4.8 Article

Experimental and Theoretical Studies toward Superior Anti-corrosive Nanocomposite Coatings of Aminosilane Wrapped Layer-by-Layer Graphene Oxide@MXene/Waterborne Epoxy

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

A New Self-Healing Triboelectric Nanogenerator Based on Polyurethane Coating and Its Application for Self-Powered Cathodic Protection

Weixiang Sun et al.

Summary: With the demand for carbon neutrality increasing, researchers have turned their attention to the development of renewable and recycle green energy. In this study, a novel self-healing triboelectric nanogenerator was constructed using a linear silicone-modified polyurethane coating. This coating effectively alleviated the damages of the TENG devices during long-term energy harvesting. The self-healing TENG exhibited stable output performance and was used to power a self-powered cathodic protection system for anti-corrosion effect.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Structure and performance insights in carbon dots-functionalized MXene-epoxy ultrathin anticorrosion coatings

Jiheng Ding et al.

Summary: Functionalized MXene nanosheets with carbon dots significantly improve the chemical stability of MXene in water and enhance the anticorrosion performance of epoxy composite coatings through a flow-induced approach. The unique structure of CD-Ti3C2Tx platelets inhibits corrosion-promotion activity and improves the stability and durability of the coatings for heavy-anticorrosion applications in harsh sea environments.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Composites

Protein-induced decoration of applying MXene directly to UHMWPE fibers and fabrics for improved adhesion properties and electronic textiles

Jiali Yu et al.

Summary: MXene, a promising material with high conductivity and other superior properties, was successfully used to decorate UHMWPE fiber and fabrics with the help of BSA. The functionalization of MXene improved the surface properties of UHMWPE fiber, leading to enhanced mechanical engagement and interfacial strength. Additionally, the conductivity of MXene enabled the UHMWPE/BSA/MXene fiber to be used as a conductor for electronic textiles.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Article Nanoscience & Nanotechnology

A high-performance waterborne polymeric composite coating with long-term anti-corrosive property based on phosphorylation of chitosan-functionalized Ti3C2Tx MXene

Xiaoling He et al.

Summary: A novel nanofiller, phosphoric acid-modified chitosan (mCS)-functionalized MXene (fMX), has been successfully constructed and used to enhance the corrosive resistance of waterborne epoxy (WEP) coatings.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Chemistry, Multidisciplinary

Mxene structure: A key parameter in corrosion barrier performance of organic coatings

Ziyang Zhou et al.

Summary: The research demonstrates that fresh MXene has a better impact on the performance of waterborne epoxy coatings, showing higher barrier performance, anti-corrosion behavior, adhesion strength, and water contact angle compared to oxidized MXene.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Article Engineering, Environmental

Distinctive roles of graphene oxide, ZnO quantum dots, and their nanohybrids in anti-corrosion and anti-fouling performance of waterborne epoxy coatings

Ziyang Zhou et al.

Summary: In this research, amino-silane functionalized ZnO quantum dots (F-ZnO QDs), graphene oxide (F-GO), and their nanohybrids (F-GO@ZnO QDs) were used as effective nanofillers to improve the anti-corrosion and antifouling properties of waterborne epoxy coatings. The synthesized nanomaterials were characterized before and after silane functionalization. The nanocomposite waterborne epoxy coatings loaded with different nanofillers were prepared and their effects on surface roughness, water contact angle, adhesion strength, fracture surface, and corrosion resistance were considered. The results showed that the F-GO@ZnO QDs provided the highest barrier and corrosion resistance on the steel substrates, and the nanocomposite coatings exhibited higher water contact angle and adhesion strength. The antibacterial and antifouling properties of the coatings were also confirmed. The multifunctional performance of the epoxy/F-GO@ZnO QDs was attributed to the synergy effect between the GO, ZnO QDs, and amino-silane, highlighting the importance of nanohybrids in combining the advantages of different nanomaterials in one coating system.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Passiflora edulia Sims leaves Extract as renewable and degradable inhibitor for copper in sulfuric acid solution

Bochuan Tan et al.

Summary: In this study, Passiflora edulia Sims leaves extract (PESLE) was obtained using a simple and environmentally friendly water extraction method. The research demonstrated that PESLE can effectively inhibit copper corrosion in sulfuric acid medium. Experimental and theoretical calculations showed that PESLE at a concentration of 800 mg/L achieved a corrosion inhibition efficiency of approximately 96%. The anti-corrosion capacity of PESLE remained at around 95% even at a temperature of 318 K. Morphology tests indicated that PESLE was adsorbed onto the copper interface, effectively protecting the copper sample and resulting in a relatively flat surface. XPS test results confirmed the chemical adsorption of PESLE onto the copper interface through the detection of Cu-N bonds. Quantum chemistry calculations and molecular dynamics simulations demonstrated the high anti-corrosion property of the three components of PESLE.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Engineering, Chemical

One-Pot Fabrication of an MXene-ZrP@PDA Heterojunction for Enhanced Corrosion/Wear Resistance of Waterborne Epoxy Coatings

Xiaoling He et al.

Summary: In this study, MXene-ZrP@PDA was incorporated into a waterborne epoxy coating to prepare an MZP/WEP composite coating with excellent corrosion protection and wear resistance. The corrosion rate of MZP/WEP was one order of magnitude lower than that of blank WEP, and the average coefficient of friction of the composite coating decreased significantly.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Article Materials Science, Multidisciplinary

Silicone/graphene oxide co-cross-linked aerogels with wide-temperature mechanical flexibility, super-hydrophobicity and flame resistance for exceptional thermal insulation and oil/water separation

Zhao-Hui Zhang et al.

Summary: In this study, a facile and versatile ambient drying strategy was reported to fabricate silicone composite aerogels modified with functionalized graphene oxide (FGO). The optimized silicone/FGO aerogels demonstrated excellent mechanical reliability, flame resistance, super-hydrophobicity, and thermal insulating performance, as well as efficient oil absorption and separation capacity for various solvents and oil from water.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Biochemistry & Molecular Biology

Supported MXene/GO Composite Membranes with Suppressed Swelling for Metal Ion Sieving

Zongjie Yin et al.

Summary: The study introduces 2D cross-linked MXene/GO composite membranes supported on porous polyamide substrates to improve anti-swelling property and enhance ion-sieving performance for water purification. The permeation rates of metal ions through the cross-linked composite membrane were significantly lower and showed excellent Na+ rejection performance compared to pristine membranes, demonstrating improved ion exclusion performance.

MEMBRANES (2021)

Article Chemistry, Physical

Insight into anticorrosion/antiwear behavior of inorganic-organic multilayer protection system composed of nitriding layer and epoxy coating with Ti3C2Tx MXene

Han Yan et al.

Summary: The synergy of plasma nitriding technique and epoxy composite coating is an effective strategy to protect aluminum (Al) alloys from corrosion and wear. The inorganic-organic multilayer protection system, composed of nitriding layer and Ti3C2Tx/epoxy coating, shows significant improvements in electrochemical impedance and wear rate, making it a promising candidate for antiwear and anticorrosion applications.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Manufacturing

Investigating the effects of g-C3N4/Graphene oxide nanohybrids on corrosion resistance of waterborne epoxy coatings

Ziyang Zhou et al.

Summary: This study demonstrates the use of GO@CN nanohybrids to enhance the corrosion resistance of waterborne epoxy coatings. The findings suggest that adding 0.1 wt% silane functionalized GO@CN to epoxy coatings provides the highest chemical stability and corrosion resistance.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Chemistry, Physical

Facile design of graphene oxide-ZnO nanorod-based ternary nanocomposite as a superhydrophobic and corrosion-barrier coating

Mohamed S. Selim et al.

Summary: A ternary nanocomposite of PDMS/GO-ZnO was designed for superhydrophobic and anticorrosion properties, with the silicone composite containing 1 wt.% of GO-ZnO hybrid nanofillers showing excellent coating performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Electrochemistry

Preparation of graphene oxide-boron nitride hybrid to reinforce the corrosion protection coating

Xiaoling Liu et al.

Summary: In this study, coatings based on a graphene oxide-boron nitride/epoxy (GO-BN/EP) system were fabricated and applied for corrosion protection of metal substrates. The GO-BN hybrid sheet, with higher lipophilicity than GO and BN, showed excellent dispersibility in epoxy coating and outstanding barrier properties for corrosive ions in a 3.5 wt% NaCl solution. This research presents an innovative method for synthesizing GO-BN hybrid for corrosion protection applications.

CORROSION REVIEWS (2021)

Article Chemistry, Applied

Reinforced anticorrosion performance of waterborne epoxy coating with eco-friendly L-cysteine modified Ti3C2Tx MXene nanosheets

Sihao Li et al.

Summary: In this study, MXene was successfully functionalized with L-Cysteine and incorporated into waterborne epoxy coating to enhance corrosion resistance. The well dispersion of functionalized MXene nanosheets and the enhanced barrier properties offered by them were found to be crucial factors contributing to the improved corrosion resistance of the coating.

PROGRESS IN ORGANIC COATINGS (2021)

Review Materials Science, Multidisciplinary

Recent advances in developing the MXene/polymer nanocomposites with multiple properties: A review study

Hamed Aghamohammadi et al.

Summary: MXene, a novel 2D nanomaterial synthesized by selective etching of A elements in MAX phases, has unique mechanical, tribological, thermal, and electrical properties, making it suitable for reinforcing polymeric composites. However, research on the properties of MXene/polymer nanocomposites is still limited.

SYNTHETIC METALS (2021)

Article Chemistry, Physical

Hybrid MXene/reduced graphene oxide aerogel microspheres for hydrogen evolution reaction

Yu Cheng et al.

Summary: MXene/rGOAMs are aerogel microspheres prepared by electrospraying, freeze-drying, and thermal annealing, with abundant pores and self-supporting structure, suitable for hydrogen evolution reaction due to prevention of stacking 2D layers for enhanced mass transfer.

IONICS (2021)

Article Engineering, Environmental

GO-Ti3C2 two-dimensional heterojunction nanomaterial for anticorrosion enhancement of epoxy zinc-rich coatings

Lu Shen et al.

Summary: MXenes, a unique family of 2D transition metal carbides/nitrides, have been proven useful for enhancing cathodic protection and corrosion resistance in coatings. The incorporation of MXene onto graphene oxide nanosheets in coatings can effectively improve the performance by enhancing zinc utilization and providing barrier protection. The designed heterojunction structure shows optimal corrosion resistance among the four types of coatings.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Polymer Science

Engineering MXenes (Ti3C2Tx) surface with TiO2 for enhancing anti-corrosion performance of coatings

Fengyuan Zhang et al.

Summary: Functional Ti3C2Tx sheets were modified with TiO2 and introduced into waterborne polyurethane (WPU) coating, leading to excellent corrosion resistance. The composite coating with 0.1 wt% Ti3C2&TiO2 showed the highest impedance after immersion, and Tafel curves revealed the lowest corrosion current and rate for WPU/0.1%Ti3C2&TiO2 composite coating.

POLYMER (2021)

Article Chemistry, Multidisciplinary

Quality Evaluation of Epoxy Pore Casts Using Silicon Micromodels: Application to Confocal Imaging of Carbonate Samples

Ahmed Hassan et al.

Summary: This study aims to investigate and optimize the parameters of epoxy pore casting, such as impregnation pressure, using silicon micromodels as a reference. Possible defects during casting, such as resin shrinkage and gas trapping, were demonstrated. An optimized protocol was developed to produce high-quality resin pore casts for high-resolution 3D imaging and the description of microporosity in micritic carbonates.

APPLIED SCIENCES-BASEL (2021)

Article Materials Science, Composites

Thermal conductivity and anti-corrosion of epoxy resin based composite coatings doped with graphene and graphene oxide

Long Chen et al.

Summary: The study found that composite coatings with GR and GO have higher anti-corrosion efficiency, with the 0.89% mass fraction of GR and GO composite coating showing the highest anti-corrosion efficiency, reaching as high as 92.57% compared to pure EP coating. The dispersion effect of GR and GO in the substrate is crucial for the corrosion resistance of the coating.

COMPOSITES PART C: OPEN ACCESS (2021)

Article Nanoscience & Nanotechnology

Air-Stable Titanium Carbide MXene Nanosheets for Corrosion Protection

Hongran Zhao et al.

Summary: This study focuses on the preparation of oxidation-resistant and highly stable MXene nanosheets through noncovalent functionalization for enhanced corrosion protection in waterborne epoxy coatings. The improved anticorrosion performance was confirmed by electrochemical analysis and visual observation of reduced corrosion on steel surfaces coated with the MXene-enhanced epoxy.

ACS APPLIED NANO MATERIALS (2021)

Article Materials Science, Multidisciplinary

Anticorrosive and UV-blocking waterborne polyurethane composite coating containing novel two-dimensional Ti3C2 MXene nanosheets

Xinxin Sheng et al.

Summary: In this study, Ti3C2 MXene was introduced into waterborne polyurethane coatings, forming a composite coating with excellent corrosion resistance and UV-blocking properties.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Chemistry, Applied

Highly dispersed graphene oxide-zinc oxide nanohybrids in epoxy coating with improved water barrier properties and corrosion resistance

Nurul Husna Othman et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2020)

Article Chemistry, Physical

Non-covalently functionalized boron nitride by graphene oxide for anticorrosive reinforcement of water-borne epoxy coating

Youqing Wu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Engineering, Environmental

Two-Dimensional Ti3C2Tx MXene/GO Hybrid Membranes for Highly Efficient Osmotic Power Generation

Haiping Gao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Review Chemistry, Physical

Ti3C2Tx MXene/graphene nanocomposites: Synthesis and application in electrochemical energy storage

Yanyue Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Multidisciplinary

Surface modification of mild steel before acrylic resin coating by hybrid ZnO/GO nanostructures to improve the corrosion protection

Zahra Sharifalhoseini et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Article Chemistry, Physical

Interaction of graphene oxide with barium titanate in composite: XPS and DFT studies

D.W. Boukhvalov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Chemistry, Multidisciplinary

Polymer/Inorganic nanocomposite coatings with superior corrosion protection performance: A review

Sepideh Pourhashem et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Article Multidisciplinary Sciences

Super-tough MXene-functionalized graphene sheets

Tianzhu Zhou et al.

NATURE COMMUNICATIONS (2020)

Review Engineering, Chemical

Two-Dimensional Nanomaterials for Anticorrosive Polymeric Coatings: A Review

Haowei Huang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Multidisciplinary

Creating MXene/reduced graphene oxide hybrid towards highly fire safe thermoplastic polyurethane nanocomposites

Chuan Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Environmental

Easy-to-prepare graphene oxide/sodium montmorillonite polymer nanocomposite with enhanced adsorption performance

Payam Arabkhani et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Article Nanoscience & Nanotechnology

Compressible Highly Stable 3D Porous MXene/GO Foam with a Tunable High-Performance Stealth Property in the Terahertz Band

Wenle Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Composites

Properties of two-dimensional Ti3C2 MXene/thermoplastic polyurethane nanocomposites with effective reinforcement via melt blending

Xinxin Sheng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Applied

Ti3C2 MXene nanosheets toward high-performance corrosion inhibitor for epoxy coating

Han Yan et al.

PROGRESS IN ORGANIC COATINGS (2019)

Article Nanoscience & Nanotechnology

3D Porous MXene (Ti3C2)/Reduced Graphene Oxide Hybrid Films for Advanced Lithium Storage

Zhiying Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Multidisciplinary Sciences

Vertical Alignment of Liquid Crystals Over a Functionalized Flexible Substrate

B. Sivaranjini et al.

SCIENTIFIC REPORTS (2018)

Article Chemistry, Multidisciplinary

Thermally Reduced Graphene/MXene Film for Enhanced Li-ion Storage

Shuaikai Xu et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Article Materials Science, Coatings & Films

Investigating the effect of SiO2-graphene oxide hybrid as inorganic nanofiller on corrosion protection properties of epoxy coatings

Sepideh Pourhashem et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

Excellent corrosion protection performance of epoxy composite coatings filled with amino-silane functionalized graphene oxide

Sepideh Pourhashem et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel

Sepideh Pourhashem et al.

CORROSION SCIENCE (2017)

Article Chemistry, Multidisciplinary

Layered Orthorhombic Nb2O5@Nb4C3Tx and TiO2@Ti3C2Tx Hierarchical Composites for High Performance Li-ion Batteries

Chuanfang (John) Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Physical

X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)

Joseph Halim et al.

APPLIED SURFACE SCIENCE (2016)

Article Chemistry, Physical

Ion-Exchange and Cation Solvation Reactions in Ti3C2 MXene

Michael Ghidiu et al.

CHEMISTRY OF MATERIALS (2016)

Review Chemistry, Physical

Adsorption structures and energetics of molecules on metal surfaces: Bridging experiment and theory

Reinhard J. Maurer et al.

PROGRESS IN SURFACE SCIENCE (2016)

Article Nanoscience & Nanotechnology

Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties

Kanit Hantanasirisakul et al.

ADVANCED ELECTRONIC MATERIALS (2016)

Article Materials Science, Multidisciplinary

Palladium interaction with silicon carbide

M. Gentile et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Coatings & Films

Preparation of graphene oxide modified by titanium dioxide to enhance the anti-corrosion performance of epoxy coatings

Zongxue Yu et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Article Engineering, Manufacturing

Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide

Yan-Jun Wan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Physics, Multidisciplinary

Theoretical study of PTCDA adsorbed on the coinage metal surfaces, Ag(111), Au(111) and Cu(111)

L. Romaner et al.

NEW JOURNAL OF PHYSICS (2009)