☆ 4.7 Article

A CFD modeling of CPU cooling by eco-friendly nanofluid and fin heat sink passive cooling techniques

ADVANCED POWDER TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Effects of central cut on performance intensification of counter-flow integral heat sinks

M. Khoshvaght-Aliabadi et al.

Summary: The study shows that increasing the length of the central cut can improve thermal performance, but an excessively long central cut leads to a decline in heat transfer enhancement. The optimal length of the central cut is 15 mm, which maximizes the heat transfer enhancement factor and achieves the best temperature uniformity on the junction surface.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2022)

Add to Collection

Article Thermodynamics

Comparison of Co- and counter-current modes of operation for wavy minichannel heat sinks (WMHSs)

M. Khoshvaght-Aliabadi et al.

Summary: This study compares the applications of co- and counter-current modes in wavy minichannel heat sinks, finding an increasing dependence of thermal and hydraulic characteristics on Reynolds number with increasing wave-amplitude and decreasing wave-length. The use of counter-current mode significantly improves temperature uniformity at the same pumping power.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Temperature nonuniformity management in heat sinks through applying counter-flow design complex minichannels

Morteza Khoshvaght-Aliabadi et al.

Summary: Thanks to the electronic industrial revolution, miniaturization has been extended to hardware components. In this study, novel minichannels were examined to improve the temperature uniformity of electronic components. The results showed that these minichannels can decrease the base temperature and increase the temperature uniformity, as well as enhance the overall hydrothermal performance.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Experimental and numerical investigation on thermal and hydraulic performance of novel serpentine minichannel heat sink for liquid CPU cooling

M. Gorzin et al.

Summary: A novel serpentine design for minichannel heat sink is investigated to enhance thermal performance. The results show that the proposed design decreases baseplate temperature by 11.2% and increases Nusselt number by 4.2 times.

ENERGY REPORTS (2022)

Add to Collection

Article Thermodynamics

Thermal and energy management prospects of γ-AlOOH hybrid nanofluids for the application of sustainable heat exchanger systems

S. Anitha et al.

Summary: This study focuses on the thermal performance of double-tube heat exchangers with two types of hybrid nanofluids, showing that TiO2-γ-AlOOH/water leads to a 50% improvement in heat transfer rate compared to TiO2-γ-AlOOH/ethylene glycol. However, the latter has a higher pumping power by 30%. Further analysis on the energy consumption of heat exchangers with ethylene glycol-based coolants on an industrial scale is needed for future research.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Thermodynamics

Influence of base fluid, temperature, and concentration on the thermophysical properties of hybrid nanofluids of alumina-ferrofluid: experimental data, modeling through enhanced ANN, ANFIS, and curve fitting

S. O. Giwa et al.

Summary: The study investigated the suspension of hybrid nanoparticles in conventional fluids to improve the thermophysical properties of nanofluids, specifically focusing on the trio influence of volume concentration, base fluid, and temperature on the electrical conductivity and viscosity of hybrid alumina-ferrofluids. The results showed that an increase in volume concentration enhanced the viscosity and electrical conductivity of the hybrid alumina-ferrofluids, while a rise in temperature enhanced their electrical conductivity but detracted the viscosity. Additionally, DW-based hybrid alumina-ferrofluid exhibited lower viscosity and higher electrical conductivity compared to the EG-DW-based counterpart.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Cooling performance of an impinging synthetic jet in a microchannel with nanofluids: An Eulerian approach

G. E. Lau et al.

Summary: Numerical investigations were conducted on the heat transfer enhancement in a three-dimensional micro-channel using Al2O3-water, CuO-water and TiO2-water nanofluids with a single synthetic jet. Different types of nanoparticles at various concentrations were examined to assess their effects on thermal performance. The study found that the overall thermal performance was greatly influenced by the thermal conductivity and dynamic viscosity of the nanofluids, and the convective cooling effectiveness of the synthetic jet decreased with higher nanofluid viscosity, although this could be offset by an increase in thermal conductivity depending on the Peclet number.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Graphene-silver alloyed quantum dots nanofluid: Synthesis and application in the cooling of a simulated electronic system

Vishnuprasad Selvaraj et al.

Summary: In this study, graphene-silver alloyed quantum dots were synthesized using an In-situ hydrothermal method to create nanofluid suspensions for cooling electronic systems. The nanofluid showed enhanced thermal conductivity and heat transfer capabilities, making it a promising coolant for heat-generating electronic systems.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Profit and performance boost of straight, wavy, and combined minichannel heat sinks by counter-current pattern

Morteza Khoshvaght-Aliabadi et al.

Summary: A 3D numerical simulation was conducted to investigate the thermal and hydraulic characteristics of straight, wavy, and combined minichannel heat sinks with both co- and counter-current patterns. The results showed that replacing the co-current pattern with the counter-current pattern can significantly reduce the temperature difference at the base of MCHSs, leading to more uniform temperature distribution. Furthermore, all enhanced MCHSs demonstrated better overall performances compared to the straight one.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Thermodynamics

Entropy generation of graphene-platinum hybrid nanofluid flow through a wavy cylindrical microchannel solar receiver by using neural networks

Raouf Khosravi et al.

Summary: This study analyzes the performance of graphene-platinum/water hybrid nanofluid flow in a cylindrical microchannel heat sink using the second law of thermodynamics. Increasing factors such as wave amplitude, nanoparticle concentration, and Reynolds number leads to a decrease in thermal entropy generation rate while frictional entropy increases. The Bejan number was found to be greater than 0.98 in all cases, indicating that irreversibility mainly results from thermal entropy generation. Evidently, increasing input variables reduces the thermal entropy generation rate. Additionally, an artificial neural network model was developed to predict entropy generation based on factors like wave amplitude, nanofluid concentration, and Reynolds number.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Mathematics

Combination Effect of Baffle Arrangement and Hybrid Nanofluid on Thermal Performance of a Shell and Tube Heat Exchanger Using 3-D Homogeneous Mixture Model

Mashhour A. Alazwari et al.

Summary: The study found that adding nanoparticles to the distilled water or increasing the fluid's Reynolds number can improve the heat transfer performance in shell and tube heat exchangers, especially at a baffle angle of 135 degrees. Additionally, increasing the baffle angle resulted in more fluid blocking areas, leading to increased pressure drop and friction.

MATHEMATICS (2021)

Add to Collection

Article Thermodynamics

Multi-objective optimization of a chip-attached micro pin fin liquid cooling system

Vahideh Radmard et al.

Summary: The study investigates a new packaging technique by directly attaching micro pin fins onto a chip surface to eliminate certain thermal resistances, resulting in an optimized cooling device demonstrating excellent thermal and hydraulic performance.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Numerical simulation of the melting of a NePCM for cooling of electronic components

Hamza Faraji et al.

Summary: The numerical study investigates the melting process of a nano-enhanced phase change material in a latent heat thermal energy storage unit with Cu nanoparticles, showing that the addition of nanoparticles can lower the maximum operating temperature of the electronic component and accelerate the melting rate.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Add to Collection

Article Thermodynamics

A novel ultra-thin vapor chamber for heat dissipation in ultra-thin portable electronic devices

Guangwen Huang et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Cooling of high heat flux electronic devices using ultra-thin multiport minichannel thermosyphon

Stephen Manova et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Effect of branching level on the performance of constructal theory based Y-shaped liquid cooling heat sink

Zhihao Lu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Physics, Multidisciplinary

Develop optimal network topology of artificial neural network (AONN) to predict the hybrid nanofluids thermal conductivity according to the empirical data of Al2O3 - Cu nanoparticles dispersed in ethylene glycol

Yeping Peng et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Add to Collection

Article Thermodynamics

Submillimeter-thick loop heat pipes fabricated using two-layer copper sheets for cooling electronic applications

Takeshi Shioga et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Numerical simulation with LBM of the cooling of electronic component: Effect of the inclination angle

E. M. Berra et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Numerical study on heat transfer performance using Al2O3/water nanofluids in six circular channel heat sink for electronic chip

P. C. Mukesh Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Thermodynamics

Experimental evaluation of dynamic viscosity of ZnO-MWCNTs/engine oil hybrid nanolubricant based on changes in temperature and concentration

Marjan Goodarzi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Physics, Multidisciplinary

A novel nonlinear regression model of SVR as a substitute for ANN to predict conductivity of MWCNT-CuO/water hybrid nanofluid based on empirical data

Arash Karimipour et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

Add to Collection

Article Physics, Multidisciplinary

Evaluating the effect of temperature and concentration on the thermal conductivity of ZnO-TiO2/EG hybrid nanofluid using artificial neural network and curve fitting on experimental data

Mohammad Reza Safaei et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

Add to Collection

Article Engineering, Chemical

CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: Effect of different configurations

Mehdi Bahiraei et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Efficacy of hybrid nanofluid in a new microchannel heat sink equipped with both secondary channels and ribs

Mehdi Bahiraei et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Thermodynamics

Analysis of straight and wavy miniature heat sinks equipped with straight and wavy pin-fins

Zohreh Chamanroy et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Physics, Multidisciplinary

Estimate the shear rate & apparent viscosity of multi-phased non-Newtonian hybrid nanofluids via new developed Support Vector Machine method coupled with sensitivity analysis

Zhe Tian et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

Add to Collection

Article Thermodynamics

Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer

Rad Sadri et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Review Engineering, Multidisciplinary

A Quick Overview of Compact Air-Cooled Heat Sinks Applicable for Electronic Cooling-Recent Progress

Chi-Chuan Wang

INVENTIONS (2017)

Add to Collection

Article Thermodynamics

Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling

Jin Zhao et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Review Electrochemistry

On the performance of commercially available corrosion-resistant nickel alloys: a review

Cesar A. C. Sequeira et al.

CORROSION REVIEWS (2016)

Add to Collection

Article Thermodynamics

Effect of Al2O3-Cu/water hybrid nanofluid in heat transfer

S. Suresh et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Review of metal matrix composites with high thermal conductivity for thermal management applications

Xuan-hui Qu et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)

Add to Collection

Article Thermodynamics

Liquid cooling in the mini-rectangular fin heat sink with and without thermoelectric for CPU

Paisarn Naphon et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Numerical study of pin-fin heat sink with un-uniform fin height design

Yue-Tzu Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.