☆ 4.5 Article

Monitoring Damage Progression in Tensile Tested SiCp/Al Composites Using Acoustic Emission

FRONTIERS IN MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Grain Refinement and Mechanical Property Improvements in Ultrasound-Assisted Brazing of SiCp/Al Composite Materials

Qinghe Cui et al.

Summary: This study investigated the effect of additional ultrasonic treatment (AUT) on grain refinement and distribution of SiC particles during the solidification process of brazed joints. The experimental results showed that AUT could effectively refine grain, promote element diffusion, and improve the macroscopic uniformity of SiC particles. The effect of AUT varied at different temperatures.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Materials Science, Ceramics

Finite element analysis and experimental investigation of ultrasonic testing of internal defects in SiCp/Al composites

Shijin Lu et al.

Summary: This study demonstrates the feasibility of ultrasonic testing for internal flat-bottom holes in SiCp/Al composites by combining finite element simulations and experiments. The propagation behavior of sound waves in specimens with pre-existing defects and the detectable size limit of internal defects were revealed through simulations and experiments, providing theoretical and practical guidance for ultrasonic testing of internal defects in SiCp/Al composites.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hot Deformation Characteristics and Microstructure Evolution of SiCp/Al2014 Composite Fabricated by Powder Metallurgy

Cuige Dong et al.

Summary: The stress-strain behavior of hot-extruded SiCp/Al2014 composites during hot deformation was studied through isothermal compression tests, resulting in the construction of a processing map at a true strain of 0.6. It was found that flow stress increased with decreasing temperature and increasing strain rate, indicating different hot deformation mechanisms at play. Instability of the composites was more likely to occur at high strain rates and low temperatures, leading to the definition of two optimal deformation processing windows on the processing map.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Engineering, Mechanical

The effect of Ni and Zr additions on hardness, elastic modulus and wear performance of Al-SiCp composite

Lucia Lattanzi et al.

Summary: This study investigated the wear behavior of aluminum-silicon alloys and found that the addition of silicon carbide particles can increase the elastic modulus of the material. The wear rate of all materials was within a low range, and the coefficient of friction decreased during the wear process.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Analysis of Acoustic Emission Signal to Characterization the Damage Mechanism During Drilling of Al-5%SiC Metal Matrix Composite

K. Thirukkumaran et al.

Summary: This study investigated tool wear characteristics for different tool geometries during drilling of Al-5%SiC metal matrix composite using acoustic emission technique. The findings showed that acoustic emission parameters were correlated with cutting parameters, and wavelet packet transform could distinguish different frequency components and related damage mechanisms.

SILICON (2021)

Add to Collection

Article Mechanics

Damage tolerance evaluation of a C/C-SiC composite body flap of a re-entry vehicle

F. Di Caprio et al.

Summary: This paper discusses delamination propagation in Ceramic Matrix Composites (CMC) for spacecraft applications. CMC materials are being increasingly used in aerospace for their heat resistance and structural stiffness, but delamination issues pose a potential limitation. The study performed numerical calibration of CMC material models and analyzed delamination sensitivity, highlighting the complexities in assessing damage tolerance in these materials.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Response based damage assessment using acoustic emission energy for plain concrete

Nitin B. Burud et al.

Summary: This study aims to assess damage in plain concrete using acoustic emission (AE) energy, defining three damage variables and establishing their relationships. The experimental validation confirms the effectiveness of the damage assessment approach.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Acoustic emission monitoring during open-morphological pitting corrosion of 304 stainless steel passivated in dilute nitric acid

Kaige Wu et al.

Summary: This study proposed a strategy to control the evolution of open morphology pitting corrosion in 304 stainless steel specimens, monitored the corrosion process through acoustic emission signals, and discussed the sources of acoustic emissions associated with the open morphology of pitting corrosion.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

Zhanwei Yuan et al.

Summary: The study on deformation behavior and damage mechanism of 17% SiCp/Al composites under biaxial loading shows that the material has less severe damage in the rolling normal direction compared to the two tensile directions, while still experiencing interface debonding, particle shedding, and microcrack propagation in all three directions.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of SiCp/AZ91 composites processed by a combined processing method of equal channel angular pressing and rolling

Qiong Xu et al.

Summary: In this study, SiCp/AZ91 composites with enhanced mechanical properties were obtained through a combined process of equal channel angular pressing (ECAP) and rolling. The composite processed with this method showed superior mechanical properties and improved ductility compared to the composite processed solely by rolling, thanks to the homogenized microstructure with refined grains and different crystallographic texture evolution during processing.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural, Mechanical, and Fracture Characterization of Metal Matrix Composite Manufactured by Accumulative Roll Bonding

G. S. Pereira et al.

Summary: The low-cost composite laminate produced by accumulative roll bonding showed significantly enhanced hardness, but only moderately improved tensile properties. This was mainly attributed to some degree of recrystallization, work-hardening relief due to periodic annealing, minimum grain refinement, and somewhat agglomerated carbide particles.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Energy & Fuels

Study on mechanical properties and failure mechanism of 18650 Lithium-ion battery using digital image correlation and acoustic emission

Wenfeng Hao et al.

Summary: This study investigates the mechanical properties and failure mechanisms of LIBs under bending loads using acoustic emission and three-dimensional digital image correlation techniques. The results demonstrate that the bending modulus and stiffness of the battery increase with the state of charge, and also reveal the main types of damage and expansion process during bending failure. Additionally, the study provides a new method for in-situ monitoring of LIBs, overcoming previous monitoring method limitations.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Acoustic emission characterization of tensile damage in 3D braiding composite shafts

Wenfeng Hao et al.

POLYMER TESTING (2020)

Add to Collection

Article Mechanics

Development of a dynamic constitutive model with particle damage and thermal softening for Al/SiCp composites

Wei Sun et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

A comprehensive study on flank wear progression of polycrystalline diamond micro-tool during micro end-milling of SiCp/Al composites

Ben Deng et al.

WEAR (2020)

Add to Collection

Article Nanoscience & Nanotechnology

The damage mechanism of 17vol.%SiCp/Al composite under uniaxial tensile stress

Qiuyan Shen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Acoustic emission analysis of 18,650 lithium-ion battery under bending based on factor analysis and the fuzzy clustering method

Can Tang et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Clustering of AE signals collected during torsional tests of 3D braiding composite shafts using PCA and FCM

Guoqi Zhao et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Surface roughness prediction model of SiCp/Al composite in grinding

Chuanmin Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Dissimilar Joining of Pure Aluminum to SiCp/Al-MMCs Using an AlMgGaLi Active Interlayer Foil

Biqiang Chen et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Add to Collection

Article Materials Science, Characterization & Testing

HHT-based AE characteristics of 3D braiding composite shafts

Guoqi Zhao et al.

POLYMER TESTING (2019)

Add to Collection

Article Mechanics

Acoustic emission monitoring of damage progression in 3D braiding composite shafts during torsional tests

Wenfeng Hao et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture

Xiang Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

Damage analysis of cylindrical lithium-ion cells under three-points bending using acoustic emission

Wenfeng Hao et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Simulation of anisotropic load transfer and stress distribution in sicp/Al composites subjected to tensile loading

J. F. Zhang et al.

MECHANICS OF MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of SiC particulate size on dynamic compressive properties in 7075-T6 Al-SiCp composites

Hyungsoo Lee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Mechanics

A data-driven probabilistic framework towards the in-situ prognostics of fatigue life of composites based on acoustic emission data

Theodoros Loutas et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal Properties of SiCp/Al Composites Consolidated by Equal Channel Angular Pressing and Torsion

Chen-hao Qian et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Design, fabrication, and application of thermostructural composites (TSC) like C/C, C/SiC, and SiC/SiC composites

F Christin

ADVANCED ENGINEERING MATERIALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.