Related references
Note: Only part of the references are listed.Self-Assembled NBR/Nomex Nanofibers as Lightweight Rubbery Nonwovens for Hindering Delamination in Epoxy CFRPs
Emanuele Maccaferri et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Nitric oxide-releasing L-Tryptophan and L-Phenylalanine based Poly(ester urea)s electrospun composite mats as antibacterial and antibiofilm dressing for wound healing
Mengna Li et al.
COMPOSITES PART B-ENGINEERING (2022)
Carbon-Nanotube-Film-Based Electrical Impedance Tomography for Structural Damage Detection of Carbon-Fiber-Reinforced Composites
Fuchao Hao et al.
ACS APPLIED NANO MATERIALS (2021)
Combinatorial effects of coral addition and plasma treatment on the properties of chitosan/polyethylene oxide nanofibers intended for bone tissue engineering
Parinaz Saadat Esbah Tabaei et al.
CARBOHYDRATE POLYMERS (2021)
Applying Acoustic Emission Technique for Detecting Various Damages Occurred in PCL Nanomodified Composite Laminates
Ali Gholizadeh et al.
POLYMERS (2021)
Self-sensing hybrid composite laminate by piezoelectric nanofibers interleaving
Tommaso Maria Brugo et al.
COMPOSITES PART B-ENGINEERING (2021)
Tuning interlaminar fracture toughness of fine z-pin reinforced polymer composite
Min Li et al.
MATERIALS & DESIGN (2021)
Evaluation of wound healing efficiency of vancomycin-loaded electrospun chitosan/poly ethylene oxide nanofibers in full thickness wound model of rat
Fatemeh Kalalinia et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)
Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers
Xin Song et al.
COMPOSITES COMMUNICATIONS (2021)
Damping and mechanical behaviour of composite laminates interleaved with rubbery nanofibers
Marco Povolo et al.
COMPOSITE STRUCTURES (2021)
How Nanofibers Carry the Load: Toward a Universal and Reliable Approach for Tensile Testing of Polymeric Nanofibrous Membranes
Emanuele Maccaferri et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2021)
Synergy between Phenoxy and CSR Tougheners on the Fracture Toughness of Highly Cross-Linked Epoxy-Based Composites
Pascal Van Velthem et al.
POLYMERS (2021)
Rubbery-Modified CFRPs with Improved Mode I Fracture Toughness: Effect of Nanofibrous Mat Grammage and Positioning on Tanδ Behaviour
Emanuele Maccaferri et al.
POLYMERS (2021)
Enhancement of the Interlaminar Fracture Toughness of a Carbon-Fiber-Reinforced Polymer Using Interleaved Carbon Nanotube Buckypaper
Yong-Chul Shin et al.
APPLIED SCIENCES-BASEL (2021)
Rubbery nanofibers by co-electrospinning of almost immiscible NBR and PCL blends
Emanuele Maccaferri et al.
MATERIALS & DESIGN (2020)
Mode II interlaminar fracture toughness of carbon nanotubes/epoxy film-interleaved carbon fiber composites
Yong Chul Shin et al.
COMPOSITE STRUCTURES (2020)
Flexible Carboxylated CNT/PA66 Nanofibrous Mat Interleaved Carbon Fiber/Epoxy Laminates with Improved Interlaminar Fracture Toughness and Flexural Properties
Yang Song et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Hydrogel Containing Anti-CD44-Labeled Microparticles, Guide Bone Tissue Formation in Osteochondral Defects in Rabbits
Eva Filova et al.
NANOMATERIALS (2020)
Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates
Emanuele Maccaferri et al.
MATERIALS & DESIGN (2020)
Experimental and analytical investigation on the interlaminar shear strength of carbon fiber composites reinforced with carbon nanofiber z-threads
Sebastian Kirmse et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Interlaminar Fracture Toughness of Carbon-Fiber-Reinforced Epoxy Composites Toughened by Poly(phenylene oxide) Particles
Yuan Huang et al.
ACS APPLIED POLYMER MATERIALS (2020)
Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance
Lode Daelemans et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Morphology, thermal, mechanical properties and ageing of nylon 6,6/graphene nanofibers as Nano2 materials
Emanuele Maccaferri et al.
COMPOSITES PART B-ENGINEERING (2019)
Selective growth of SiC nanowires in interlaminar matrix for improving in-plane strengths of laminated Carbon/Carbon composites
Qiang Song et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Sandwich-Like Nanofibrous Scaffolds for Bone Tissue Regeneration
Sarah Yahia et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Synergetic improvement of interlaminar fracture energy in carbon fiber/epoxy composites with nylon nanofiber/polycaprolactone blend interleaves
Nan Zheng et al.
COMPOSITES PART B-ENGINEERING (2019)
Excellent Nanofiber Adhesion for Hybrid Polymer Materials with High Toughness Based on Matrix Interdiffusion During Chemical Conversion
Lode Daelemans et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Toughening Epoxy Resin Using a Liquid Crystalline Elastomer for Versatile Application
Xiao-Feng Liu et al.
ACS APPLIED POLYMER MATERIALS (2019)
Delivering interlaminar reinforcement in composites through electrospun nanofibres
T. R. Pozegic et al.
ADVANCED MANUFACTURING-POLYMER & COMPOSITES SCIENCE (2019)
Mixed Mode delamination in carbon nanotube/nanofiber interlayered composites
Ozge Kaynan et al.
COMPOSITES PART B-ENGINEERING (2018)
Biofabrication of Electrospun Scaffolds for the Regeneration of Tendons and Ligaments
Alberto Sensini et al.
MATERIALS (2018)
Improving Mechanical Properties of Carbon/Epoxy Composite by Incorporating Functionalized Electrospun Polyacrylonitrile Nanofibers
Rasoul Esmaeely Neisiany et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Electrospinning of thermoplastic carboxymethyl cellulose/poly(ethylene oxide) nanofibers for use in drug-release systems
Akbar Esmaeili et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Electrospun nanofibers as reinforcement for composite laminates materials - A review
R. Palazzetti et al.
COMPOSITE STRUCTURES (2017)
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method
Lode Daelemans et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms
Lode Daelemans et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Thermal mending in immiscible poly(ε-caprolactone)/epoxy blends
Amael Cohades et al.
EUROPEAN POLYMER JOURNAL (2016)
The effects of through-the-thickness stitching on theMode I interlaminar fracture toughness of flax/epoxy composite laminates
M. Ravandi et al.
MATERIALS & DESIGN (2016)
Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils
Gareth W. Beckermann et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Use of piezoelectric as acoustic emission sensor for in situ monitoring of composite structures
Sahir Masmoudi et al.
COMPOSITES PART B-ENGINEERING (2015)
The effect of PVDF nanofibers on mode-I fracture toughness of composite materials
H. Saghafi et al.
COMPOSITES PART B-ENGINEERING (2015)
Non-reactive and reactive block copolymers for toughening of UV-cured epoxy coating
Mohamed Naguib et al.
PROGRESS IN ORGANIC COATINGS (2015)
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Crystalline Morphology of Electrospun Poly(ε-caprolactone) (PCL) Nanofibers
Xiaofeng Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Phase morphology of nanofibre interlayers: Critical factor for toughening carbon/epoxy composites
Jin Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
The effects of embedded piezoelectric fiber composite sensors on the structural integrity of glass-fiber-epoxy composite laminate
Hari P. Konka et al.
SMART MATERIALS AND STRUCTURES (2012)
Tailoring Crystallinity of Electrospun Plla Fibres by Control of Electrospinning Parameters
Olubayode Ero-Phillips et al.
POLYMERS (2012)
Criterion for interlaminar strength of CFRP laminates toughened with carbon nanofiber interlayer
Masahiro Arai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles
T. H. Hsieh et al.
JOURNAL OF MATERIALS SCIENCE (2010)
The Role of Inclusion Size in Toughening of Epoxy Resins by Spherical Micelles
Yonathan S. Thio et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2009)
Rubber-Toughened Epoxies: A Critical Review
R. Bagheri et al.
POLYMER REVIEWS (2009)
Review of z-pinned composite laminates
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Epoxy toughening using low molecular weight poly(hexylene oxide)-poly(ethylene oxide) diblock copolymers
Yonathan S. Thio et al.
MACROMOLECULES (2006)
Toughening of epoxy resins
K. P. Unnikrishnan et al.
DESIGNED MONOMERS AND POLYMERS (2006)
Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing
N Takeda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Reaction induced phase separation in semicrystalline thermoplastic/epoxy resin blends
G Vanden Poel et al.
POLYMER (2005)
Effect of aging on fractional crystallization of poly(ethylene oxide) component in poly(ethylene oxide)/poly(3-hydroxybutyrate) blends
L Zhao et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2005)
Miscibility and crystallization in crystalline/crystalline blends of poly(butylene succinate)/poly(ethylene oxide)
ZB Qiu et al.
POLYMER (2003)