Related references
Note: Only part of the references are listed.Investigation and properties of a novel composite bio-PCM to reduce summer energy consumptions in buildings of hot and dry climates
Lisa Boussaba et al.
SOLAR ENERGY (2021)
Experimental study on the thermal performance of composite phase change ventilated roof
Mingdong Hou et al.
JOURNAL OF ENERGY STORAGE (2021)
A novel approach to investigate the thermal comfort of the lightweight relocatable building integrated with PCM in different climates of Kazakhstan during summertime
Indira Adilkhanova et al.
ENERGY (2021)
Heatwaves: An invisible risk in UK policy and research
Chloe Brimicombe et al.
ENVIRONMENTAL SCIENCE & POLICY (2021)
Phase change materials integrated into building walls: An updated review
B. Lamrani et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Multi-factor analysis on thermal comfort and energy saving potential for PCM-integrated buildings in summer
Y. Qu et al.
ENERGY AND BUILDINGS (2021)
Experimental investigation on the effects of phase change material and different ventilation modes on the thermal storage, space heating and energy consumption characteristics of ventilated mortar blocks
Jiwei Guo et al.
JOURNAL OF ENERGY STORAGE (2021)
Effect of mechanical ventilation on the improvement of the thermal performance of PCM-incorporated double external walls: A numerical investigation under different climatic conditions in Morocco
Abdelaziz Mechouet et al.
JOURNAL OF ENERGY STORAGE (2021)
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Khaireldin Faraj et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system
Jasim M. Mahdi et al.
APPLIED ENERGY (2020)
Analytical model to study the heat storage of phase change material envelopes in lightweight passive buildings
Lu Bai et al.
BUILDING AND ENVIRONMENT (2020)
A review on cooling performance enhancement for phase change materials integrated systems-flexible design and smart control with machine learning applications
Yuekuan Zhou et al.
BUILDING AND ENVIRONMENT (2020)
Model establishment and operation optimization of the casing PCM radiant floor heating system
Shilei Lu et al.
ENERGY (2020)
Experimental investigation on the thermal performance of double-layer PCM radiant floor system containing two types of inorganic composite PCMs
Wanchun Sun et al.
ENERGY AND BUILDINGS (2020)
Study on thermal insulation characteristics and optimized design of pipe-embedded ventilation roof with outer-layer shape-stabilized PCM in different climate zones
Jinghua Yu et al.
RENEWABLE ENERGY (2020)
Climatic and seasonal suitability of phase change materials coupled with night ventilation for office buildings in Western China
Jiang Liu et al.
RENEWABLE ENERGY (2020)
Impact of using a PCM-metal foam composite on charging/discharging process of bundled-tube LHTES units
Ahmed Alhusseny et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Thermal management of photovoltaic module with metal matrix embedded PCM
D. M. C. Shastry et al.
JOURNAL OF ENERGY STORAGE (2020)
Multi-level uncertainty optimisation on phase change materials integrated renewable systems with hybrid ventilations and active cooling
Yuekuan Zhou et al.
ENERGY (2020)
Experimental and numerical study on the thermal performance of ventilated roof composed with multiple phase change material (VR-MPCM)
Han Li et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
A review of integrated radiant heating/cooling with ventilation systems- Thermal comfort and indoor air quality
Chen Zhang et al.
ENERGY AND BUILDINGS (2020)
Performance and control strategy development of a PCM enhanced ventilated window system by a combined experimental and numerical study
Yue Hu et al.
RENEWABLE ENERGY (2020)
Climate response of a BiPV facade system enhanced with latent PCM-based thermal energy storage
Jakub Curpek et al.
RENEWABLE ENERGY (2020)
Optimal control of natural ventilation as passive cooling strategy for improving the energy performance of building envelope with PCM integration
Cristina Piselli et al.
RENEWABLE ENERGY (2020)
Improving the energy efficiency of passive PCM system using controlled natural ventilation
Mohit Prabhakar et al.
ENERGY AND BUILDINGS (2020)
Peak indoor air temperature reduction for buildings in hot-humid climate using phase change materials
Zeyad Amin Al-Absi et al.
Case Studies in Thermal Engineering (2020)
Experimental investigation of latent heat thermal energy storage using PCMs with different melting temperatures for building retrofit
Umberto Berardi et al.
ENERGY AND BUILDINGS (2019)
Thermal building control using active ventilated block integrating phase change material
Amine Laaouatni et al.
ENERGY AND BUILDINGS (2019)
A numerical study on optimizing the designs of applying PCMs to a disaster-relief prefabricated temporary-house (PTH) to improve its summer daytime indoor thermal environment
Caixia Wang et al.
ENERGY (2019)
Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: Experimental design and response surface approach
M. Alizadeh et al.
ENERGY AND BUILDINGS (2019)
Assessing the effect of night ventilation on PCM performance in high-rise residential buildings
Shahrzad Soudian et al.
JOURNAL OF BUILDING PHYSICS (2019)
Study on the energy performance enhancement of a new PCMs integrated hybrid system with the active cooling and hybrid ventilations
Yuekuan Zhou et al.
ENERGY (2019)
Experimental testing of phase change materials in a warm-summer humid continental climate
Maris Sinka et al.
ENERGY AND BUILDINGS (2019)
Simulation and performance analysis of an active PCM-heat exchanger intended for building operation optimization
Navid Morovat et al.
ENERGY AND BUILDINGS (2019)
Analysis and design of air ventilated building integrated photovoltaic (BIPV) system incorporating phase change materials
K. Kant et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Phase change material blind system for double skin facade integration: System development and thermal performance evaluation
Yilin Li et al.
APPLIED ENERGY (2019)
Passive cooling through phase change materials in buildings. A critical study of implementation alternatives
Jesus Lizana et al.
APPLIED ENERGY (2019)
Numerical investigations on performance of phase change material Trombe wall in building
Na Zhu et al.
ENERGY (2019)
Generation of a simulation model for chilled PCM ceilings in TRNSYS and validation with real scale building data
Modar Yasin et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Study on heat-transfer mechanism of wallboards containing active phase change material and parameter optimization with ventilation
Yuekuan Zhou et al.
APPLIED THERMAL ENGINEERING (2018)
Elaboration and properties of a composite bio-based PCM for an application in building envelopes
Lisa Boussaba et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A new ventilated window with PCM heat exchanger-Performance analysis and design optimization
Yue Hu et al.
ENERGY AND BUILDINGS (2018)
Single and combined phase change materials: Their effect on seasonal transition period
Sina Memarian et al.
ENERGY AND BUILDINGS (2018)
A literature review of night ventilation strategies in buildings
Ebrahim Solgi et al.
ENERGY AND BUILDINGS (2018)
The effectiveness of phase change materials in relation to summer thermal comfort in air-conditioned office buildings
Vincenzo Costanzo et al.
BUILDING SIMULATION (2018)
Experimental heat transfer analysis of macro packed neopentylglycol with CuO nano additives for building cooling applications
K. P. Venkitaraj et al.
JOURNAL OF ENERGY STORAGE (2018)
Thermal energy and economic analysis of a PCM-enhanced household envelope considering different climate zones in Morocco
Yassine Kharbouch et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY (2018)
Overheating in buildings: lessons from research
Kevin J. Lomas et al.
BUILDING RESEARCH AND INFORMATION (2017)
Experimental study of a modified solar phase change material storage wall system
Chenglong Luo et al.
ENERGY (2017)
Establishment and experimental verification of TRNSYS model for PCM floor coupled with solar water heating system
Shilei Lu et al.
ENERGY AND BUILDINGS (2017)
PCM cooling ceilings in the Energy Efficiency Center - Regeneration behaviour of two different system designs
Helmut Weinlaeder et al.
ENERGY AND BUILDINGS (2017)
Improving thermal response of lightweight timber building envelopes during cooling season in three European locations
Luka Pajek et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review
Mohammad Saffari et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Thermal decomposition study of paraffin based hybrid rocket fuel containing Aluminum and Boron additives
Yash Pal et al.
THERMOCHIMICA ACTA (2017)
Numerical investigation of the energy performance of an Opaque Ventilated Facade system employing a smart modular heat recovery unit and a latent heat thermal energy system
Thierno M. O. Diallo et al.
APPLIED ENERGY (2017)
High resolution mapping of overheating and mortality risk
C. Liu et al.
BUILDING AND ENVIRONMENT (2017)
Energy and economic analysis of building integrated with PCM in different cities of China
Xuming Mi et al.
APPLIED ENERGY (2016)
Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes
Lidia Navarro et al.
ENERGY AND BUILDINGS (2016)
Control strategies comparison of a ventilated facade with PCM energy savings, cost reduction and CO2 mitigation
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2016)
A numerical study on the thermal performance of night ventilated hollow core slabs cast with micro-encapsulated PCM concrete
Ahmed Faheem et al.
ENERGY AND BUILDINGS (2016)
Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building
Hasnat Jamil et al.
ENERGY AND BUILDINGS (2016)
Phase change materials (PCM) for cooling applications in buildings: A review
Farah Souayfane et al.
ENERGY AND BUILDINGS (2016)
Development of free cooling based ventilation technology for buildings: Thermal energy storage (TES) unit, performance enhancement techniques and design considerations - A review
M. Alizadeh et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Hussein Akeiber et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
A review on the air-PCM-TES application for free cooling and heating in the buildings
Muriel Iten et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Increasing the efficiency of PV panel with the use of PCM
Rok Stropnik et al.
RENEWABLE ENERGY (2016)
Cooling load reduction in office buildings of hot-arid climate, combining phase change materials and night purge ventilation
Ebrahim Solgi et al.
RENEWABLE ENERGY (2016)
Application of PCM energy storage in combination with night ventilation for space cooling
Reza Barzin et al.
APPLIED ENERGY (2015)
Thermal performance of a window-based cooling unit using phase change materials combined with night ventilation
Yutong Xiang et al.
ENERGY AND BUILDINGS (2015)
Control of a PCM ventilated facade using reinforcement learning techniques
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2015)
The effect of high thermal insulation on high thermal mass: Is the dynamic behaviour of traditional envelopes in Mediterranean climates still possible?
Francesca Stazi et al.
ENERGY AND BUILDINGS (2015)
Energy performance of a ventilated double skin facade with PCM under different climates
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2015)
Impact of climate change on the domestic indoor environment and associated health risks in the UK
Sotiris Vardoulakis et al.
ENVIRONMENT INTERNATIONAL (2015)
Ventilated Trombe wall as a passive solar heating and cooling retrofitting approach; a low-tech design for off-grid settlements in semi-arid climates
Marwa Dabaieh et al.
SOLAR ENERGY (2015)
A comparative study of the CFD modeling of a ventilated active fa ade including phase change materials
G. Diarce et al.
APPLIED ENERGY (2014)
Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season
Fabrizio Ascione et al.
APPLIED ENERGY (2014)
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
Kaushik Biswas et al.
APPLIED ENERGY (2014)
Thermal performance of building element containing phase change material (PCM) integrated with ventilation system - An experimental study
Maciej Jaworski
APPLIED THERMAL ENGINEERING (2014)
A ventilated cooling ceiling with integrated latent heat storage-Monitoring results
Helmut Weinlaeder et al.
ENERGY AND BUILDINGS (2014)
Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings
G. Evola et al.
ENERGY AND BUILDINGS (2014)
Development and evaluation of a ceiling ventilation system enhanced by solar photovoltaic thermal collectors and phase change materials
Wenye Lin et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Designing building envelope with PCM wallboards: Design tool development
Arash Bastani et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Ventilated active facades with PCM
Gonzalo Diarce et al.
APPLIED ENERGY (2013)
Building integration of PCM for natural cooling of buildings
Servando Alvarez et al.
APPLIED ENERGY (2013)
A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings
G. Evola et al.
BUILDING AND ENVIRONMENT (2013)
Energy Saving Potentials of Phase Change Materials Applied to Lightweight Building Envelopes
Yoon-Bok Seong et al.
ENERGIES (2013)
Thermal analysis of a ventilated facade with PCM for cooling applications
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2013)
Review of passive PCM latent heat thermal energy storage systems towards buildings' energy efficiency
N. Soares et al.
ENERGY AND BUILDINGS (2013)
Review on phase change materials (PCMs) for cold thermal energy storage applications
E. Oro et al.
APPLIED ENERGY (2012)
Review of PCM based cooling technologies for buildings
E. Osterman et al.
ENERGY AND BUILDINGS (2012)
Use of microencapsulated PCM in buildings and the effect of adding awnings
Pablo Arce et al.
ENERGY AND BUILDINGS (2012)
Energy performance of a hybrid space-cooling system in an office building using SSPCM thermal storage and night ventilation
Guobing Zhou et al.
SOLAR ENERGY (2011)
Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation
Guobing Zhou et al.
APPLIED ENERGY (2009)
Modeling global residential sector energy demand for heating and air conditioning in the context of climate change
Morna Isaac et al.
ENERGY POLICY (2009)
Passivhaus contra bioclimatic design
Ales Krainer
BAUPHYSIK (2008)
Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage - Heat response in small scale experiments
K Nagano et al.
ENERGY AND BUILDINGS (2006)
Heat transfer enhancement in latent heat thermal storage system for buildings
U Stritih
ENERGY AND BUILDINGS (2003)
Novel ventilation cooling system for reducing air conditioning in buildings. Part I: testing and theoretical modelling
JR Turnpenny et al.
APPLIED THERMAL ENGINEERING (2000)
Share Paper
