☆ 4.8 Article

Tailoring interfacial Zn2+ coordination via a robust cation conductive film enables high performance zinc metal battery

ENERGY STORAGE MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A Self-Regulated Interface toward Highly Reversible Aqueous Zinc Batteries

Daliang Han et al.

Summary: By using a low-cost ammonium acetate (NH4OAc) additive, a self-regulated zinc/electrolyte interface is built to address the issues of rapid performance deterioration of zinc anodes. The additive induces a dynamic electrostatic shielding layer around the zinc protuberance, promoting uniform zinc deposition, and acts as an interfacial pH buffer to suppress side reactions and precipitation of insoluble by-products. These findings pave the way for practical zinc batteries.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Engineering zincophilic sites on Zn surface via plant extract additives for dendrite-free Zn anode

Lei Zhang et al.

Summary: Aqueous Zn-ion batteries have the potential for large-scale energy storage due to their safety and cost-effectiveness. The addition of nettle extract helps to guide uniform zinc deposition on the anode, effectively suppressing dendrite growth and improving battery performance over extended cycling. This approach of engineering zincophilic sites through plant extracts opens up new possibilities for dendrite-free zinc anodes.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Suppressing dendrite growth and side reactions on Zn metal anode via guiding interfacial anion/cation/H2O distribution by artificial multi-functional interface layer

Miao He et al.

Summary: The introduction of a multi-functional interface layer based on ZIF can effectively inhibit parasitic reactions and dendritic growth, improve cation transfer efficiency, and reduce the impact of water molecules in the electrolyte.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

A non-flammable hydrous organic electrolyte for sustainable zinc batteries

Daliang Han et al.

Summary: Aqueous zinc batteries are safer than lithium-ion batteries, but their anodes are susceptible to dendrite failure and side reactions. The authors demonstrate a low-cost electrolyte that involves hydrate salt and organic solvent, proving to be non-flammable. The zinc battery cell delivers excellent performance even at low temperatures of -30 degrees Celsius.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Physical

Unraveling dynamical behaviors of zinc metal electrodes in aqueous electrolytes through an operando study

Yongfeng Huang et al.

Summary: This study investigates the stripping/plating behaviors and dendrite growth of metallic zinc anodes in aqueous electrolytes. It is found that the addition of Mn2+ can suppress zinc dendrite growth, and the use of Zn(CF3SO3)(2) as an electrolyte can achieve dendrite-free anodes.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Tuning Zn2+ coordination environment to suppress dendrite formation for high-performance Zn-ion batteries

Runzhi Qin et al.

Summary: The addition of ethylene glycol as an additive in aqueous electrolyte effectively inhibits the short-circuit issue induced by zinc dendrite growth in zinc-ion batteries, leading to longer cycling lifespan. By modifying the solvation sheath of zinc ions, the diffusion rate of zinc ions is reduced, promoting a uniform deposition morphology.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrolyte Design for In Situ Construction of Highly Zn 2+ ‐Conductive Solid Electrolyte Interphase to Enable High‐Performance Aqueous Zn‐Ion Batteries under Practical Conditions

Xiaohui Zeng et al.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Facile indium recovery from waste liquid crystal displays: Chloride-facilitated indium electroreduction and stepwise Cu/MoO2 and indium electrodeposition

Qingming Song et al.

Summary: The proper recycling of waste liquid crystal displays (LCDs) raises continuous concerns due to pollution control and resource recovery. Electrodeposition is a promising technique for selective metal extraction from multi-metal systems. This study explores stepwise Cu/MoO2 and In electrodeposition from InCu-Mo-Fe waste LCD leachate, showing high efficiency in indium extraction within optimized conditions.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Correction Chemistry, Physical

Ultrafast Zinc-Ion-Conductor Interface toward High-Rate and Stable Zinc Metal Batteries (vol 11, 2100186, 2021)

Huibo Yan et al.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Fluorinated interphase enables reversible aqueous zinc battery chemistries

Longsheng Cao et al.

Summary: The study introduces an aqueous zinc battery with a solid-electrolyte interphase that enables excellent performance in various tests, demonstrating its potential for practical applications in energy storage.

NATURE NANOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Polymer Glue towards 90% Zinc Utilization for 1000 Hours to Make High-Performance Zn-Ion Batteries

Yiding Jiao et al.

Summary: A new ion-selective polymer glue coated on the zinc anode allows for rapid zinc ion migration and uniform electrodeposition, resulting in a record-high zinc utilization of 90% for 1000 hours. When paired with a vanadium-based cathode, the zinc-ion battery exhibits an ultrahigh device-scale energy density of 228 Wh kg(-1), comparable to commercial lithium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Potentiometric Measurement to Probe Solvation Energy and Its Correlation to Lithium Battery Cyclability

Sang Cheol Kim et al.

Summary: In this study, a potentiometric technique was introduced to quantitatively characterize the impact of Li+ solvation energy in battery electrolytes on performance, revealing a correlation between cell potential and cycling stability. We found that solvents weakly binding to Li+ lead to improved cycling stability, as weaker solvation results in an anion-derived solid-electrolyte interphase that stabilizes cycling. This potentiometric measurement provides a guide for engineering effective electrolytes for lithium metal anodes.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Review Chemistry, Physical

Anode for Zinc-Based Batteries: Challenges, Strategies, and Prospects

Wenjing Lu et al.

Summary: This review highlights the challenges facing rechargeable aqueous zinc-based batteries (ZBBs) and the importance of rational anode design. It also summarizes the progress on mitigation strategies to suppress unwanted electrochemical reactions and provides in-depth illustrations of the relevant mechanisms behind these strategies. This perspective aims to offer comprehensive guidance for constructing high-performance and dendrite-free ZBBs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Insight into the Critical Role of Surface Hydrophilicity for Dendrite-Free Zinc Metal Anodes

Sung Hyun Park et al.

Summary: The study successfully stabilized zinc (Zn) metal anodes by building a thin and hydrophilic artificial solid electrolyte interphase (SEI) layer, which effectively inhibits parasitic side reactions and zinc dendrite growth, achieving durable cycle stability and showing promise for developing large-scale aqueous zinc-ion batteries (ZIBs).

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

A cation selective separator induced cathode protective layer and regulated zinc deposition for zinc ion batteries

Buke Wu et al.

Summary: The study introduces the application of a Zn2+ substituted Nafion separator (Zn-Nafion) in aqueous rechargeable zinc ion batteries (ARZIBs), improving the performance of both the cathode and anode. The Zn-Nafion separator limits zinc dendrite growth on the anode side and promotes the H+ reaction on the cathode side, leading to enhanced energy density and capacity retention of zinc full cells. Additionally, the Zn-Nafion separator can be recycled multiple times without performance degradation, reducing the overall cost of the battery.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly stable zinc metal anode enabled by oxygen functional groups for advanced Zn-ion supercapacitors

Kangyu Zou et al.

Summary: Konjac glucomannan has been designed to enhance Zn reversibility, with active sites redistributing Zn2+ concentration field to enable uniform Zn deposition and cycling stability in Zn-ion supercapacitors.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Reversible Zn Anode Enabled by Controllable Formation of Nucleation Sites for Zn-Based Batteries

Pengcheng Liang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Zinc Deposition Induced by Tin-Modified Multifunctional 3D Host for Stable Zinc-Based Flow Battery

Yanbin Yin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Beyond Lithium-Based Batteries

Jasper Biemolt et al.

MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Lamella-nanostructured eutectic zinc-aluminum alloys as reversible and dendrite-free anodes for aqueous rechargeable batteries

Sheng-Bo Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An In-Depth Study of Zn Metal Surface Chemistry for Advanced Aqueous Zn-Ion Batteries

Junnan Hao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An Interface-Bridged Organic-Inorganic Layer that Suppresses Dendrite Formation and Side Reactions for Ultra-Long-Life Aqueous Zinc Metal Anodes

Yanhui Cui et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

NaTi2(PO4)3Solid-State Electrolyte Protection Layer on Zn Metal Anode for Superior Long-Life Aqueous Zinc-Ion Batteries

Mengke Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Intercalation Pseudocapacitive Zn2+Storage with Hydrated Vanadium Dioxide toward Ultrahigh Rate Performance

Nonnan Liu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Corrosion-Resistant and Dendrite-Free Zinc Metal Anode in Aqueous Systems

Daliang Han et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solvation Structure Design for Aqueous Zn Metal Batteries

Longsheng Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Tailoring desolvation kinetics enables stable zinc metal anodes

Zhen Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

Scientific Challenges for the Implementation of Zn-Ion Batteries

Lauren E. Blanc et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Diethyl ether as self-healing electrolyte additive enabled long-life rechargeable aqueous zinc ion batteries

Weina Xu et al.

NANO ENERGY (2019)

Add to Collection

Article Materials Science, Coatings & Films

A low-cost SPEEK-K type membrane for neutral aqueous zinc-iron redox flow battery

Shunli Chang et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase

Zhiming Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Mechanically stable nanofibrous sPEEK/Aquivion (R) composite membranes for fuel cell applications

Carlo Boaretti et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Highly reversible zinc metal anode for aqueous batteries

Fei Wang et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Lithium Polymer Electrolytes Based on Sulfonated Poly(ether ether ketone) for Lithium Polymer Batteries

Savitha Thayumanasundaram et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

Effect of degree of sulfonation and casting solvent on sulfonated poly(ether ether ketone) membrane for vanadium redox flow battery

Jingyu Xi et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Polymer Science

The role of a metal ion within Nafion upon its physical and gas transport properties

Yanfang Fan et al.

EUROPEAN POLYMER JOURNAL (2014)

Add to Collection

Article Engineering, Chemical

Sulfonated poly (ether ether ketone)-based proton exchange membranes for vanadium redox battery applications

Suminto Winardi et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Review Chemistry, Physical

Physical and chemical modification routes leading to improved mechanical properties of perfluorosulfonic acid membranes for PEM fuel cells

Surya Subianto et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Polymer Science

Blend membranes based on disulfonated poly(aryl ether ether ketone)s (SPEEK) and poly(amide imide) (PAI) for direct methanol fuel cell usages

Chengji Zhao et al.

POLYMER (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.