☆ 4.8 Article

Inhibiting the Growth of 1D Intermediates in Quasi-2D Ruddlesden-Popper Perovskites

ADVANCED FUNCTIONAL MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Guanidinium-Pseudohalide Perovskite Interfaces Enable Surface Reconstruction of Colloidal Quantum Dots for Efficient and Stable Photovoltaics

Jonghee Yang et al.

Summary: This study achieves high-performance and stable CQDPVs by reconstructing the oxidized CQD surface with thiocyanate anions for better surface passivation and promoting the construction of epitaxial perovskite bridges within the CQD matrix using guanidinium cations. The photocurrents are over 30 mA cm(-2) with nearly 80% quantum efficiency at excitonic peaks, and stable operation is maintained under humid and ambient conditions, indicating interfacial recombination associated with band alignment governs both the CQDPV performance and stability.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Over 21% Efficiency Stable 2D Perovskite Solar Cells

Ming Shao et al.

Summary: This study fabricated 2D perovskite solar cells incorporating FA, MA, and FA/MA, resulting in significantly enhanced light absorption and device stability. The introduction of FA cations increased the 3D-like phase relative to 2D phases and effectively suppressed the formation of the yellow delta phase.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Intermediate Chemistry of Halide Perovskites: Origin, Evolution, and Application

Xiaofeng Huang et al.

Summary: This Perspective provides molecule-level insights into the role of Lewis base additives in solution-processed metal halide perovskites and the research progress on intermediate chemistry. The interaction between LBAs and Lewis acid species leads to the formation of different intermediate structures, which influence the transition process from intermediates to perovskites.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Quasi-Two-Dimensional Perovskite Solar Cells with Efficiency Exceeding 22%

Yalan Zhang et al.

Summary: In this study, a quasi-2D perovskite solar cell with a power conversion efficiency of over 22% was achieved by post-treatment with amphoteric imidazolium iodide. The optimal concentration of imidazolium iodide reduced trap density and enhanced charge mobility, resulting in improved phase purity and crystallinity of the device.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Chemistry, Physical

Intermediate phase engineering of halide perovskites for photovoltaics

Wanchun Xiang et al.

Summary: Metal halide perovskites are promising photovoltaic materials, and the intermediate phase during their fabrication plays a crucial role in determining the quality and performance of perovskite films. This review summarizes the research on the mechanism and applications of intermediate phase engineering (IPE) processes in various solution-processing technologies, and discusses the challenges and prospects of developing high-performance perovskite solar cells (PSCs) through IPE.

JOULE (2022)

Add to Collection

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Pseudohalide-Assisted Growth of Oriented Large Grains for High-Performance and Stable2D Perovskite Solar Cells

Weichuan Zhang et al.

Summary: This study finds that pseudohalides can promote the growth of oriented large-grained 2D perovskite films, improve their phase distribution, crystalline quality, and carrier transport, resulting in significantly improved efficiency and thermal stability of perovskite solar cells.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Thermostable and Efficient Formamidinium-Based Low-Dimensional Perovskite Solar Cells

Lei Cheng et al.

Summary: A new type of MA-free FA-based low-dimensional perovskites shows superior photovoltaic performance and thermal stability compared to MA-containing 2D perovskites.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

The 2D Halide Perovskite Rulebook: How the Spacer Influences Everything from the Structure to Optoelectronic Device Efficiency

Xiaotong Li et al.

Summary: This review provides guidelines on choosing spacers and incorporating them into crystalline materials and optoelectronic devices for two-dimensional halide perovskites. The comprehensive understanding of the effects of spacers on structure, properties, and device performance can accelerate the discovery and application of novel 2D materials in high-performance devices.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Defect Suppression in Oriented 2D Perovskite Solar Cells with Efficiency over 18% via Rerouting Crystallization Pathway

Yi Yang et al.

Summary: A new crystallization pathway (RCP) is reported to suppress defects in vertically oriented 2D perovskite films, leading to highly homogeneous and stable films with improved optoelectronic properties. By controlling the adsorption of additives on crystal planes, large grains are encouraged to form, ultimately enhancing the performance of solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

High-Quality Ruddlesden-Popper Perovskite Film Formation for High-Performance Perovskite Solar Cells

Pengyun Liu et al.

Summary: Perovskite solar cells have witnessed rapid development in the past decade, with particular attention on low-dimensional Ruddlesden-Popper (RP) perovskite-based cells due to their stability. While RP perovskite-based cells are more stable, their efficiency still lags behind 3D counterparts, highlighting the importance of improving the quality of RP perovskite films through innovative film formation processes.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Centimeter-Sized Single Crystal of a One-Dimensional Lead-Free Mixed-Cation Perovskite Ferroelectric for Highly Polarization Sensitive Photodetection

Weichuan Zhang et al.

Summary: This study presents a new ferroelectric design strategy by partially substituting organic cations to precisely design one-dimensional polarization-sensitive perovskite ferroelectric materials, offering an effective pathway for the targeted design of new functional lead-free linear dichroic anisotropic photonic ferroelectrics.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering

Yawen Huang et al.

Summary: Scientists successfully optimized the secondary crystallization process of 2D perovskite through multifunctional interface engineering, achieving efficient and stable solar cells with high conversion efficiency, which could retain high efficiency even after long-term storage under ambient conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Lingmei Kong et al.

Summary: By incorporating MeS additives to modify quasi-2D RP perovskite films, the structure is reconstructed, energy transfer is enhanced, and defect density is reduced, leading to improved light emission efficiency and device performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Perovskite intermediate phases fundamentally address the urgent stability issue

Weichuan Zhang et al.

Summary: The discovery of a key intermediate in the stability issue of halide hybrid perovskite solar cells helps elucidate the complete phase evolution and stabilization mechanism of formamidinium-based perovskite.

CHEM (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Memory Seeds Enable High Structural Phase Purity in 2D Perovskite Films for High-Efficiency Devices

Siraj Sidhik et al.

Summary: A simple and scalable phase-selective method was reported to fabricate 2D perovskite thin films with homogenous layer thickness, enabling the fabrication of efficient photovoltaic devices. The method involves dissolution of single-crystalline powders in desired solvents to produce thin films with uniform perovskite layer thicknesses. Photovoltaic devices fabricated using such films demonstrated high efficiency and stability.

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Pseudo-Halide Perovskite Solar Cells

Pei-Ying Lin et al.

Summary: Perovskite solar cells have achieved high power conversion efficiency, but the intrinsic instability of perovskite materials remains a key issue. Studies have shown that mixed-halide perovskites and other negative monovalent ions can improve stability. This review presents the evolution and applications of pseudo-halide perovskite solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Intermediate Phase-Free Process for Methylammonium Lead Iodide Thin Film for High-Efficiency Perovskite Solar Cells

Yeonghun Yun et al.

Summary: The study explores the effects of the novel aprotic Lewis-base solvent TMP on the formation of perovskite thin films and the photovoltaic properties of PSCs. PSCs based on TMP/DMF-mixed solvent exhibit higher average efficiency and smaller hysteresis compared to those based on DMSO/DMF or DMF-only solvents, attributed to the lower defect density of the TMP/DMF-derived perovskite film.

ADVANCED SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells

Xin Wu et al.

Summary: Hybrid metal-halide perovskite solar cells have gained unprecedented attention for their superior photovoltaic performance and low-cost fabrication, achieving high power conversion efficiency through understanding the structure-property relationship and carrier dynamics. The evolution of heterojunction design and multijunction structures plays crucial roles in enhancing efficiency, aiming to surpass 30% PCE in the future.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Article Energy & Fuels

Two-dimensional Ruddlesden-Popper layered perovskite solar cells based on phase-pure thin films

Chao Liang et al.

Summary: Introducing molten salt spacers can produce phase-pure quantum wells and enhance the performance of solar cells. Two-dimensional Ruddlesden-Popper layered metal-halide perovskites have better stability and optoelectronic properties compared to their three-dimensional counterparts.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Spacer Cation Tuning Enables Vertically Oriented and Graded Quasi-2D Perovskites for Efficient Solar Cells

Ze Wang et al.

Summary: Halide substitution in phenethylammonium spacer cations is an effective strategy to enhance the performance of PEA based perovskite solar cells. The substitution eliminates the n = 1 2D perovskite phase, leading to perpendicular crystal orientation and orderly distribution of different n-phases in the films. This results in significantly improved power conversion efficiency and stability in the PSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Large-Area Exfoliated Lead-Free Perovskite-Derivative Single-Crystalline Membrane for Flexible Low-Defect Photodetectors

Weichuan Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

Add to Collection

Article Multidisciplinary Sciences

Templated growth of oriented layered hybrid perovskites on 3D-like perovskites

Jifei Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Guanidinium-Assisted Surface Matrix Engineering for Highly Efficient Perovskite Quantum Dot Photovoltaics

Xufeng Ling et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Halide Double Perovskite Ferroelectrics

Weichuan Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Layered Perovskite (CH3NH3)2Pb(SCN)2I2 Single Crystals: Phase Transition and Moisture Stability

Yangyang Dang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Organic-Salt-Assisted Crystal Growth and Orientation of Quasi-2D Ruddlesden-Popper Perovskites for Solar Cells with Efficiency over 19%

Hongtao Lai et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Interface Engineering Driven Stabilization of Halide Perovskites against Moisture, Heat, and Light for Optoelectronic Applications

Aditya Narayan Singh et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Hot-Casting Large-Grain Perovskite Film for Efficient Solar Cells: Film Formation and Device Performance

Kejun Liao et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Crystallization Kinetics in 2D Perovskite Solar Cells

Youkui Xu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Heat dissipation effects on the stability of planar perovskite solar cells

Kyoungwon Choi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Energy & Fuels

Halide Versus Nonhalide Salts: The Effects of Guanidinium Salts on the Structural, Morphological, and Photovoltaic Performances of Perovskite Solar Cells

Mohammad Hayal Alotaibi et al.

SOLAR RRL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Halide Perovskites: Is It All about the Interfaces?

Philip Schulz et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Uniaxial Expansion of the 2D Ruddlesden-Popper Perovskite Family for Improved Environmental Stability

Ioannis Spanopoulos et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Unveiling the operation mechanism of layered perovskite solar cells

Yun Lin et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Improving Charge Transport via Intermediate-Controlled Crystal Growth in 2D Perovskite Solar Cells

Liguo Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells

Jinhui Tong et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Controlling Solvate Intermediate Growth for Phase-Pure Organic Lead Iodide Ruddlesden-Popper (C4H9NH3)(2)(CH3NH3)(n-1)PbnI3n+1 Perovskite Thin Films

Clayton J. Dahlman et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fine Multi-Phase Alignments in 2D Perovskite Solar Cells with Efficiency over 17% via Slow Post-Annealing

Guangbao Wu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation on Crystallization of CH3NH3PbI3 Perovskite and Its Intermediate Phase from Polar Aprotic Solvents

Yahui Li et al.

CRYSTAL GROWTH & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhance the performance and stability of methylammonium lead iodide perovskite solar cells with guanidinium thiocyanate additive

Nian Cheng et al.

CURRENT APPLIED PHYSICS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Uniform Permutation of Quasi-2D Perovskites by Vacuum Poling for Efficient, High-Fill-Factor Solar Cells

Jia Zhang et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Highly Efficient Guanidinium-Based Quasi 2D Perovskite Solar Cells via a Two-Step Post-Treatment Process

Yingzhu Zhang et al.

SMALL METHODS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Exploration of Crystallization Kinetics in Quasi Two-Dimensional Perovskite and High Performance Solar Cells

Ning Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Phase Transition Control for High Performance Ruddlesden-Popper Perovskite Solar Cells

Xu Zhang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid Dion-Jacobson 2D Lead Iodide Perovskites

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Multidisciplinary Sciences

Enhanced photovoltage for inverted planar heterojunction perovskite solar cells

Deying Luo et al.

SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Aligned and Graded Type-II Ruddlesden-Popper Perovskite Films for Efficient Solar Cells

Jian Qing et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

2D Ruddlesden-Popper Perovskites for Optoelectronics

Yani Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Phase Transition Control for High-Performance Blade-Coated Perovskite Solar Cells

Jianbo Li et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid Perovskite Thin-Film Photovoltaics: In Situ Diagnostics and Importance of the Precursor Solvate Phases

Rahim Munir et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Crystal Structure of DMF-Intermediate Phases Uncovers the Link Between CH3NH3PbI3 Morphology and Precursor Stoichiometry

Andrey A. Petrov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Thermodynamic Stability Trend of Cubic Perovskites

Qingde Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Physical

Guanidinium thiocyanate selective Ostwald ripening induced large grain for high performance perovskite solar cells

Ngoc Duy Pham et al.

NANO ENERGY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Organic-Inorganic Perovskites: Structural Versatility for Functional Materials Design

Bayrammurad Saparov et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases

Lijian Zuo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Perovskite energy funnels for efficient light-emitting diodes

Mingjian Yuan et al.

NATURE NANOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable Grain Morphology of Perovskite Absorber Film by Molecular Self-Assembly toward Efficient Solar Cell Exceeding 17%

Wenzhe Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Structural diversity in hybrid organic-inorganic lead iodide materials

Oliver J. Weber et al.

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable Perovskite Crystallization at a Gas-Solid Interface for Hole Conductor-Free Solar Cells with Steady Power Conversion Efficiency over 10%

Feng Hao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.