☆ 4.7 Article

Antipathogenic upcycling of face mask waste into separation materials using green solvents

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Valorization of hazardous COVID-19 mask waste while minimizing hazardous byproducts using catalytic gasification

Abid Farooq et al.

Summary: This study introduces a method to valorize hazardous waste like used COVID-19 face masks through catalytic gasification using Ni-loaded ZSM-5 type zeolites. The research found that 25% Ni loading on ZSM-5 is optimal for H-2 production. Using steam as gasifying agent can reduce the content of N-containing species in the gasification product, potentially hazardous air pollutants.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Biochar-advanced thermocatalytic salvaging of the waste disposable mask with the production of hydrogen and mono-aromatic hydrocarbons

Chenxi Wang et al.

Summary: This study utilized biochar catalyst derived from corn stover to conduct catalytic pyrolysis of waste disposable masks, resulting in the production of liquid oil and hydrogen, as well as effectively capturing harmful dyes released from the masks. The biochar maintained good selectivity towards hydrogen and mono-aromatic hydrocarbons even after 10 cycles of reuse at 600 degrees Celsius. This study demonstrates a feasible concept and pathway of upcycling waste disposable masks through biochar derived from biomass waste.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Valorization of disposable COVID-19 mask through the thermo-chemical process

Sungyup Jung et al.

Summary: Wearing disposable face masks to protect against COVID-19 has become common during the pandemic, but the massive generation of contaminated masks is causing environmental concerns due to the release of toxic chemicals during disposal processes. A CO2-assisted thermo-chemical process is suggested as an environmentally friendly disposal method, simultaneously producing valuable fuels from the masks. The study focused on determining the major chemical constituents of disposable masks and employing pyrolysis to produce syngas and C1-2 hydrocarbons, showcasing a potential for environmentally benign removal of COVID-19 plastic waste.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

The Escalating Biomedical Waste Management To Control the Environmental Transmission of COVID-19 Pandemic: A Perspective from Two South Asian Countries

Mashura Shammi et al.

Summary: The COVID-19 pandemic has led to an increase in biomedical waste, posing challenges for countries like Bangladesh and India with limited resources. It is crucial to modify and modernize waste management policies to prevent environmental and community transmission risks. Recommendations include proper occupational health assessments for waste management workers and the installation of suitable capacity incinerators for appropriate waste disposal.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

An urgent call to think globally and act locally on landfill disposable plastics under and after covid-19 pandemic: Pollution prevention and technological (Bio) remediation solutions

Ana L. Patricio Silva et al.

Summary: The COVID-19 pandemic has led to a rise in landfilling and illegal waste disposal, exacerbating plastic pollution and environmental threats. Innovative technologies can improve waste management, reduce plastic leakage, and pave the way for environmental recovery. Without effective plastic policies, sustainable alternatives, and improved waste management, we may soon reach a tipping-point in natural environments worldwide.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Disinfection and Electrostatic Recovery of N95 Respirators by Corona Discharge for Safe Reuse

Sriram S. K. S. Narayanan et al.

Summary: This study investigates corona discharge as a new method for mask reuse, which can effectively disinfect masks and maintain their filtration efficiency. Masks treated with CD can be safely reused at least 10 times, with significant advantages in terms of price, accessibility, and device scalability/portability.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Increased plastic pollution due to COVID-19 pandemic: Challenges and recommendations

Ana L. Patricio Silva et al.

Summary: This article provides a comprehensive overview of the impact of COVID-19 on macroplastic pollution, emphasizing the need for future measures to balance public health and environmental safety, advocating for a shift towards sustainable alternatives, maintaining the plastic issue as a top priority on the political agenda, and suggesting early discussions on this topic.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Climate change impacts of introducing carbon capture and utilisation (CCU) in waste incineration

Thomas H. Christensen et al.

Summary: Incorporating carbon capture and utilization (CCU) technology into municipal solid waste incineration (MSWI) can reduce the climate impacts of incineration and provide carbon for various uses. The benefits of CCU applied to MSWI depend on the energy system and market for CCU products. Hydrogenation of CO2 for producing chemicals or fuels offers higher benefits in non-fossil energy systems.

WASTE MANAGEMENT (2021)

Add to Collection

Article Engineering, Environmental

Disposable masks release microplastics to the aqueous environment with exacerbation by natural weathering

Zheng Wang et al.

Summary: The study found that disposable masks exposed to shoreline environments are susceptible to UV weathering and physical abrasion from sand, leading to the release of microplastic particles and increasing the risk to marine ecosystems.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Life cycle assessment of single-use surgical and embedded filtration layer (EFL) reusable face mask

Amos Wei Lun Lee et al.

Summary: The COVID-19 pandemic has led to a surge in global face mask consumption, with reusable EFL masks showing lower environmental impact compared to single-use surgical masks, emitting less CO2 and generating less waste.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Multidisciplinary Sciences

Biochar/polypropylene composites: A study on the effect of pyrolysis temperature on crystallization kinetics, crystalline structure, and thermal stability

Abdulaziz A. Alghyamah et al.

Summary: The study found that biochar particles can act as nucleating agents, accelerating the crystallization rate of polypropylene composites. The thermal stability of BC/PP composites is significantly improved, up to 80 degrees Celsius higher than pure PP samples.

JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

COVID pollution: impact of COVID-19 pandemic on global plastic waste footprint

Nsikak U. Benson et al.

Summary: Plastic waste has significantly increased during the COVID-19 pandemic, posing potential environmental issues. Governments and businesses have the opportunity to rebuild new sustainable industries.

HELIYON (2021)

Add to Collection

Article Polymer Science

Influences of different preparation variables on polymeric membrane formation via nonsolvent induced phase separation

Catharina Kahrs et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Review Public, Environmental & Occupational Health

Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents

G. Kampf et al.

JOURNAL OF HOSPITAL INFECTION (2020)

Add to Collection

Article Engineering, Chemical

The interplay role of vanillin, water, and coagulation bath temperature on formation of antifouling polyethersulfone (PES) membranes: Application in wood extract treatment

Mohammadamin Esmaeili et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

COVID-19 Pandemic Repercussions on the Use and Management of Plastics

Joana C. Prata et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

The biodegradation of Para-xylene in seawater by a newly isolated oceanic microalga Rhodomonas sp. JZB-2

Hao Li et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Add to Collection

Article Polymer Science

Challenges in the development of new green solvents for polymer dissolution

Anna Zhenova

POLYMER INTERNATIONAL (2020)

Add to Collection

Article Environmental Sciences

Surgical face masks as a potential source for microplastic pollution in the COVID-19 scenario

Tadele Assefa Aragaw

MARINE POLLUTION BULLETIN (2020)

Add to Collection

Article Environmental Sciences

Municipal solid waste management during the SARS-COV-2 outbreak and lockdown ease: Lessons from Italy

Marco Ragazzi et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Multidisciplinary Sciences

Recycling of multilayer plastic packaging materials by solvent-targeted recovery and precipitation

Theodore W. Walker et al.

SCIENCE ADVANCES (2020)

Add to Collection

Review Immunology

A comprehensive review of the antibacterial, antifungal and antiviral potential of essential oils and their chemical constituents against drug-resistant microbial pathogens

Saika Tariq et al.

MICROBIAL PATHOGENESIS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Recycled Poly(ethylene terephthalate) for High Temperature Solvent Resistant Membranes

Bruno A. Pulido et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Thermodynamics

Bioethanol production from different Matooke peels species: A surprising source for alternative fuel

Abdulfatah Abdu Yusuf et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis, X-ray structure of organometallic ruthenium (II) p-cymene complexes based on P- and N- donor ligands and their in vitro antibacterial and anticancer studies

Parichad Chuklin et al.

JOURNAL OF ORGANOMETALLIC CHEMISTRY (2017)

Add to Collection

Article Immunology

Synergistic effect of eugenol, carvacrol, thymol, p-cymene and γ-terpinene on inhibition of drug resistance and biofilm formation of oral bacteria

Hanene Miladi et al.

MICROBIAL PATHOGENESIS (2017)

Add to Collection

Article Food Science & Technology

5-(3′,4′-Dihydroxyphenyl)-γ-valerolactoneandits sulphate conjugates, representative circulating metabolites of flavan-3-ols, exhibit anti-adhesive activity against uropathogenic Escherichia coli in bladder epithelial cells

Pedro Mena et al.

JOURNAL OF FUNCTIONAL FOODS (2017)

Add to Collection

Review Environmental Sciences

Environmental behavior and eco-toxicity of xylene in aquatic environments: A review

Weiyan Duan et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2017)

Add to Collection

Article Environmental Sciences

Medical Waste Disposal Method Selection Based on a Hierarchical Decision Model with Intuitionistic Fuzzy Relations

Wuyong Qian et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2016)

Add to Collection

Review Chemistry, Applied

Plants belonging to the genus Thymus as antibacterial agents: From farm to pharmacy

Seyed Mohammad Nabavi et al.

FOOD CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

Fabrication of a Stable Superhydrophobic Polypropylene Surface by Utilizing Acetone as a Non-Solvent

Haiyan Ji et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Multidisciplinary Sciences

Honeybee combs: how the circular cells transform into rounded hexagons

B. L. Karihaloo et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2013)

Add to Collection

Article Plant Sciences

Improvement of p-cymene antinociceptive and anti-inflammatory effects by inclusion in β-cyclodextrin

Jullyana de Souza Siqueira Quintans et al.

PHYTOMEDICINE (2013)

Add to Collection

Article Polymer Science

Effect of DMSO/H2O coagulation bath on the structure and property of polyacrylonitrile fibers during wet-spinning

Xing-Guang Dong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.