☆ 4.8 Review

Combatting temperature and reverse-bias challenges facing perovskite solar cells

JOULE (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Evolution of defects during the degradation of metal halide perovskite solar cells under reverse bias and illumination

Zhenyi Ni et al.

Summary: The study reveals the location, mechanisms, and defects involved in the performance degradation of p-i-n perovskite solar cells under illumination or reverse bias. The efficiency decreases over time, yet the introduction of a hole-blocking layer between the layers can improve the reverse-bias stability. Charged iodide interstitial defects within the device layers are observed and found to contribute to efficiency degradation under both light and reverse bias conditions.

NATURE ENERGY (2022)

Add to Collection

Article Energy & Fuels

Designing Modules to Prevent Reverse Bias Degradation in Perovskite Solar Cells when Partial Shading Occurs

Eli J. Wolf et al.

Summary: When a solar cell is shaded in a panel, it can cause significant problems due to reverse bias, with some technologies using bypass diodes to address this issue. The number of solar cells that can be protected by one bypass diode needs to be explored, with singulated cell modules being easier to incorporate bypass diodes than monolithic panels. Perovskite-silicon tandems can be protected with fewer bypass diodes than single-junction perovskite modules, but if bypass diodes cannot be feasibly incorporated, deployment in utility-scale power plants is suggested.

SOLAR RRL (2022)

Add to Collection

Review Multidisciplinary Sciences

Rethinking the A cation in halide perovskites

Jin-Wook Lee et al.

Summary: The A cation in ABX(3) organic-inorganic lead halide perovskites (OLHPs) was conventionally believed to hardly affect their optoelectronic properties. However, recent developments have revealed the critical role of the A cation in regulating the physicochemical and optoelectronic properties of OLHPs.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Thermostable and Efficient Formamidinium-Based Low-Dimensional Perovskite Solar Cells

Lei Cheng et al.

Summary: A new type of MA-free FA-based low-dimensional perovskites shows superior photovoltaic performance and thermal stability compared to MA-containing 2D perovskites.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Environmental

Reducing carrier transport barrier in anode interface enables efficient and stable inverted mesoscopic methylammonium-free perovskite solar cells

Yu Chen et al.

Summary: This study presents a potential strategy for developing highly efficient and stable inverted perovskite solar cells by using Mg2+ doped CuCrO2 nanocrystals as hole-transport materials. The structured bilayer HTLs effectively shorten the charge transport pathway, reduce carrier transport barrier, and improve light harvesting efficiency. The champion PCE achieved in this study is among the highest efficiencies for inverted MA-free, cesium/formamidinium-based PSCs to date, with excellent long-term stability demonstrated.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Incorporating Electrochemical Halide Oxidation into Drift-Diffusion Models to Explain Performance Losses in Perovskite Solar Cells under Prolonged Reverse Bias

Luca Bertoluzzi et al.

Summary: Studies have shown that metal halide perovskite solar cells exhibit interesting behavior in reverse bias, including reversible performance loss and non-reversible degradation. An advanced drift-diffusion approach incorporating an electrochemical term is used to explain the losses in short-circuit, open circuit, and fill factor measured experimentally after prolonged reverse bias.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Perovskite/Silicon Tandem Solar Cells: Effect of Luminescent Coupling and Bifaciality

Klaus Jaeger et al.

Summary: By considering luminescent coupling, it is found that the energy output of perovskite/silicon tandem solar cells is higher in bifacial operation mode. Furthermore, the importance of developing optimal perovskite materials is highlighted under the conditions of optimal bandgap and high-quality materials.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tautomeric Molecule Acts as a Sunscreen for Metal Halide Perovskite Solar Cells

Yang Wang et al.

Summary: Applying a sunscreen molecule onto perovskite solar cells enhances their UV endurance and passivates defects by molecular tautomerism, significantly improving device efficiency. The sunscreen strategy enables long-term UV stability for perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Layered Perovskites Enhanced Perovskite Photodiodes

Ruiming Li et al.

Summary: This study systematically investigates the performance of layered perovskite-enhanced perovskite photodiodes and finds that adding large organic cations can reduce dark current and noise, increase detectivity, and maintain high speed. Furthermore, the layered perovskite-enhanced photodiodes exhibit less hysteresis and higher breakdown voltages.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Copolymer-Templated Nickel Oxide for High-Efficiency Mesoscopic Perovskite Solar Cells in Inverted Architecture

Faranak Sadegh et al.

Summary: This study introduces a mesoscopic NiOx scaffold formed using a triblock copolymer template-assisted strategy for use as a hole transport layer in inverted perovskite solar cells, achieving high efficiency and stability. The templated NiOx structure promotes perovskite film growth, leading to better surface coverage and larger grains, ultimately improving charge extraction and transportation while suppressing recombination. The resulting efficiency of 20.2% with minimal hysteresis is among the highest for mesoscopic inverted PSCs using NiOx films.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Pseudo-Halide Perovskite Solar Cells

Pei-Ying Lin et al.

Summary: Perovskite solar cells have achieved high power conversion efficiency, but the intrinsic instability of perovskite materials remains a key issue. Studies have shown that mixed-halide perovskites and other negative monovalent ions can improve stability. This review presents the evolution and applications of pseudo-halide perovskite solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Robust Unencapsulated Perovskite Solar Cells Protected by a Fluorinated Fullerene Electron Transporting Layer

Hsin-Hsiang Huang et al.

Summary: The introduction of new fluorinated fullerenes as an electron-transporting layer for robust perovskite photovoltaics has significantly improved power conversion efficiency and durability against environmental stressors, with the unencapsulated devices maintaining 80% of their original performance even after immersion in water for over 10 minutes.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer

Qi Cao et al.

Summary: This study introduces a star-shaped polymer to enhance charge transport and inhibit ion migration in perovskite solar cells, leading to improved efficiency and stability. Modified devices demonstrate significant performance enhancements and excellent long-term operational stability.

SCIENCE ADVANCES (2021)

Add to Collection

Review Chemistry, Physical

The role of halide oxidation in perovskite halide phase separation

Ross A. Kerner et al.

Summary: Halide perovskites exhibit non-equilibrium demixing due to halide oxidation, with the most easily oxidized species dictating segregation direction. Collaboration between material engineers and inorganic chemists is crucial to overcome these instabilities and manipulate disorder in the coordination environment.

JOULE (2021)

Add to Collection

Review Multidisciplinary Sciences

Printing strategies for scaling-up perovskite solar cells

Yulong Wang et al.

Summary: This paper discusses the high power conversion efficiency and potential of metal halide perovskite solar cells, as well as the challenges and strategies for fabricating PSCs using printing techniques. The stability of perovskite solar modules is also analyzed, with implications for printable electronic devices.

NATIONAL SCIENCE REVIEW (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced efficiency of printable mesoscopic perovskite solar cells using ionic liquid additives†

Weihua Zhang et al.

Summary: The study demonstrates the crystallization mechanism of perovskite crystals inside the mesopores of printable mesoscopic perovskite solar cells using in situ grazing-incidence X-ray diffraction. It shows that ionic liquids can universally tune the crystallization process of different perovskites in the mesopores regardless of the precursor solvents, resulting in enhanced efficiency.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

Longkai Yang et al.

Summary: The use of artemisinin as a passivation material in flexible perovskite solar cells has significantly improved their performance by enhancing V-OC and FF, reducing nonradiative recombination, and achieving a high PCE of 21.10%. The interaction between artemisinin molecules and uncoordinated Pb2+ ions has been shown to suppress the formation of deep-level trap defects and Pb clusters, leading to excellent stability under various aging conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Energy & Fuels

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

Mark V. Khenkin et al.

NATURE ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells

Lei Shi et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Instability of Tin Iodide Perovskites: Bulk p-Doping versus Surface Tin Oxidation

Damiano Ricciarelli et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Lattice Compression Increases the Activation Barrier for Phase Segregation in Mixed-Halide Perovskites

Loreta A. Muscarella et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking

Anyi Mei et al.

JOULE (2020)

Add to Collection

Article Multidisciplinary Sciences

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Amran Al-Ashouri et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Learning from existing photovoltaic technologies to identify alternative perovskite module designs

Jeremie Werner et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Instability of p-i-n perovskite solar cells under reverse bias

Ricardo A. Z. Razera et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Destructive reverse bias pinning in perovskite/silicon tandem solar modules caused by perovskite hysteresis under dynamic shading

Jiadong Qian et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

Reverse Bias Behavior of Halide Perovskite Solar Cells

Andrea R. Bowring et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Energy & Fuels

Enabling reliability assessments of pre-commercial perovskite photovoltaics with lessons learned from industrial standards

Henry J. Snaith et al.

NATURE ENERGY (2018)

Add to Collection

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Add to Collection

Editorial Material Multidisciplinary Sciences

Addressing the stability issue of perovskite solar cells for commercial applications

Lei Meng et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Impact of Perovskite/Silicon Tandem Module Design on Hot-Spot Temperature

Jiadong Qian et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Energy & Fuels

Photovoltaics in the shade: one bypass diode per solar cell revisited

Boudewijn B. Pannebakker et al.

PROGRESS IN PHOTOVOLTAICS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Konrad Domanski et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Physical

Abnormal Current-Voltage Hysteresis Induced by Reverse Bias in Organic-Inorganic Hybrid Perovskite Photovoltaics

Adharsh Rajagopal et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers

Federico Bella et al.

SCIENCE (2016)

Add to Collection

Article Energy & Fuels

Damage in Monolithic Thin-Film Photovoltaic Modules Due to Partial Shade

Timothy J. Silverman et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2016)

Add to Collection

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Perturbation Theory for Solar Cell Efficiency II-Delineating Series Resistance

Johnson Wong

IEEE TRANSACTIONS ON ELECTRON DEVICES (2013)

Add to Collection

Article Energy & Fuels

Numerical Simulations of Buried Emitter Back-Junction Solar Cells

Nils-P. Harder et al.

PROGRESS IN PHOTOVOLTAICS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.