☆ 4.6 Review

Current Trends in the Reconstruction and Rehabilitation of Jaw following Ablative Surgery

CANCERS (2022)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Prediction of ameloblastoma recurrence using random forest-a machine learning algorithm

R. Wang et al.

Summary: The study aimed to investigate the use of a machine learning algorithm, random forest model, to predict the recurrence of ameloblastoma. By utilizing 14 clinical parameters, decision trees were developed to classify patients. The results demonstrated that the random forest model could effectively predict the recurrence of ameloblastoma and identified the key factors influencing recurrence.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three-dimensional attachment morphometry and volumetric changes of masticatory muscles after free fibular flap reconstruction of the mandibular condyle

Shuang Bai et al.

Summary: This retrospective case-series study aimed to investigate the attachment features and volumetric changes of masticatory muscles after free fibular flap reconstruction of the mandibular condyle. The study found that the lateral pterygoid muscle achieved reattachment in most cases, while the masseter muscle showed limited reattachment. The volume of masticatory muscles on the affected side decreased significantly after surgery, while on the normal side, it almost returned to the preoperative level. Further high-quality clinical trials are needed to determine the functional implications of masticatory muscle reattachment.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2022)

Add to Collection

Article Surgery

A Comprehensive Approach for Measuring Spatial Deviations of Computer-Assisted Mandibular Reconstruction

Wei-fa Yang et al.

Summary: A comprehensive approach for measuring spatial deviations of computer-assisted mandibular reconstruction was established. The study conducted a systematic review of 80 studies and categorized the measurements based on different anatomical structures and landmarks. The results of this study will contribute to postoperative verification of computer-assisted mandibular reconstruction.

PLASTIC AND RECONSTRUCTIVE SURGERY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Spatial deviations of the temporomandibular joint after oncological mandibular reconstruction

W. -F. Yang et al.

Summary: This study investigated the impact of 3D-printed patient-specific surgical plates and the preservation of the condyle or ramus on the spatial deviations of the TMJ after oncological mandibular reconstruction. The results showed that the use of 3D-printed plates improved the spatial accuracy of the TMJ. The preservation of the condyle had a significant impact on the TMJ deviations, while the removal of both the condyle and ramus caused more severe spatial interference.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Article Oncology

A Comparative Study on a Novel Fibula Malleolus Cap to Increase the Accuracy of Oncologic Jaw Reconstruction

Jingya Jane Pu et al.

Summary: This study aimed to develop a novel patient-specific fibula malleolus cap using 3D printing technology to increase the accuracy of oncologic jaw reconstruction. The results showed that the application of the malleolus cap significantly reduced the deviations in fibula harvest location and angles, and improved the accuracy of simultaneous dental implant placement.

FRONTIERS IN ONCOLOGY (2022)

Add to Collection

Article Oncology

Augmented Reality to Assist Skin Paddle Harvesting in Osteomyocutaneous Fibular Flap Reconstructive Surgery: A Pilot Evaluation on a 3D-Printed Leg Phantom

Laura Cercenelli et al.

Summary: This study utilized augmented reality (AR) technology to assist in skin paddle harvesting surgery, and tested the registration accuracy of two display solutions as well as the success rate of the AR-guided skin paddle incision task. The results showed that the proposed marker-less AR protocol can ensure a registration error within 1-5 mm for assisting skin paddle harvesting in the clinical setting.

FRONTIERS IN ONCOLOGY (2022)

Add to Collection

Article Oncology

Unexpected Change of Surgical Plans and Contingency Strategies in Computer-Assisted Free Flap Jaw Reconstruction: Lessons Learned From 98 Consecutive Cases

Jane J. Pu et al.

Summary: This study retrospectively evaluated the rate of unexpected change of surgical plans in computer-assisted jaw reconstructions with osseous free flaps and discussed contingency strategies. The study included 98 consecutive cases and found that 5.1% of the patients needed intra-operative change of surgical plans. The study identified four clinical scenarios and concluded that comprehensive methodology can minimize the possibility of unexpected change of surgical plans.

FRONTIERS IN ONCOLOGY (2022)

Add to Collection

Article Oncology

Computer-Assisted Dental Implant Placement Following Free Flap Reconstruction: Virtual Planning, CAD/CAM Templates, Dynamic Navigation and Augmented Reality

Santiago Ochandiano et al.

Summary: Image-guided surgery, prosthetic-based virtual planning, 3D printing, and CAD/ CAM technology have revolutionized head and neck ablative and reconstructive surgical oncology, enabling accurate dental implant placement and improving quality of life. A learning curve exists for surgeons using guided methods, with dynamic navigation cases achieving the highest accuracy in implant placement. Smartphone-based augmented reality visualization is a valuable tool for intraoperative visualization and final verification, contributing to the success of free flap oncological reconstruction.

FRONTIERS IN ONCOLOGY (2022)

Add to Collection

Article Surgery

Development and Application of Digital Maxillofacial Surgery System Based on Mixed Reality Technology

Rong Yang et al.

Summary: This study achieved the three-dimensional visual output of surgical navigation information by studying the cross-linking of mixed reality display devices and high-precision optical navigators. It successfully performed mixed reality-assisted tumor resection and reconstruction.

FRONTIERS IN SURGERY (2022)

Add to Collection

Article Radiology, Nuclear Medicine & Medical Imaging

Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display

Julian Louis Muff et al.

Summary: Comparing three different methods of three-dimensional representations, VR-Glasses were rated the best for pathology understanding and anatomical representation quality, while 3D-Display was rated the best for accuracy of details and operability. A significant percentage of participants with less than ten years of professional experience reported a possible change in treatment using these three-dimensional methods.

3D PRINTING IN MEDICINE (2022)

Add to Collection

Article Oncology

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study

Wei-fa Yang et al.

Summary: In this study, 3D-printed patient-specific surgical plates were found to improve the accuracy of oncologic head and neck reconstruction compared to conventional plates. The reconstruction accuracy was superior in terms of maxilla or mandible deviation and bilateral mandibular angles with 3D-printed plates. However, no significant differences were found in terms of osteotomy accuracy, intraoperative blood loss, total operative time, or length of hospital stay between the two groups.

ANNALS OF SURGICAL ONCOLOGY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Does the Use of Computer-Assisted Surgery Affect the Margin Status in Resections of Ameloblastoma?

Benjamin Palla et al.

Summary: The study found that the use of computer-assisted surgery did not compromise the margin status in surgical resections of ameloblastoma. There were fewer instances of close or positive margins in the CAS group compared to the non-CAS group, suggesting that CAS could potentially decrease the occurrence of close or positive margins.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Augmented reality in craniomaxillofacial surgery: added value and proposed recommendations through a systematic review of the literature

M. Benmahdjoub et al.

Summary: This systematic review examines the benefits of using AR technology in craniomaxillofacial surgery, finding that AR can offer various advantages, but facing challenges such as difficulty in aggregating reported metrics, lack of statistical value from current studies, and insufficient user evaluation studies.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Medicine, Research & Experimental

Accuracy of Fibula Reconstruction Using Patient-Specific Cad/Cam Plates: A Multicenter Study on 47 Patients

Emanuele Zavattero et al.

Summary: This study evaluated the accuracy of mandibular reconstruction surgery and found that virtual surgical planning can effectively translate simulation into reality, particularly for complex reconstruction surgeries.

LARYNGOSCOPE (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Feasibility of the application of mixed reality in mandible reconstruction with fibula flap: A cadaveric specimen study

F. H. Meng et al.

Summary: The study aimed to explore the feasibility of using mixed reality technology in mandible reconstruction with fibula flap. Results showed slight deviations in the accuracy of fibular osteotomy, indicating the potential for further development to improve efficiency and precision in reconstructive surgery.

JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Materials Science, Biomaterials

Prefabricated 3D-Printed Tissue-Engineered Bone for Mandibular Reconstruction: A Preclinical Translational Study in Primate

Shuai-shuai Cao et al.

Summary: Customized bone grafts using 3D printing have shown success in repairing bone defects in vivo models. Limited research has been done on clinical translations, but promising progress is expected in this area.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

Add to Collection

Article Oncology

Deep Learning Predicts the Malignant-Transformation-Free Survival of Oral Potentially Malignant Disorders

John Adeoye et al.

Summary: Machine learning models were used to predict malignancy from oral white lesions with satisfactory performance and stability. DeepSurv and RSF were the top-performing models in terms of discrimination and calibration in internal validation. DeepSurv was more stable than RSF in cross-validation, with external validation confirming their utility for discrimination and individual survival estimates.

CANCERS (2021)

Add to Collection

Article Oncology

Case Report: Reconstruction of a Large Maxillary Defect With an Engineered, Vascularized, Prefabricated Bone Graft

Tarek Ismail et al.

Summary: The reconstruction of complex midface defects using a vascularized, engineered composite graft was successful in achieving oral rehabilitation and functional reconstruction for the patient. Despite unexpected resorption, the patient was able to return to normal diet, speech, and swallowing function postoperatively, and the results remained stable during the 2-year follow-up period.

FRONTIERS IN ONCOLOGY (2021)

Add to Collection

Letter Oncology

Artificial intelligence-enabled automatic segmentation of skull CT facilitates computer-assisted craniomaxillofacial surgery

Wei-fa Yang et al.

Summary: This study introduced an AI-enabled automatic segmentation technique for computer-assisted craniomaxillofacial surgery and demonstrated its potential. The results showed that the AI segmentation technology could meet surgical requirements, improve surgical efficiency, but more research is needed to verify its robustness.

ORAL ONCOLOGY (2021)

Add to Collection

Article Oncology

Adherence to Computer-Assisted Surgical Planning in 136 Maxillofacial Reconstructions

Hongyang Ma et al.

Summary: The study aimed to investigate adherence to planned maxillofacial reconstructions using computer-assisted surgery (CAS) and identified influential factors affecting compliance. Factors influencing compliance included defect size, bone flap segments, and type of disease. Patients with smaller defects showed higher CAS compliance, while those with multiple bone flap segments were more likely to have partial or complete abandonment of CAS.

FRONTIERS IN ONCOLOGY (2021)

Add to Collection

Article Oncology

The Learning Curve of Computer-Assisted Free Flap Jaw Reconstruction Surgery Using 3D-Printed Patient-Specific Plates: A Cumulative Sum Analysis

Wang-yong Zhu et al.

Summary: Computer-assisted jaw reconstruction (CAJR) with the use of 3D-printed patient-specific surgical plates (PSSP) demonstrated a three-stage learning curve, including initial learning, plateau, and overlearning. Surgical proficiency was achieved after 23 cases, with stabilization of total operation time, length of hospital stay, and bone graft deviation after 8-17 cases.

FRONTIERS IN ONCOLOGY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three-in-one patient-specific surgical guides for simultaneous dental implants in fibula flap jaw reconstruction: A prospective case series

Wang-yong Zhu et al.

Summary: The study aimed to evaluate the clinical outcomes of simultaneous dental implants in fibula flap using a patient-specific surgical guide. The results showed high intraoperative success, good implant survival rate, and improved accuracy of implant placement with the surgical guide.

CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

A novel 'surgeon-dominated' approach to the design of 3D-printed patient-specific surgical plates in mandibular reconstruction: a proof-of-concept study

W. -f. Yang et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Is Reconstruction of Large Mandibular Defects Using Bioengineering Materials Effective?

James C. Melville et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Surgery

Peripheral nerve repair throughout the body with processed nerve allografts: Results from a large multicenter study

Bauback Safa et al.

MICROSURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of virtual planned surgery versus conventional free-hand surgery for reconstruction of the mandible with osteocutaneous free flaps

R. Pucci et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Engineering, Biomedical

3D printed composite scaffolds with dual small molecule delivery for mandibular bone regeneration

Wenhai Zhang et al.

BIOFABRICATION (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficacy of three-dimensionally printed polycaprolactone/beta tricalcium phosphate scaffold on mandibular reconstruction

Sanghoon Lee et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Engineering, Multidisciplinary

A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction

Ruxu Du et al.

ENGINEERING (2020)

Add to Collection

Article Oncology

Do predetermined surgical margins compromise oncological safety in computer-assisted head and neck reconstruction?

Jingya Jane Pu et al.

ORAL ONCOLOGY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Osteogenesis ability of CAD-CAM biodegradable polylactic acid scaffolds for reconstruction of jaw defects

Mohamed H. Helal et al.

JOURNAL OF PROSTHETIC DENTISTRY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Supporting mandibular resection with intraoperative navigation utilizing augmented reality technology - A proof of concept study

Piotr Pietruski et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Surgery

Reconstruction of a Large Posttraumatic Mandibular Defect Using Bone Tissue Engineering With Fresh-Frozen Humeral Allograft Seeded With Autologous Bone Marrow Aspirate and Vascularized With a Radial Forearm Flap

Matthias Schlund et al.

JOURNAL OF CRANIOFACIAL SURGERY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Current Methods of Maxillofacial Tissue Engineering

James C. Melville et al.

ORAL AND MAXILLOFACIAL SURGERY CLINICS OF NORTH AMERICA (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Computer-assisted surgery for reconstruction of complex mandibular defects using osteomyocutaneous microvascular fibular free flaps: Use of a skin paddle-outlining guide for soft-tissue reconstruction. A technical report

Salvatore Battaglia et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Precision of Simultaneous Guided Dental Implantation in Microvascular Fibular Flap Reconstructions With and Without Additional Guiding Splints

Daniel Zweifel et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2019)

Add to Collection

Review Surgery

Computer-Assisted versus Conventional Freehand Mandibular Reconstruction with Fibula Free Flap: A Systematic Review and Meta-Analysis

Warit Powcharoen et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2019)

Add to Collection

Article Surgery

Evaluation of Temporomandibular Joint Movement After Mandibular Reconstruction

Masataka Shiozaki et al.

JOURNAL OF CRANIOFACIAL SURGERY (2019)

Add to Collection

Article Surgery

Combination of CAD/CAM and Augmented Reality in Free Fibula Bone Harvest

Salvatore Battaglia et al.

PLASTIC AND RECONSTRUCTIVE SURGERY-GLOBAL OPEN (2019)

Add to Collection

Article Oncology

Three-dimensional printing of patient-specific surgical plates in head and neck reconstruction: A prospective pilot study

Wei-fa Yang et al.

ORAL ONCOLOGY (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Total virtual workflow in CAD-CAM bony reconstruction with a single step free fibular graft and immediate dental implants

D. Zweifel et al.

BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2018)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing

Ji-hyeon Oh

MAXILLOFACIAL PLASTIC AND RECONSTRUCTIVE SURGERY (2018)

Add to Collection

Article Surgery

A study of an assisting robot for mandible plastic surgery based on augmented reality

Yunyong Shi et al.

MINIMALLY INVASIVE THERAPY & ALLIED TECHNOLOGIES (2017)

Add to Collection

Review Otorhinolaryngology

Three-Dimensional Printing and Its Applications in Otorhinolaryngology-Head and Neck Surgery

Trevor D. Crafts et al.

OTOLARYNGOLOGY-HEAD AND NECK SURGERY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Increasing the accuracy of mandibular reconstruction with free fibula flaps using functionalized selective laser-melted patient-specific implants: A retrospective multicenter analysis

Majeed Rana et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Virtual Surgical Planning for Inferior Alveolar Nerve Reconstruction

Michael Miloro et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Tissue Engineered Prevascularized Bone and Soft Tissue Flaps

F. Kurtis Kasper et al.

ORAL AND MAXILLOFACIAL SURGERY CLINICS OF NORTH AMERICA (2017)

Add to Collection

Article Multidisciplinary Sciences

A novel augmented reality system for displaying inferior alveolar nerve bundles in maxillofacial surgery

Ming Zhu et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Otorhinolaryngology

Bilateral inferior alveolar nerve reconstruction with a vascularized sural nerve graft included in a free fibular osteocutaneous flap after segmental mandibulectomy

Kentaro Tanaka et al.

HEAD AND NECK-JOURNAL FOR THE SCIENCES AND SPECIALTIES OF THE HEAD AND NECK (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of secondary maxillofacial reconstruction with prefabricated fibula grafts using 3D planning and guided reconstruction

Rutger H. Schepers et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Outcomes of Immediate Allograft Reconstruction of Long-Span Defects of the Inferior Alveolar Nerve

David Salomon et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Tissue-Engineered Oral Mucosa Grafts for Intraoral Lining Reconstruction of the Maxilla and Mandible With a Fibula Flap

Ramon Sieira Gil et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2015)

Add to Collection

Article Surgery

Effect of concurrent mental nerve reconstruction at the same time as mandibular reconstruction using a fibula osteoseptocutaneous flap

Fumiaki Shimizu et al.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2015)

Add to Collection

Editorial Material Surgery

Restoration of Trigeminal Cutaneous Sensation with Cross- Face Sural Nerve Grafts: A Novel Approach to Facial Sensory Rehabilitation

Joseph Catapano et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2015)

Add to Collection

Article Engineering, Biomedical

Multicenter study on the use of patient-specific CAD/CAM reconstruction plates for mandibular reconstruction

Frank Wilde et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2015)

Add to Collection

Article Surgery

SIMULATED SURGERY AND CUTTING GUIDES ENHANCE SPATIAL POSITIONING IN FREE FIBULAR MANDIBULAR RECONSTRUCTION

E. Stirling Craig et al.

MICROSURGERY (2015)

Add to Collection

Article Engineering, Biomedical

Mandible reconstruction using patient-specific pre-bent reconstruction plates: comparison of standard and transfer key methods

Frank Wilde et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2015)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Augmented reality as an aid in maxillofacial surgery: Validation of a wearable system allowing maxillary repositioning

Giovanni Badiali et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2014)

Add to Collection

Article Otorhinolaryngology

Fully 3-dimensional digitally planned reconstruction of a mandible with a free vascularized fibula and immediate placement of an implant-supported prosthetic construction

Rutger H. Schepers et al.

HEAD AND NECK-JOURNAL FOR THE SCIENCES AND SPECIALTIES OF THE HEAD AND NECK (2013)

Add to Collection

Article Surgery

The sensate fibular osteoneurocutaneous flap in oromandibular reconstruction: Clinical outcomes in 31 cases

J. Brian Boyd et al.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2013)

Add to Collection

Article Surgery

The sensate fibula osteocutaneous flap: Neurosomal anatomy

J. Brian Boyd et al.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2013)

Add to Collection

Article Medicine, Research & Experimental

Computer-assisted design and rapid prototype modeling in microvascular mandible reconstruction

Matthew M. Hanasono et al.

LARYNGOSCOPE (2013)

Add to Collection

Article Surgery

Prosthetically Guided Maxillofacial Surgery: Evaluation of the Accuracy of a Surgical Guide and Custom-Made Bone Plate in Oncology Patients after Mandibular Reconstruction

Simona Mazzoni et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2013)

Add to Collection

Editorial Material Surgery

Jaw in a Day: Total Maxillofacial Reconstruction Using Digital Technology

Jamie P. Levine et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2013)

Add to Collection

Article Surgery

Inferior alveolar nerve reconstruction with interpositional sural nerve graft: A sensible addition to one-stage mandibular reconstruction

Yang-Ming Chang et al.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2012)

Add to Collection

Article Surgery

Processed nerve allografts for peripheral nerve reconstruction: A multicenter study of utilization and outcomes in sensory, mixed, and motor nerve reconstructions

Darrell N. Brooks et al.

MICROSURGERY (2012)

Add to Collection

Article Surgery

Facial Palsy and Reconstruction

Adel Fattah et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2012)

Add to Collection

Review Neurosciences

Management of nerve gaps: Autografts, allografts, nerve transfers, and end-to-side neurorrhaphy

Wilson Z. Ray et al.

EXPERIMENTAL NEUROLOGY (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Use of Computer-Aided Design and Computer-Aided Manufacturing to Produce Orthognathically Ideal Surgical Outcomes: A Paradigm Shift in Head and Neck Reconstruction

David L. Hirsch et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2009)

Add to Collection

Article Engineering, Biomedical

Fracture of titanium plates used for mandibular reconstruction following ablative tumor surgery

Martta Martola et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2007)

Add to Collection

Article Surgery

Oromandibular reconstruction using a fibula osteocutaneous free flap: Four different preplating techniques

Claudio Marchetti et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2006)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Repair of the inferior alveolar nerve with a forearm cutaneous nerve graft after ablative surgery of the mandible

T Shibahara et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2000)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Vascularized transplantation of the long thoracic nerve for sensory reinnervation of the lower lip

G Schultes et al.

BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.