4.6 Article

Study of Orally Disintegrating Tablets Using Erythritol as an Excipient Produced by Moisture-Activated Dry Granulation (MADG)

Journal

PHARMACEUTICALS
Volume 15, Issue 8, Pages -

Publisher

MDPI
DOI: 10.3390/ph15081004

Keywords

orally disintegrating tablet; erythritol; moisture-activated dry granulation; disintegration; water activity

Funding

  1. Mochida Memorial Foundation for Medical and Pharmaceutical Research

Ask authors/readers for more resources

Moisture-activated dry granulation (MADG) is an eco-friendly granulation method that can improve tabletability and manufacturing efficiency. In this study, MADG was used to optimize the manufacturing conditions of orally disintegrating tablets (ODTs) containing erythritol. The results showed that MADG significantly reduced disintegration time and increased tablet hardness. The amount of water used in MADG had a direct impact on the disintegration time and tablet hardness, with excessive water leading to decreased hardness due to granule aggregation.
Moisture-activated dry granulation (MADG) is an eco-friendly granulation method that uses a small amount of water and insoluble excipients to absorb moisture. MADG is expected to improve productivity and reduce costs. Erythritol, an excipient used for preparing orally disintegrating tablets (ODTs), has poor tabletability and is difficult to form into tablets by conventional methods, such as high-shear granulation (HSG) and direct compression. In this study, we optimized the manufacturing conditions for ODTs to improve the tabletability of erythritol using MADG. The disintegration time of tablets made using the MADG method was approximately one-tenth that of those made using the HSG method, and the hardness was approximately 1.4 times higher. Moreover, MADG could delay disintegration and improve tabletability. We further attempted to optimize the manufacturing conditions using MADG, particularly in terms of the amount of water used. The disintegration time increased as the amount of added water increased. Moreover, water absorption tests revealed that capillary wetting decreased as the amount of water added increased, but the initial wetting did not change. These results suggested that the disintegration time was prolonged because of the increase in granule density and decrease in capillary wetting with the increase in the amount of added water. The hardness of the tablets increased because of the easy deformation of the granules after the addition of up to 3% water; however, when more than 3% water was added, the hardness decreased because of the aggregation of the granules with the excess water. Finally, two-dimensional maps of the effect of the amount of added water and water activity indicated that tablets with a hardness of >= 80 N and a disintegration time of <= 15 s could be produced by adjusting the amount of added water to within the range of 2.2-3.3% and water activity to 0.3-0.53. These results indicate that MADG can improve the tabletability of erythritol and be used for the granulation of ODTs. Tablets with appropriate hardness and disintegration properties can be produced by adjusting the water content to approximately 2.7% and the water activity to approximately 0.4 when producing ODTs with MADG.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available