☆ 4.6 Article

Surface Coating of Needle-Punched Nonwovens with Meltblown Nonwovens to Improve Acoustic Properties

COATINGS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Experimental and Simulation Studies on Nonwoven Polypropylene- Nitrile Rubber Blend: Recycling of Medical Face Masks to an Engineering Product

George P. J. Varghese et al.

Summary: A novel method for recycling medical face masks has been studied, which involves incorporating nonwoven polypropylene fiber and acrylonitrile butadiene rubber to produce a high percentage economy PP-NBR blend. Experimental and simulation studies demonstrate the excellent thermomechanical properties of the blend.

ACS OMEGA (2022)

Add to Collection

Article Materials Science, Textiles

The selection of face mask as a personal protective equipment under the spherical fuzzy environment considering technical and material properties

Sait Gul et al.

Summary: This paper assesses the selection criteria of face masks during the pandemic era and determines that material type, cost, and bacteria-virus protection level are the most important attributes. N95 masks are considered to be the best choice.

INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Acoustics

Simultaneous negative reflection and refraction and reverse-incident right-angle collimation of sound in a solid-fluid phononic crystal

Yuqi Jin et al.

Summary: The study demonstrates various metamaterial effects using a square lattice phononic crystal (PnC), including positive and negative refraction and reflection. By shifting the equifrequency contour (EFC) away from the center of the Brillouin zone, an effectively inverted EFC is achieved, leading to multi-refringence phenomena. Additionally, strong right-angle redirection and collimation of the incident acoustic beam are achieved through the coupling of different modes. These effects are validated through numerical simulations and experiments.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2022)

Add to Collection

Review Materials Science, Textiles

High structural insulation composite material development with electromagnetic protection effect reinforced with carbon fibers and particles

Devrim D. Soyaslan

Summary: The composite panels developed in this study successfully provide electromagnetic, thermal, and acoustical insulation functions, achieved by adding carbon materials into the polyurethane matrix. Test results show that these panels have good electromagnetic protection efficiency, low heat transmission coefficient, and sound absorption performance.

JOURNAL OF INDUSTRIAL TEXTILES (2021)

Add to Collection

Article Materials Science, Textiles

Effect of Process Parameters on Fiber Diameter and Fiber Distribution of Melt-Blown Polypropylene Microfibers Produced by Biax Line

Numan Hoda et al.

Summary: This study focused on the effect of critical process conditions of the Biax process on the structure of meltblown webs. It was found that air pressure and melt throughput were the most effective process conditions on the fiber diameter of meltblown polypropylene webs, and fine fiber webs close to one-micron average fiber diameter could be produced under appropriate processing conditions using the Biax process.

FIBERS AND POLYMERS (2021)

Add to Collection

Article Materials Science, Textiles

Acoustical absorptive properties of meltblown nonwovens for textile machinery

Magdi El Messiry et al.

Summary: Textile industry faces noise exposure problems with sound pressure levels ranging from 95 to 130 dB, with weaving machines having the highest levels. Insulation materials can be used to reduce sound pollution at a low cost. Poly(lactic acid) meltblown nonwovens showed significant sound absorption, with samples having smaller fiber diameters exhibiting the highest damping effect.

TEXTILE RESEARCH JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Bonding and Thermal-Mechanical Property of Gradient NiCoCrAlY/YSZ Thermal Barrier Coatings with Millimeter Level Thickness

Yu Wang et al.

Summary: By using a novel synchronous dual powder feeding method, this study successfully deposited gradient NiCoCrAlY/YSZ coatings with millimeter level thickness, which exhibited improved bonding strength and thermal cycling life compared to common TBCs.

COATINGS (2021)

Add to Collection

Article Environmental Sciences

The recycling of surgical face masks as sound porous absorbers: Preliminary evaluation

Ruben Maderuelo-Sanz et al.

Summary: This study discusses the potential use of plastic surgical face masks as sound porous absorber and evaluates their acoustic efficiency through experimental research. The results show high sound absorption values in samples made from scrapped face masks, suggesting they could be a possible substitute for traditional materials.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Materials Science, Textiles

Evaluation of Enset Fabric Reinforced Green Composite as Sound Absorber Structure

Alhayat Getu Temesgen et al.

Summary: The study investigated the acoustic properties of enset fiber fabric and its green composite material, with sound absorption performance determined by impedance tube method. Results showed that increasing layers of enset fabric in the composite decreased the sound absorption frequency interval, while a higher ratio of bio resin to enset fabric shifted the sound absorption behavior towards medium frequency regions.

TEKSTIL VE KONFEKSIYON (2021)

Add to Collection

Article Materials Science, Textiles

Experimental Comfort Evaluation of Baby Diapers in Terms of Liquid Accumulation, Moisture Management and Heat Transfer via Non Destructive Testing

Caglar Sivri

Summary: This paper provides an applied and objective analysis into heat transfer and mass transfer parameters of baby diapers using Alambeta and Permetest instruments, finding changes in breathability and liquid accumulation over time, as well as the effect of diaper thickness and production type on thermal parameters.

TEKSTIL VE KONFEKSIYON (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mathematical investigation of the thermal conductivity of fabrics using thermal equation

Shariful Islam et al.

Summary: This paper aims to present various heat equations and measure the thermal conductivity of fabrics. Experimentation was conducted on cotton spandex woven fabrics with different spandex content, and thermal conductivity values were measured using heat equations. The findings of this research are practical and beneficial for personnel in textile industries involved in heat setting and measuring thermal conductivity values.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Textiles

Effect of microfiber layers on acoustical absorptive properties of nonwoven fabrics

Gajanan Bhat et al.

JOURNAL OF INDUSTRIAL TEXTILES (2020)

Add to Collection

Article Materials Science, Textiles

Analysis of the effect of fiber cross section and different bonding methods on sound absorption performance of PET fiber based nonwovens using Taguchi method

Handan Palak et al.

JOURNAL OF THE TEXTILE INSTITUTE (2020)

Add to Collection

Article Materials Science, Textiles

Sound absorption and compression properties of perpendicular-laid nonwovens

Tao Yang et al.

TEXTILE RESEARCH JOURNAL (2019)

Add to Collection

Article Physics, Applied

Analysis of Membrane Phononic Crystals with Wide Band Gaps and Low-Mass Defects

C. Reetz et al.

PHYSICAL REVIEW APPLIED (2019)

Add to Collection

Article Materials Science, Textiles

Acoustic properties of sound-absorbing polyester fabrics woven with thick staple and thin draw textured yarn for use in interior decoration

YoungA Kang et al.

JOURNAL OF THE TEXTILE INSTITUTE (2019)

Add to Collection

Article Chemistry, Applied

In-situ synthesis of silica aerogel in polyethylene terephthalate fibre nonwovens and their composite properties on acoustical absorption behavior

M. Ramamoorthy et al.

JOURNAL OF POROUS MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Insulation and mechanical properties of jute and hollow conjugated polyester reinforced nonwoven composite

G. Mohamed Zakriya et al.

ENERGY AND BUILDINGS (2018)

Add to Collection

Review Materials Science, Composites

Porous materials for sound absorption

Leitao Cao et al.

COMPOSITES COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Textiles

Nanofiber-enhanced lightweight composite textiles for acoustic applications

Merve Kucukali-Ozturk et al.

JOURNAL OF INDUSTRIAL TEXTILES (2017)

Add to Collection

Article Materials Science, Textiles

Multi-layer fibrous structures for noise reduction

Xiaoning Tang et al.

JOURNAL OF THE TEXTILE INSTITUTE (2017)

Add to Collection

Review Engineering, Manufacturing

Acoustic energy absorption properties of fibrous materials: A review

Xiaoning Tang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Materials Science, Textiles

Development of acoustic nonwoven materials from kapok and milkweed fibres

P. Ganesan et al.

JOURNAL OF THE TEXTILE INSTITUTE (2016)

Add to Collection

Article Materials Science, Textiles

Effects of pore structure on sound absorption of kapok-based fiber nonwoven fabrics at low frequency

Xueting Liu et al.

TEXTILE RESEARCH JOURNAL (2016)

Add to Collection

Article Energy & Fuels

Innovative mineral fiber insulation panels for buildings: Thermal and acoustic characterization

Elisa Moretti et al.

APPLIED ENERGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

An investigation into sound transmission loss by polypropylene needle-punched nonwovens

Kazem Ghorbani et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Add to Collection

Article Construction & Building Technology

Acoustic characterization of natural fibers for sound absorption applications

Umberto Berardi et al.

BUILDING AND ENVIRONMENT (2015)

Add to Collection

Article Nanoscience & Nanotechnology

A Sound Absorptive Element Comprising an Acoustic Resonance Nanofibrous Membrane

Klara Kalinova

RECENT PATENTS ON NANOTECHNOLOGY (2015)

Add to Collection

Article Audiology & Speech-Language Pathology

Noise pollution and annoyance: An urban soundscapes study

Karina Mary de Paiva Vianna et al.

NOISE & HEALTH (2015)

Add to Collection

Article Engineering, Chemical

Manufacturing of PAN or PU Nanofiber Layers/PET Nonwoven Composite as Highly Effective Sound Absorbers

Amir Rabbi et al.

ADVANCES IN POLYMER TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Textiles

SOUND ABSORPTION PROPERTY OF NONWOVEN BASED COMPOSITES

Eulalia Gliscinska et al.

AUTEX RESEARCH JOURNAL (2013)

Add to Collection

Article Thermodynamics

Newton's law of cooling and its interpretation

Michael I. Davidzon

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Article Materials Science, Textiles

The effect of physical parameters on sound absorption properties of natural fiber mixed nonwoven composites

Merve Kucuk et al.

TEXTILE RESEARCH JOURNAL (2012)

Add to Collection

Article Polymer Science

SOUND ABSORPTION BEHAVIOR OF ELECTROSPUN POLYACRYLONITRILE NANOFIBROUS MEMBRANES

Hai-fan Xiang et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2011)

Add to Collection

Article Polymer Science

Effects of Porosity, Fiber Size, and Layering Sequence on Sound Absorption Performance of Needle-Punched Nonwovens

Nazire Deniz Yilmaz et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection

Article Clinical Neurology

The Influence of Hearing Impairment on Sleep Quality Among Workers Exposed to Harmful Noise

Tsafnat Test et al.

SLEEP (2011)

Add to Collection

Article Materials Science, Textiles

Sound absorption coefficients of micro-fiber fabrics by reverberation room method

Youngjoo Na et al.

TEXTILE RESEARCH JOURNAL (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.