Related references
Note: Only part of the references are listed.A multi-constraint failure-pursuing sampling method for reliability-based design optimization using adaptive Kriging
Xiaoke Li et al.
ENGINEERING WITH COMPUTERS (2022)
Degradation identification and prognostics of proton exchange membrane fuel cell under dynamic load
Meiling Yue et al.
CONTROL ENGINEERING PRACTICE (2022)
Liquid transport in gas diffusion layer of proton exchange membrane fuel cells: Effects of microporous layer cracks
Xin Shi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Deep learning-based optimization of a microfluidic membraneless fuel cell for maximum power density via data-driven three-dimensional multiphysics simulation
Dang Dinh Nguyen et al.
BIORESOURCE TECHNOLOGY (2022)
Progress in modeling of electrical discharge machining process
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)
Bubble Behavior and Its Effect on Surface Integrity in Laser-Induced Plasma Micro-Machining Silicon Wafer
Zhen Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)
The Anisotropic Electrochemical Machinability of Laser Cladding Deposited Ti6Al4V Alloy in NaCl Solution
Jiaqiang Li et al.
MATERIALS (2022)
Development of a Hybrid Intelligent Process Model for Micro-Electro Discharge Machining Using the TTM-MDS and Gaussian Process Regression
Yanyan Chen et al.
MICROMACHINES (2022)
Molecular Dynamics Study of Laser Interaction with Nanoparticles in Liquids and Its Potential Application
Hao Huang et al.
NANOMATERIALS (2022)
Comparison of state-of-the-art machine learning algorithms and data-driven optimization methods for mitigating nitrogen crossover in PEM fuel cells
Jiankang Wang et al.
CHEMICAL ENGINEERING JOURNAL (2022)
A review: The detection of cancer cells in histopathology based on machine vision
Wenbin He et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2022)
Genome-wide mapping of somatic mutation rates uncovers drivers of cancer
Maxwell A. Sherman et al.
NATURE BIOTECHNOLOGY (2022)
Limit state Kriging modeling for reliability-based design optimization through classification uncertainty quantification
Xiaoke Li et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)
Diverse morphological study for nonmetal-doped g-C3N4 composites with narrow bandgap for improved photocatalytic activity
Asif Hussain et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2022)
Towards the understanding of transport limitations in a proton-exchange membrane fuel cell catalyst layer: Performing agglomerate scale direct numerical simulations on electron-microscopy-based geometries
M. Barreiros Salvado et al.
JOURNAL OF POWER SOURCES (2021)
Evolution of atomic-scale dispersion of FeNx in hierarchically porous 3D air electrode to boost the interfacial electrocatalysis of oxygen reduction in PEMFC
Xiaogang Fu et al.
NANO ENERGY (2021)
A critical review for machining positioning based on computer vision
Wenbin He et al.
MEASUREMENT (2021)
Three-dimensional numerical simulation of full-scale proton exchange membrane fuel cells at high current densities
Takayuki Tsukamoto et al.
JOURNAL OF POWER SOURCES (2021)
Deep learning from three-dimensional multiphysics simulation in operational optimization and control of polymer electrolyte membrane fuel cell for maximum power
Pengjie Tian et al.
APPLIED ENERGY (2021)
Survey of Mura Defect Detection in Liquid Crystal Displays Based on Machine Vision
Wuyi Ming et al.
CRYSTALS (2021)
Critical review on sustainable techniques in electrical discharge machining
Wuyi Ming et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Machine Learning Applications of Two-Phase Flow Data in Polymer Electrolyte Fuel Cell Reactant Channels
Anthony D. Santamaria et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Insights on the Influence of Surface Chemistry and Rim Zone Microstructure of 42CrMo4 on the Efficiency of ECM
Alexander Schupp et al.
MATERIALS (2021)
A sensor of liquid methanol for direct methanol fuel cells
Guangjun Dai et al.
ANALYTICA CHIMICA ACTA (2021)
Highly accurate protein structure prediction with AlphaFold
John Jumper et al.
NATURE (2021)
Progress in Non-Traditional Processing for Fabricating Superhydrophobic Surfaces
Dili Shen et al.
MICROMACHINES (2021)
Review: Application of Convolutional Neural Network in Defect Detection of 3C Products
Wuyi Ming et al.
IEEE ACCESS (2021)
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Yuqing Guo et al.
ELECTROCHEMICAL ENERGY REVIEWS (2021)
Effects of surface wettability on two-phase flow in the compressed gas diffusion layer microstructures
Xia Zhou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Recent developments in catalyst -related PEM fuel cell durability
Rodney L. Borup et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2020)
Performance prediction and power density maximization of a proton exchange membrane fuel cell based on deep belief network
Hong-Wei Li et al.
JOURNAL OF POWER SOURCES (2020)
Two-phase flow characterization in PEM fuel cells using machine learning
Vedang Chauhan et al.
ENERGY REPORTS (2020)
PEMFC IDENTIFICATION USING DEEP LEARNING DEVELOPED BY IMPROVED DEER HUNTING OPTIMIZATION ALGORITHM
Zili Yin et al.
INTERNATIONAL JOURNAL OF POWER AND ENERGY SYSTEMS (2020)
Water channel morphology of non-perfluorinated hydrocarbon proton exchange membrane under a low humidifying condition
Chi Hoon Park et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Modeling of PEM fuel cell with thin MEA under low humidity operating condition
Yubai Li et al.
APPLIED ENERGY (2019)
Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances
Seyed Ali Atyabi et al.
ENERGY (2019)
Comprehensive analytical model for polarization curve of a PEM fuel cell and experimental validation
Aniket U. Thosar et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Two-phase flow in compressed gas diffusion layer: Finite element and volume of fluid modeling
Xia Zhou et al.
JOURNAL OF POWER SOURCES (2019)
Numerical simulations of two-phase flow in a proton-exchange membrane fuel cell based on the generalized design method
Chaoling Han et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)
Multidimensional nanostructured membrane electrode assemblies for proton exchange membrane fuel cell applications
Guoliang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Exergetic Simulation and Performance Analysis of the Effect of Flow Patterns in PEMFCs
S. O. Mert et al.
INTERNATIONAL JOURNAL OF THERMODYNAMICS (2019)
g-C3N4 promoted MOF derived hollow carbon nanopolyhedra doped with high density/fraction of single Fe atoms as an ultra-high performance non-precious catalyst towards acidic ORR and PEM fuel cells
Yijie Deng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Proton conduction of fuel cell polymer membranes: Molecular dynamics simulation
Zhonghao Rao et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Communication Water induced phase segregation in hydrocarbon proton exchange membranes
Kangjie Lyu et al.
JOURNAL OF ENERGY CHEMISTRY (2018)
Modelling and validation of Proton exchange membrane fuel cell (PEMFC)
A. K. M. Mohiuddin et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017) (2018)
Degradation Prediction of PEM Fuel Cell Stack Based on Multiphysical Aging Model With Particle Filter Approach
Daming Zhou et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)
Modeling and simulation of a proton exchange membrane fuel cell using computational fluid dynamics
Marjan Haghayegh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Computer simulation to investigate proton transport and conductivity in perfluorosulfonate ionomeric membrane
Chung Chieh Tai et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Molecular dynamics simulation of radiation grafted FEP films as proton exchange membranes: Effects of the side chain length
Xue Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Multi-scale structural analysis of gas diffusion layers
Martin Goebel et al.
JOURNAL OF POWER SOURCES (2017)
Atomic layer deposited tantalum oxide to anchor Pt/C for a highly stable catalyst in PEMFCs
Zhongxin Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Numerical simulation of the performance of proton exchange membrane fuel cell with different membrane geometries
Mohammed Jourdani et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2017)
Proton mobility and thermal conductivities of fuel cell polymer membranes: Molecular dynamics simulation
Chenyang Zheng et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Analysis of Catalyst Layer Microstructures: From Imaging to Performance
M. Sabharwal et al.
FUEL CELLS (2016)
A comprehensive review of PBI-based high temperature PEM fuel cells
Samuel Simon Araya et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Power density optimization of PEMFC cathode with non-uniform catalyst layer by Simplex method and numerical simulation
Sasan Ebrahimi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Modeling and sensitivity analysis of high temperature PEM fuel cells by using Comsol Multiphysics
Berna Sezgin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Microscale characterisation of stochastically reconstructed carbon fiber-based Gas Diffusion Layers; effects of anisotropy and resin content
Andreas G. Yiotis et al.
JOURNAL OF POWER SOURCES (2016)
Advanced control of liquid water region in diffusion media of polymer electrolyte fuel cells through a dimensionless number
Yun Wang et al.
JOURNAL OF POWER SOURCES (2016)
Readily processed protonic ceramic fuel cells with high performance at low temperatures
Chuancheng Duan et al.
SCIENCE (2015)
Investigation of the removing process of cathode material in micro-EDM using an atomistic-continuum model
Jianwen Guo et al.
APPLIED SURFACE SCIENCE (2014)
Carbon as catalyst and support for electrochemical energy conversion
Panagiotis Trogadas et al.
CARBON (2014)
Effect of different fuel options on performance of high-temperature PEMFC (proton exchange membrane fuel cell) systems
Suthida Authayanun et al.
ENERGY (2014)
From molecular dynamics to Brownian dynamics
Radek Erban
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Tuning Nanoparticle Catalysis for the Oxygen Reduction Reaction
Shaojun Guo et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Gas diffusion layer deformation and its effect on the transport characteristics and performance of proton exchange membrane fuel cell
Yibo Zhou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) - A review
Amrit Chandan et al.
JOURNAL OF POWER SOURCES (2013)
A simplified approach to modeling of dual-layer ammonia slip catalysts
Massimo Colombo et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Influence of ionomer content on the proton conduction and oxygen transport in the carbon-supported catalyst layers in DMFC
Xinsheng Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
3D modeling of a 200 cm2 HT-PEFC short stack
Mirko Kvesic et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review
A. P. Manso et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Electrocatalyst approaches and challenges for automotive fuel cells
Mark K. Debe
NATURE (2012)
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
Yun Wang et al.
APPLIED ENERGY (2011)
Noncarbon Support Materials for Polymer Electrolyte Membrane Fuel Cell Electrocatalysts
Yan-Jie Wang et al.
CHEMICAL REVIEWS (2011)
Analysis of the particle swarm algorithm in the optimization of a three-phase slurry catalytic reactor
Adriano Pinto Mariano et al.
COMPUTERS & CHEMICAL ENGINEERING (2011)
Prediction and analysis of the cathode catalyst layer performance of proton exchange membrane fuel cells using artificial neural network and statistical methods
N. Khajeh-Hosseini-Dalasm et al.
JOURNAL OF POWER SOURCES (2011)
Three-Level Model of a Surface Catalytic Reaction over a Platinum Catalyst
L. L. Tovazhnyanskii et al.
THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING (2011)
Experimental Study of Assembly Clamping Pressure on Performance of PEM Fuel Cells
Leping Wang et al.
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4 (2011)
An adaptive FE-MD model coupling approach
Wenzhe Shan et al.
COMPUTATIONAL MECHANICS (2010)
Polarization curve of partially degraded catalyst layer
A. A. Kulikovsky
ELECTROCHEMISTRY COMMUNICATIONS (2010)
Optimization of a Three-Phase Catalytic Slurry Reactor Using Reduced Statistical Models
Delba Nisi Cosme Melo et al.
International Journal of Chemical Reactor Engineering (2010)
Three-dimensional CFD modelling of PEM fuel cells: An investigation into the effects of water flooding
J. E. Dawes et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Durability and characterization studies of polymer electrolyte membrane fuel cell's coated aluminum bipolar plates and membrane electrode assembly
Y. Hung et al.
JOURNAL OF POWER SOURCES (2009)
Study of the distribution of air flow in a proton exchange membrane fuel cell stack
Radu Mustata et al.
JOURNAL OF POWER SOURCES (2009)
A Computational Analysis of Multiphase Flow Through PEMFC Cathode Porous Media Using the Multifluid Approach
Torsten Berning et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Microscale and macroscale aspects of water management challenges in PEM fuel cells
Satish G. Kandlikar
HEAT TRANSFER ENGINEERING (2008)
Effect of anisotropic electrical resistivity of gas diffusion layers (GDLs) on current density and temperature distribution in a Polymer Electrolyte Membrane (PEM) fuel cell
Chaitanya J. Bapat et al.
JOURNAL OF POWER SOURCES (2008)
An approach to modeling two-phase transport in the gas diffusion layer of a proton exchange membrane fuel cell
Tetsuya Koido et al.
JOURNAL OF POWER SOURCES (2008)
Effect of platinum amount in carbon supported platinum catalyst on performance of polymer electrolyte membrane fuel cell
Yong-Hun Cho et al.
JOURNAL OF POWER SOURCES (2007)
Three-dimensional simulation of liquid water distribution in a PEMFC with experimentally measured capillary functions
Qiang Ye et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Effect of carbon loading in microporous layer on PEM fuel cell performance
Sehkyu Park et al.
JOURNAL OF POWER SOURCES (2006)
Temperature distribution on the MEA surface of a PEMFC with serpentine channel flow bed
Maohai Wang et al.
JOURNAL OF POWER SOURCES (2006)
Thin film temperature sensor for real-time measurement of electrolyte temperature in a polymer electrolyte fuel cell
SH He et al.
SENSORS AND ACTUATORS A-PHYSICAL (2006)
Mathematical modelling of heat transfer in a catalytic reformer
A Selsil et al.
IMA JOURNAL OF APPLIED MATHEMATICS (2005)
Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media
U Pasaogullari et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Model of two-phase flow and flooding dynamics in polymer electrolyte fuel cells
H Meng et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Thermal conductivities from temperature profiles in the polymer electrolyte fuel cell
PJS Vie et al.
ELECTROCHIMICA ACTA (2004)
Optimum Nafion content in PEM fuel cell electrodes
G Sasikumar et al.
ELECTROCHIMICA ACTA (2004)
Recent developments in polymer electrolyte fuel cell electrodes
E Antolini
JOURNAL OF APPLIED ELECTROCHEMISTRY (2004)
A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding
A Hakenjos et al.
JOURNAL OF POWER SOURCES (2004)
Electrode permeability and flow-field configuration:: influence on the performance of a PEMFC
J Soler et al.
JOURNAL OF POWER SOURCES (2003)
Rigorous 3-d mathematical modeling of PEM fuel cells - I. Model predictions without liquid water transport
S Mazumder et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Improvement of water management by a microporous sublayer for PEM fuel cells
ZG Qi et al.
JOURNAL OF POWER SOURCES (2002)
Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method
JM Song et al.
JOURNAL OF POWER SOURCES (2001)
Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance
E Passalacqua et al.
ELECTROCHIMICA ACTA (2001)
Numerical prediction of temperature distribution in PEM fuel cells
S Shimpalee et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2000)