4.5 Article

High-Efficiency and High-Power Multijunction InGaAs/InP Photovoltaic Laser Power Converters for 1470 nm

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Band-gap material selection for remote high-power laser transmission

Eduardo F. Fernandez et al.

Summary: HPLT technology, utilizing a monochromatic light source and photovoltaic converter, has the potential to transmit high power over kilometers without wires. However, the current efficiency needs improvement. Research shows that high energy gap materials like ZnS or 6H-SiC could significantly enhance system performance, increasing current values by over 30%.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Review Chemistry, Physical

Beaming power: Photovoltaic laser power converters for power-by-light

Carlos Algora et al.

Summary: This review provides an overview of photovoltaic laser power converters (PVLPCs) and their functionalities and critical requirements in power-by-light (PBL) systems. A detailed comparison among different types of PVLPCs is conducted, highlighting their advantages and disadvantages. The review also discusses the perspectives and potential ways to improve the efficiency of PVLPCs.

JOULE (2022)

Article Physics, Applied

A 46.7% efficient GaInP photonic power converter under high-power 638 nm laser uniform irradiation of 1.5 W cm-2

Kazuki Kurooka et al.

Summary: Researchers have improved the efficiency of photonic power converters under high-power laser irradiation by achieving a uniform laser intensity distribution and reducing the distance between electrodes on the converter cell surface. The GaInP converter cell showed the highest conversion efficiency under uniform laser irradiation of specific wavelength and power.

APPLIED PHYSICS EXPRESS (2022)

Article Energy & Fuels

Optical Wireless Power Transmission Using a GaInP Power Converter Cell under High-Power 635 nm Laser Irradiation of 53.5 W/cm2

Yiu Leung Wong et al.

Summary: This study investigated the optical transmission efficiency and photoelectric conversion efficiency of optical wireless power transmission system. The results showed that higher level of optical wireless power transmission could be achieved by expanding the converter cell area.

ENERGIES (2022)

Article Energy & Fuels

Laser Power Converter Architectures Based on 3C-SiC with Efficiencies >80%

Javier F. Lozano et al.

Summary: High power laser transmission technology overcomes the limitations of conventional wiring by transferring energy through a monochromatic laser to a photovoltaic receiver. This study proposes two novel laser power converters that overcome the limitations of current technology by exploring different architectures and materials, achieving high efficiencies.

SOLAR RRL (2022)

Article Energy & Fuels

Integrated series/parallel connection for photovoltaic laser power converters with optimized current matching

Lukas Wagner et al.

Summary: This paper introduces a stepped architecture optimized for high-voltage laser power converter photovoltaic (PV) cells, which shows superior misalignment tolerance and current matching performance compared to multisegment cells. The authors also present the first realization of stepped PV cells with two stacked GaAs-based pn-junctions and investigate the effects of segmentation and number of stacked junctions on their characteristics.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Physics, Applied

Characteristics of 1520 nm InGaAs multijunction laser power converters

An-Cheng Wang et al.

Summary: This study demonstrates high efficiency and superior performance of In0.53Ga0.47As multijunction LPCs in converting laser energy around 1520 nm, with minimal current mismatching degree near room temperature. Furthermore, characterization under different temperatures and laser powers shows stable temperature coefficients of the open circuit voltage and conversion efficiency.

APPLIED PHYSICS LETTERS (2021)

Article Energy & Fuels

Experimental coupling process efficiency and benefits of back surface reflectors in photovoltaic multi-junction photonic power converters

Esther Lopez et al.

Summary: This study experimentally quantified the efficiency of luminescence coupling in three-junction photonic power converters based on GaAs/AlGaAs rear hetero-junction subcells. The results showed a coupling process efficiency of 32% +/- 9% from top and middle subcells to the limiting bottom subcell. The observed coupling reduced the current mismatch induced by temperature changes from 4.4% to 1.6% under constant monochromatic illumination. Additionally, the implementation of back surface reflectors in the power converters improved device response at elevated temperatures by redirecting emitted photons towards upper subcells to reinforce luminescence coupling.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Physics, Applied

Perspective on photovoltaic optical power converters

Simon Fafard et al.

Summary: Optical wireless power transmission using III-V semiconductor devices for high-efficiency power conversion is a promising technology for applications that cannot access traditional power sources. The development of novel multijunction designs has enabled fiber-based and free-space applications to progress to higher electrical powers, utilizing laser diode products available at various wavelengths. Advancements in photovoltaic multijunction power-converting devices have demonstrated high conversion efficiencies and output powers in this study, showing potential for enabling more probe, sensor, and electronic subsystem power capabilities.

JOURNAL OF APPLIED PHYSICS (2021)

Article Physics, Applied

High current density tunnel diodes for multi-junction photovoltaic devices on InP substrates

M. N. Beattie et al.

Summary: The study demonstrates significant performance enhancement of InAlGaAs tunnel diodes lattice-matched to InP and grown by molecular beam epitaxy, achieved by lowering the growth temperature of the p-type tunnel diode layers. The diodes are transparent to certain wavelengths and compatible with InP-based multi-junction solar cells and photonic power converters. Incorporation of the tunnel diodes into a dual-junction photonic power converter test structure leads to a halving of the short-circuit current and a doubling of the open-circuit voltage compared to a single junction reference device under 1319nm laser illumination.

APPLIED PHYSICS LETTERS (2021)

Article Physics, Applied

Intrinsic losses in photovoltaic laser power converters

Minshen Lin et al.

Summary: The study examines the loss mechanisms and optimization methods for using photovoltaic cells as photovoltaic laser power converters. It finds that the major loss mechanism in photovoltaic laser power converters is entropic loss, and that intrinsic losses can be reduced by increasing laser irradiance and using spectral and angular filters.

APPLIED PHYSICS LETTERS (2021)

Article Physics, Applied

A 43.0% efficient GaInP photonic power converter with a distributed Bragg reflector under high-power 638 nm laser irradiation of 17 W cm-2

Yuki Komuro et al.

Summary: Optical wireless power transmission systems incorporating photovoltaic cells and lasers have the potential to serve as next-generation energy supply devices for automobiles and autonomous underwater vehicles. High photoelectric conversion efficiencies of over 40% are required for practical applications, with GaInP photonic power converters achieving up to 43.0% efficiency under high-power laser irradiation. Additionally, the highest efficiency of 46.0% was obtained at lower laser irradiation levels of 1.1 W cm(-2).

APPLIED PHYSICS EXPRESS (2021)

Article Engineering, Electrical & Electronic

Over 40-W Electric Power and Optical Data Transmission Using an Optical Fiber

Motoharu Matsuura et al.

Summary: The article demonstrates simultaneous 40-W electric power and optical data transmission through an optical fiber for optically powered remote antenna units in future mobile communication networks. By improving the link design and using a photovoltaic power converter, the electric power delivery is successfully increased to 43.7W with high optical-to-electrical conversion efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Physics, Applied

Graded buffer Bragg reflectors with high reflectivity and transparency for metamorphic optoelectronics

R. M. France et al.

Summary: A graded buffer Bragg reflector (GBBR) is designed and demonstrated for specific metamorphic solar cell applications, offering high reflectivity buffers for quantum well and optically thin solar cells, as well as low sidelobe reflection for multijunction devices. Apodized and triple GBBRs are showcased, with consideration for transparency and carefully engineered material combinations. The GBBRs exhibit high reflectivity and potential for improvement, with applications beyond solar cells to optoelectronic devices like LEDs and lasers.

JOURNAL OF APPLIED PHYSICS (2021)

Article Optics

AlGaAs gradient waveguides for vertical p/n junction GaAs laser power converters

Alexander Panchak et al.

Summary: This study focuses on the theoretical investigation of waveguide properties associated with the refractive index profile in AlGaAs/GaAs vertical p/n junction laser power converters, considering different cases of aluminum distribution where the refractive index in the waveguide is linear, exponential, and logarithmic.

OPTICS AND LASER TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

68.9% Efficient GaAs-Based Photonic Power Conversion Enabled by Photon Recycling and Optical Resonance

Henning Helmers et al.

Summary: For solar cells operating under the broad-band solar spectrum, photovoltaic conversion efficiency is limited by transmission and thermalization losses. Photon recycling can increase effective excess carrier concentration, boosting photovoltage and therefore conversion efficiency.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2021)

Article Energy & Fuels

Power and Spectral Range Characteristics for Optical Power Converters

Simon Fafard et al.

Summary: High-performance optical power converters (OPCs) enable isolated electrical power and power beaming applications at new wavelengths and higher output powers. Through Broadcom's vertical epitaxial heterostructure architecture (VEHSA) multi-junction OPCs, optical-to-electrical conversion at high efficiency and manageable external loads is achieved. This study extends the power outputs and spectral range options, providing details of enhancements in laser diode wavelengths such as 960-990 nm and 1500-1600 nm from the original 800-830 nm range.

ENERGIES (2021)

Article Physics, Applied

Multi-junction solar cells paving the way for super high-efficiency

Masafumi Yamaguchi et al.

Summary: High-performance solar cells, particularly multi-junction solar cells using different bandgap semiconductor materials, are considered a promising pathway towards achieving high power efficiency at low cost. III-V semiconductor materials have been shown to provide an effective system for fabricating multi-junction solar cells that can span the solar spectrum, with record efficiencies demonstrating their potential. Other materials like perovskites are also being explored for their lower manufacturing costs. The development and potential market applications of multi-junction solar cells, including III-V/Si, II-VI/Si, cadmium chalcogenide/Si, and perovskite/Si tandem solar cells, are discussed based on scientific and technological arguments.

JOURNAL OF APPLIED PHYSICS (2021)

Proceedings Paper Energy & Fuels

4-Junction GaAs Based Thin Film Photonic Power Converter with Back Surface Reflector for Medical Applications

Meike Schauerte et al.

Summary: This paper reports on the optimization of photovoltaic cells for powering medical implants optically. The study investigates the influence of incident laser wavelength and temperature on cell performance, revealing a lower sensitivity to current mismatch conditions with the presence of a gold back surface reflector. Despite the device's performance dependence on temperature and wavelength, the maximum power point voltage remains well above 3.3 V under all relevant operating conditions.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Proceedings Paper Energy & Fuels

Thin film GaAs solar cell enabled by direct rear side plating and patterned epitaxial lift-off

Jana Wulf et al.

Summary: This study presents a processing scheme for fabricating inverted GaAs solar cells using direct rear side plating and subsequent epitaxial lift-off. The results show that contact resistances well below 10(-4) Omega cm(2) can be achieved by using direct nickel plating on a palladium activated surface.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Proceedings Paper Energy & Fuels

Improvement of front-junction GaInP by point-defect injection and annealing

Ryan M. France et al.

Summary: Traditional front junction GaInP solar cells are radiation tolerant but have limited voltage and efficiency. The impact of annealing on GaInP device performance was investigated, showing that injecting point defects before annealing can improve material quality and device performance. Annealing also affects diffusion length and lifetime of the material.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Proceedings Paper Energy & Fuels

Fabrication, Measurement, and Modeling of GaInP/GaAs Three-Terminal Cells and Strings

John F. Geisz et al.

Summary: In this study, three-terminal (3T) GaInP/GaAs solar cells are fabricated using inverted-grown monolithic tandems and processed with external metal contacts suitable for easy interconnection. Prototype 3T tandems with and without tunnel junctions are demonstrated and characterized as a function of two independent variables in various configurations. The results are applicable to all 3T photovoltaics, with performance analysis fit using a 3T optoelectronic model that includes luminescent coupling and important resistances.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Proceedings Paper Energy & Fuels

Pushing the Boundaries of Photovoltaic Light to Electricity Conversion: A GaAs Based Photonic Power Converter with 68.9% Efficiency

Henning Helmers et al.

Summary: Recent results in photonic power conversion show significant improvement in voltage and light absorption by utilizing thin film processing approach and GaAs/AlGaAs rear-heterojunction photovoltaic cell with photon recycling and optical resonance effects. Maximal spectral response reaches 0.653 A/W, with a maximum monochromatic power conversion efficiency of 68.9%+/- 2.8% at 858 nm.

2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2021)

Article Physics, Condensed Matter

Energy band adjustment of 808 nm GaAs laser power converters via gradient doping

Yingjie Zhao et al.

Summary: The use of gradient doping regions in GaAs-based laser power converters improved the separation and transport efficiency of photogenerated carriers as well as reduced the total recombination rate. Compared to traditional structures, LPCs with gradient doping structures showed increased photoelectric conversion efficiency under 808 nm laser light.

JOURNAL OF SEMICONDUCTORS (2021)

Article Engineering, Electrical & Electronic

6-W Optical Power Link With Integrated Optical Data Transmission

Henning Helmers et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Energy & Fuels

Optimization of photoelectric parameters of InGaAs metamorphic laser (λ=1064 nm) power converters with over 50% efficiency

Nikolay A. Kalyuzhnyy et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Article Physics, Condensed Matter

1064 nm InGaAsP multi-junction laser power converters

Jiajing Yin et al.

JOURNAL OF SEMICONDUCTORS (2020)

Article Engineering, Electrical & Electronic

Ripple-Free Boost-Mode Power Supply Using Photonic Power Conversion

Matthew M. Wilkins et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Article Physics, Condensed Matter

Module of Laser-Radiation (λ=1064 nm) Photovoltaic Converters

V. P. Khvostikov et al.

SEMICONDUCTORS (2019)

Article Energy & Fuels

1080 nm InGaAs laser power converters grown by MOCVD using InAlGaAs metamorphic buffer layers

Youngjo Kim et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Nanoscience & Nanotechnology

Enhanced efficiency in 808 nm GaAs laser power converters via gradient doping

Yingjie Zhao et al.

AIP ADVANCES (2019)

Article Physics, Applied

High-Efficiency Conversion of High-Power-Density Laser Radiation

A. N. Panchak et al.

TECHNICAL PHYSICS LETTERS (2019)

Article Physics, Condensed Matter

Modification of Photovoltaic Laser-Power (λ=808 nm) Converters Grown by LPE

V. P. Khvostikov et al.

SEMICONDUCTORS (2018)

Article Energy & Fuels

Automated design of multi junction solar cells by genetic approach: Reaching the >50% efficiency target

Slobodan Cicic et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Energy & Fuels

On the Influence of the Photo-Induced Leakage Current in Monolithically Interconnected Modules

Rok Kimovec et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

Proceedings Paper Energy & Fuels

InGaAs Metamorphic Laser (λ=1064 nm) Power Converters with Over 44% Efficiency

Nikolay A. Kalyuzhnyy et al.

14TH INTERNATIONAL CONFERENCE ON CONCENTRATOR PHOTOVOLTAIC SYSTEMS (CPV-14) (2018)

Article Physics, Condensed Matter

Four-junction AlGaAs/GaAs laser power converter

Jie Huang et al.

JOURNAL OF SEMICONDUCTORS (2018)

Article Physics, Condensed Matter

Characterizations of high-voltage vertically-stacked GaAs laser power converter

Jie Huang et al.

JOURNAL OF SEMICONDUCTORS (2018)

Article Physics, Condensed Matter

Laser (λ=809 nm) power converter based on GaAs

V. P. Khvostikov et al.

SEMICONDUCTORS (2017)

Article Physics, Applied

Optimal laser wavelength for efficient laser power converter operation over temperature

O. Hoehn et al.

APPLIED PHYSICS LETTERS (2016)

Article Physics, Applied

Ultrahigh efficiencies in vertical epitaxial heterostructure architectures

S. Fafard et al.

APPLIED PHYSICS LETTERS (2016)

Article Physics, Condensed Matter

Photovoltaic laser-power converter based on AlGaAs/GaAs heterostructures

V. P. Khvostikov et al.

SEMICONDUCTORS (2016)

Article Multidisciplinary Sciences

Design and fabrication of six-volt vertically-stacked GaAs photovoltaic power converter

Yongming Zhao et al.

SCIENTIFIC REPORTS (2016)

Article Instruments & Instrumentation

Design and optimization of GaAs photovoltaic converter for laser power beaming

Tiqiang Shan et al.

INFRARED PHYSICS & TECHNOLOGY (2015)

Article Physics, Applied

Luminescent coupling in planar opto-electronic devices

Matthew Wilkins et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Physics, Multidisciplinary

High-Power High-Efficiency Laser Power Transmission at 100 m Using Optimized Multi-Cell GaAs Converter

He Tao et al.

CHINESE PHYSICS LETTERS (2014)

Article Engineering, Electrical & Electronic

Development and characterisation of laser power converters for optical power transfer applications

Scott D. Jarvis et al.

IET OPTOELECTRONICS (2014)

Article Physics, Applied

Efficiency limits of laser power converters for optical power transfer applications

J. Mukherjee et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)

Article Instruments & Instrumentation

Evaluation of photonic power converters

N. Eggert et al.

JOURNAL OF INSTRUMENTATION (2010)

Article Engineering, Electrical & Electronic

High-Voltage GaAs Photovoltaic Laser Power Converters

J. Schubert et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2009)

Article Energy & Fuels

GaAs converters for high power densities of laser illumination

E. Oliva et al.

PROGRESS IN PHOTOVOLTAICS (2008)