Related references
Note: Only part of the references are listed.Creep performance of carburized 316H stainless steel at 550 °C
J. Eaton-Mckay et al.
JOURNAL OF NUCLEAR MATERIALS (2022)
Structure and Properties of Gas-Nitrided, Precipitation-Hardened Martensitic Stainless Steel
Pawel Kochmanski et al.
MATERIALS (2022)
The Expanded Phases in the Low-Temperature Treated Stainless Steels: A Review
Francesca Borgioli
METALS (2022)
Anodization of medical grade stainless steel for improved corrosion resistance and nanostructure formation targeting biomedical applications
Indika Herath et al.
ELECTROCHIMICA ACTA (2022)
Influence of the compound layer on the rolling contact fatigue properties of nitrided medium-carbon steel at the elevated temperature
Guanghong Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties
Andac Ozsoy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
The influence of the plasma-nitriding temperature on the microstructure evolution and surface properties of additive-manufactured 18Ni300 maraging steel
Matjaz Godec et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Laser powder bed fusion of ultra-high-strength 420 stainless steel: Microstructure characterization, texture evolution and mechanical properties
Yuan Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients
S. C. Bodner et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Effect of precipitates on hardening of 17-4PH martensitic stainless steel serviced at 300 °C in nuclear power plant
Bing Bai et al.
ANNALS OF NUCLEAR ENERGY (2021)
Laser Defocusing Effect on the Microstructure and Defects of 17-4PH Parts Additively Manufactured by SLM at a Low Energy Input
Paola Leo et al.
METALS (2021)
The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel
Qi Chao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructure evolution and wear behaviour of VN strengthened 17-4PH stainless steel fabricated by metal injection molding
Lin Liu et al.
PHILOSOPHICAL MAGAZINE (2021)
Corrosion Protection of Injection Molded Porous 440C Stainless Steel by Electroplated Zinc Coating
Matti Kultamaa et al.
COATINGS (2021)
Influence of Niobium Addition on Microstructure and Machinability of High Chromium Cast Iron
Anderson Edson da Silva et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2021)
Microstructural characterization of aging precipitation behavior of 17Cr-0.86Si-1.2Cu-0.5Nb ferritic stainless steel
Mingkun Jiang et al.
MATERIALS CHARACTERIZATION (2021)
A Novel Design to Enhance the Mechanical Properties in Cu-Bearing Antibacterial Stainless Steel
Shaoheng Sun et al.
MATERIALS (2020)
Failure analysis of AISI 316L ball valves by salt bath nitriding
Guandong Luo et al.
ENGINEERING FAILURE ANALYSIS (2020)
Microstructure, Tribological Properties and Corrosion Behaviour of Additively Manufactured 17-4PH Stainless Steel: Effects of Scanning Pattern, Build Orientation, and Single vs. Double scan
H. R. Lashgari et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Cu Precipitation Behaviors and Microscopic Mechanical Characteristics of a Novel Ultra-Low Carbon Steel
Mingxue Sun et al.
MATERIALS (2020)
Influence of Time on Low Temperature Salt Bath Nitriding and its Corrosion Behavior of 316L ASS in PEMFC Environment
Vipin Tandon et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2020)
Wear resistance of graphenic-nickel composite coating on austenitic stainless steel
H. M. Hdz-Garcia et al.
MATERIALS LETTERS (2020)
Microstructure and Wear Behaviour of 17-4 Precipitation Hardening Stainless Steel with Various Ti Content
Dursun Ozyurek et al.
POWDER METALLURGY AND METAL CERAMICS (2020)
Wear and corrosion behavior of P20 steel surface modified by gas nitriding with laser surface engineering
Guanghua Yan et al.
APPLIED SURFACE SCIENCE (2020)
Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN-Coated Tool Steels
Yin-Yu Chang et al.
MATERIALS (2019)
Mechanical properties and microstructural stability of CuTa/Cu composite coatings
Amin Bahrami et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of ionic plasma nitriding process on the corrosion and micro-abrasive wear behavior of AISI 316L austenitic and AISI 470 super-ferritic stainless steels
Elieser de Araujo Junior et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
The effect of η-Ni3Ti precipitates and reversed austenite on the passive film stability of nickel-rich Custom 465 steel
Li Wang et al.
CORROSION SCIENCE (2019)
Wire plus Arc Additive Manufacture of 17-4 PH stainless steel: Effect of different processing conditions on microstructure, hardness, and tensile strength
Armando Caballero et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4 PH stainless steel
Tzu-Hou Hsu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
Joamin Gonzalez-Gutierrez et al.
MATERIALS LETTERS (2019)
Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings
Amin Bahrami et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Multipass and reciprocating microwear study of TiN based films
R. C. Moron et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Tribological behavior of 17-4 PH stainless steel fabricated by traditional manufacturing and laser-based additive manufacturing methods
K. C. Sanjeev et al.
WEAR (2019)
Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel
Zemin Wang et al.
ACTA MATERIALIA (2018)
Factors controlling ambient and high temperature yield strength of ferritic stainless steel susceptible to intermetallic phase formation
Timo Juuti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A comparative investigation of the corrosion and tribocorrosion behaviour of nitrocarburized, gas nitrided, fluidized-bed nitrided, and plasma nitrided plastic mould steel
E. Bortepe et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Compositional and Tribo-Mechanical Characterization of Ti-Ta Coatings Prepared by Confocal Dual Magnetron Co-Sputtering
Amin Bahrami et al.
ADVANCED ENGINEERING MATERIALS (2018)
Influence of simultaneous aging and plasma nitriding on fatigue performance of 17-4 PH stainless steel
Hamidreza Riazi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
Mohamad Mahmoudi et al.
RAPID PROTOTYPING JOURNAL (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Effect of scan pattern on the microstructure and mechanical properties of Powder Bed Fusion additive manufactured 17-4 stainless steel
Andelle Kudzal et al.
MATERIALS & DESIGN (2017)
Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study
Tong Xi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Low temperature active screen plasma nitriding of 17-4 PH stainless steel
Carlos Eduardo Pinedo et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
Bandar AlMangour et al.
MATERIALS & DESIGN (2016)
The Effects of Casting Porosity on the Tensile Behavior of Investment Cast 17-4PH Stainless Steel
D. F. Susan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Surface modification of 2205 duplex stainless steel by low temperature salt bath nitrocarburizing at 430 °C
Runbo Huang et al.
APPLIED SURFACE SCIENCE (2013)
Effects of the Treating Time on Microstructure and Erosion Corrosion Behavior of Salt-Bath-Nitrided 17-4PH Stainless Steel
Jun Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Effects of Temperature on Microstructure and Wear of Salt Bath Nitrided 17-4PH Stainless Steel
Jun Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Investigation on liquid bath nitriding of selected steels
E. Balikci et al.
SURFACE ENGINEERING (2011)
Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade)
Kishora Shetty et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Influence of initial heat treatment of 17-4 PH stainless steel on gas nitriding kinetics
P. Kochmanski et al.
SURFACE & COATINGS TECHNOLOGY (2008)
The corrosion and corrosion-wear behaviour of plasma nitrided 17-4PH precipitation hardening stainless steel
M. Esfandiari et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Low-temperature salt bath nitriding of steels
K Funatani
METAL SCIENCE AND HEAT TREATMENT (2004)
Plasma nitriding behavior of low carbon binary alloy steels
K Nakata et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Aluminizing and subsequent nitriding of plain carbon low alloy steels for piston ring applications
PN Bindumadhavan et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Share Paper
