☆ 4.8 Article

Bimetallic Rechargeable Al/Zn Hybrid Aqueous Batteries Based on Al-Zn Alloys with Composite Electrolytes

ADVANCED MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Multi-type cubic ComXn (X = O, S, Se) induced by zeolitic imidazolate framework (ZIF) as cathode materials for aluminum battery

Zhanyu Li et al.

Summary: The study found that CoSe2 exhibits higher operating voltage and excellent discharge capacity as a cathode material for aluminum ion batteries, with both Co and Se elements involved in the redox reaction. After 500 cycles, CoSe2 maintains a high discharge capacity, indicating its potential as a promising cathode material for aluminum batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Aluminum-copper alloy anode materials for high-energy aqueous aluminum batteries

Qing Ran et al.

Summary: This study reports the use of aluminum-copper alloys as anode active materials in aqueous aluminum batteries, which improves the electrochemical behavior of the aluminum electrode and achieves dendrite-free aluminum deposition. Under experimental conditions, the aluminum-copper alloy electrode demonstrates low overpotential over 2000 hours, and when combined with a specific cathode material, it delivers high specific energy and cycling stability.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

An aqueous aluminum-ion electrochromic full battery with water-in-salt electrolyte for high-energy density

Zhongqiu Tong et al.

Summary: The aluminum-ion electrochromic full battery (AIEFB) overcomes challenges by optimizing electrode materials and electrolyte, demonstrating advantages in high average discharge potential, attractive energy density, high transmittance modulation, and distinct coloration during operation.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Tuning electrolyte solvation structures to enable stable aqueous Al/MnO2 battery

Yan Xu et al.

Summary: Tuning the solvation structures of Al3+ cations in concentrated aqueous electrolytes can prevent their intercalation into the MnO2 cathode, ensuring high reversibility and improving the performance of MnO2 cathode in aqueous batteries. This approach opens up new possibilities for the development of highly reversible MnO2 cathodes in multivalent metal/MnO2 batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Photo-electrochemical enhanced mechanism enables a fast-charging and high-energy aqueous Al/MnO2 battery

Xuefen Zhang et al.

Summary: In this study, a highly reversible photo-electrochemical coupling system has been demonstrated, which achieves rapid kinetics, fast charging, and enhanced rate performance through induced photoelectrons. It also enhances the discharge capacity and charge storage ability of manganese oxide as a positive electrode material for AAIBs.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Two-dimensional V2C@Se (MXene) composite cathode material for high-performance rechargeable aluminum batteries

Wenrong Lv et al.

Summary: This study successfully synthesized vanadium carbide (V2C) and its composite structure with selenium (V2C@Se), and investigated the reversible redox reaction and improved intercalation performance of [AlCl4](-) on V2C@Se. The research has the potential to inspire the development of high energy density and high stability aluminum batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries

Chunshuang Yan et al.

Summary: This study demonstrates that amorphization is an effective strategy to address critical issues in aqueous aluminum metal batteries (AMBs). By shifting the reduction potential for aluminum deposition, the amorphous aluminum (a-Al) interfacial layer facilitates stable aluminum plating and stripping, while mitigating passivation and enhancing interfacial ion transfer kinetics. The use of a noncorrosive, low-cost, and fluorine-free electrolyte further contributes to the excellent electrochemical performance of the AMBs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A sobering examination of the feasibility of aqueous aluminum batteries

Glenn R. Pastel et al.

Summary: This study provides a rigorous examination of aqueous aluminum electrolytes and reveals a dynamic solvation structure around Al3+ cations. However, practical concerns related to the corrosiveness of acidic solutions and the inadequate reductive stability of the proposed electrolytes limit the feasibility of rechargeable aqueous aluminum batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Metal-Organic Framework Structure with Fe-Co-Se (MIL-88A/Fe-Co@Se) as a Cathode for Aluminum Batteries

Gaohong Wu et al.

Summary: Rechargeable aluminum-ion batteries have garnered increasing attention due to their high theoretical energy density, safety, and affordability. However, the development of aluminum batteries has been limited by the lack of suitable cathode materials. This study successfully addressed the poor cycling stability and low specific capacity of aluminum batteries through the creation of YSNT@Se hybrids.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

A novel CuSe-Cu1.8Se heterostructure with hexahedral structure cathode material for aluminum batteries

Xiaoxiao Li et al.

Summary: A new Al battery with CuSe-Cu1.8Se heterogeneous structure was successfully designed and showed excellent electrochemical performance, with a specific capacity of 1440.4 mAh g(-1) and 607.3 mAh g(-1) at 1 A g(-1) charge and discharge, and a capacity retention of 185.8 mAh g(-1) after 200 cycles. The heterostructure demonstrated incredible flexibility and safety even after bending and shearing, indicating promising potential for future development of aluminum batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

The host hollow carbon nanospheres as cathode material for nonaqueous room-temperature Al-S batteries

Yu Zhang et al.

Summary: Porous carbon materials provide larger storage space and alleviate the sulfur shuttle effect in aluminum-sulfur batteries. The hollow carbon materials have a specific capacity of 1027 mAh g(-1) at the first cycle and achieve 378 mAh g(-1) after 28 cycles.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Realizing reversible storage of trivalent aluminum ions using VOPO4•2H2O nanosheets as cathode material in aqueous aluminum metal batteries

Qiang Pang et al.

Summary: Aqueous Al metal batteries are promising for large-scale energy storage due to their safety and cost-efficiency, but the lack of suitable cathode materials has been a major obstacle. This study successfully prepared VOPO4·2H(2)O nanosheets and optimized the electrochemical performance of a water-based VOPO4·2H(2)O/Al metal battery.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

h-MoO3/AlCl3-Urea/Al: High performance and low-cost rechargeable Al-ion battery

Paloma Almodovar et al.

Summary: A fully functional rechargeable aluminium-ion battery operating at room temperature has been developed using hexagonal molybdenum oxide as the positive electrode active material and AlCl3-Urea as the electrolyte. Through the use of various characterization techniques, it has been observed that h-MoO3 is capable of efficiently inserting and de-inserting redox active species in its crystalline structure, with enhanced capacitive properties when combined with carbon nanotubes.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Electrochemistry

Electrochemical properties of K and S doped LiMn2O4 studied by GITT and EIS

Krystian Chudzik et al.

Summary: K and S doped LiMn2O4 cathode material was synthesized through sol-gel route, with different dopant combinations studied for their effects on performance, leading to the establishment of optimal composition for high-power application.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Review Chemistry, Applied

From aqueous Zn-ion battery to Zn-MnO2 flow battery: A brief story

Tong Xue et al.

Summary: AZIB is an attractive technology due to its low cost, high safety, and eco-friendliness. Recent studies have shown significant performance enhancement through revamping of the electrochemistry and redesigning of the electrolyte and interface. The Zn-MnO2 electrolytic mechanism shows great promise for large-scale static energy storage.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

A manganese hexacyanoferrate framework with enlarged ion tunnels and two-species redox reaction for aqueous Al-ion batteries

Donghong Wang et al.

Summary: The study focused on addressing the poor rate capability and limited cycle life issues of aqueous Al-ion batteries by designing a defective manganese hexacyanoferrate (MnFe-PBA) cathode with enlarged ion transportation tunnels and activated metal sites, leading to improved rate capability and cycling stability. Furthermore, the use of nanofibrillated cellulose/polyacrylamide hydrogel electrolytes successfully prolonged the cycling life of the batteries to 200 cycles, demonstrating stable output under various deformations.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Rechargeable aqueous aluminum-FeFe(CN)6 battery with artificial interphase through deep eutectic solution

Ruifa Bai et al.

Summary: Rechargeable metal batteries based on aluminum have great potential but face challenges with surface passivation. By treating the aluminum anode with a deep eutectic solution, a stable solid interface interphase can be constructed to improve battery performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Solid Electrolyte Interphase Engineering for Aqueous Aluminum Metal Batteries: A Critical Evaluation

Tony Dong et al.

Summary: The study reveals that current AAMBs fail to establish stable and effective SEI, resulting in poor voltage and cyclabilities, with hydrogen evolution reaction remaining the main cathodic reaction.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Suppressing passivation layer of Al anode in aqueous electrolytes by complexation of H2PO4- to Al3+ and an electrochromic Al ion battery

Haiming Lv et al.

Summary: This study presents a hybrid electrolyte based on Al(TOF)(3) and H3PO4 for aqueous aluminum ion batteries (AIBs) which exhibits superior stability and a record-breaking lifespan of 3850 cycles. The Al//PANI battery with this electrolyte shows high reversibility and stability during the charging/discharging process, and delivers a higher coloration efficiency of 84 cm(2) C-1 at a wavelength of 630 nm.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Liquid gallium as long cycle life and recyclable negative electrode for Al-ion batteries

Handong Jiao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Two-dimensional Ti3C2@CTAB-Se (MXene) composite cathode material for high-performance rechargeable aluminum batteries

Zhanyu Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Architecting a Stable High-Energy Aqueous Al-Ion Battery

Chunshuang Yan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Engineering, Environmental

Reduced graphene oxide (rGO) coated porous nanosphere TiO2@Se composite as cathode material for high-performance reversible Al-Se batteries

Zhanyu Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Electrochemically induced cationic defect in MnO intercalation cathode for aqueous zinc-ion battery

Chuyu Zhu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Nonaqueous Aluminum Ion Batteries: Recent Progress and Prospects

Zhengqiang Hu et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

A high-performance flexible aqueous Al ion rechargeable battery with long cycle life

Panpan Wang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

The Rechargeable Aluminum Battery: Opportunities and Challenges

Huicong Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Energy Aqueous Aluminum-Manganese Battery

Shiman He et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

A flexible aqueous Al ion rechargeable full battery

Panpan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Multidisciplinary Sciences

Electrochemically activated spinel manganese oxide for rechargeable aqueous aluminum battery

Chuan Wu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Emerging Nonaqueous Aluminum-Ion Batteries: Challenges, Status, and Perspectives

Yu Zhang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Core-Shell Structure and Interaction Mechanism of γ-MnO2 Coated Sulfur for Improved Lithium-Sulfur Batteries

Lubin Ni et al.

SMALL (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Odyssey of Multivalent Cathode Materials: Open Questions and Future Challenges

Pieremanuele Canepa et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Physical

Transition metal doped cryptomelane-type manganese oxide catalysts for ozone decomposition

Jinzhu Ma et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Overview and Future Perspectives of Aluminum Batteries

Giuseppe Antonio Elia et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

XPS study of the surface chemistry of conventional hot-dip galvanised pure Zn, galvanneal and Zn-Al alloy coatings on steel

S Feliu et al.

ACTA MATERIALIA (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.