al.

ADVANCED OPTICAL MATERIALS (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.