Related references
Note: Only part of the references are listed.Enhanced structural, electrical, mechanical properties and antibacterial activity of Cs/PEO doped mixed nanoparticles (Ag/TiO2) for food packaging applications
M. M. Abutalib et al.
POLYMER TESTING (2021)
Effect of lattice structure evolution on the thermal and mechanical properties of Cu-Al2O3/GNPs nanocomposites
Abdulrahman Khamaj et al.
CERAMICS INTERNATIONAL (2021)
Rare earth metal oxide-doped reduced graphene-oxide nanocomposite as binder-free hybrid electrode material for supercapacitor application
M. Muthuselvi et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)
A systematic study on the synergistic effects of MWCNTs and core-shell particles on the physicomechanical properties of epoxy resin
Ali Gharieh et al.
SCIENTIFIC REPORTS (2021)
Effect of ZnO Nanoparticle Content on the Structural and Ionic Transport Parameters of Polyvinyl Alcohol Based Proton-Conducting Polymer Electrolyte Membranes
Omed Gh Abdullah et al.
MEMBRANES (2021)
Development, thermal and dielectric investigations of PVDF-Y2O3 polymer nanocomposite films
T. A. Taha et al.
JOURNAL OF POLYMER RESEARCH (2021)
Flexural Strength and Hardness of Filler-Reinforced PMMA Targeted for Denture Base Application
Abdulaziz Alhotan et al.
MATERIALS (2021)
Recent Advances in Boron Nitride Based Hybrid Polymer Nanocomposites
Asok Aparna et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2021)
Synthesis of the SWCNTs/TiO2 nanostructure and its effect study on the thermal, optical, and conductivity properties of the CMC/PEO blend
Qana A. Alsulami et al.
RESULTS IN PHYSICS (2021)
Review on nanocomposites based on aerospace applications
Aayush Bhat et al.
NANOTECHNOLOGY REVIEWS (2021)
Dynamic Mechanical Properties and Free Vibration Characteristics of Surface Modified Jute Fiber/Nano-Clay Reinforced Epoxy Composites
S. Ramakrishnan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)
Preparation and characterization of polyaniline/sodium alginate-doped TiO2 nanoparticles with promising mechanical and electrical properties and antimicrobial activity for food packaging applications
M. M. Abutalib et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Correlation between grain boundary evolution and mechanical properties of ultrafine-grained metals
Mohamed Shaat et al.
MECHANICS OF MATERIALS (2020)
Preparation of Fe3O4@TiO2 blended PVDF membrane by magnetic coagulation bath and its permeability and pollution resistance
Jian Sun et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Co doped ZnO reinforced PEMA/PMMA composite: Structural, thermal, dielectric and electrical properties for electrochemical applications
A. Rajeh et al.
JOURNAL OF MOLECULAR STRUCTURE (2020)
A Comparative Study on Structural, Morphological, and Tensile Properties of Binary and Ternary Epoxy Resin-Based Polymer Nanocomposites
Dalia M. T. Mustafa et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)
Mechanical properties of amine-cured epoxy composites reinforced with pristine protonated titanate nanotubes
Alex Tamayo-Aguilar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Structural and optical properties of zirconium oxide (ZrO2) nanoparticles: effect of calcination temperature
N. C. Horti et al.
NANO EXPRESS (2020)
Molecular-level dispersion of rigid-rod sulfonated aromatic polyamides in epoxy resin for extraordinary improvement in both strength and toughness
Guodong Zhou et al.
POLYMER (2019)
Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite
Ahmed Abu-Oqail et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The dependence of accumulative roll bonded copper mechanical properties on grain sub-division, stacking faults, and lattice strains
Ahmed Wagih et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Imidazole-supported silica one-pot processed nanoparticles to enhance toughness of epoxy based nanocomposites
Tankeshwar Prasad et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Dramatically enhanced tensile strength and impact toughness of polydicyclopentadiene composites by covalent bond formation between phenyl-functionalized silica and dicyclopentadiene
Zhi-Long He et al.
COMPOSITES PART B-ENGINEERING (2019)
Developing an epoxy resin with high toughness for grouting material via co-polymerization method
Xiongfei Zhang et al.
E-POLYMERS (2019)
Enhanced Thermal Properties of Zirconia Nanoparticles and Chitosan-Based Intumescent Flame Retardant Coatings
Tentu Nageswara Rao et al.
APPLIED SCIENCES-BASEL (2019)
An insight into the effect of zinc oxide nanoparticles on the structural, thermal, mechanical properties and antimicrobial activity of Cs/PVA composite
A. M. Hezma et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)
Study of Hybrid Nanoparticles Modified Epoxy Resin Used in Filament Winding Composite
Chengrui Di et al.
MATERIALS (2019)
(Bio)polymer/ZnO Nanocomposites for Packaging Applications: A Review of Gas Barrier and Mechanical Properties
Mohsin Abbas et al.
NANOMATERIALS (2019)
Synthesis of very-fine PbS nanoparticles dispersed homogeneously in MC matrix: effect of concentration on the structural and optical properties of host polymer
Azhin H. Mohamad et al.
MATERIALS RESEARCH EXPRESS (2019)
Development of a supramolecular accelerator simultaneously to increase the cross-linking density and ductility of an epoxy resin
Jiae Seo et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Adhesion of Epoxy Resin with Hexagonal Boron Nitride and Graphite
Yuta Tsuji et al.
ACS OMEGA (2019)
Toughening of Petroleum Based (DGEBA) Epoxy Resins with Various Renewable Resources Based Flexible Chains for High Performance Applications: A Review
Sudheer Kumar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Highly crosslinked and uniform thermoset epoxy microspheres: Preparation and toughening study
Xiao Wu et al.
POLYMER (2018)
Improved mechanical and wear properties of hybrid Al-Al2O3/GNPs electro-less coated Ni nanocomposite
A. Fathy et al.
CERAMICS INTERNATIONAL (2018)
Remarkable Improvement in the Mechanical Properties of Epoxy Composites Achieved by a Small Amount of Modified Helical Carbon Nanotubes
Nabil Kadhim et al.
POLYMERS (2018)
Experimental fracture study of MWCNT/epoxy nanocomposites under the combined out-of-plane shear and tensile loading
Behnam Saboori et al.
POLYMER TESTING (2017)
Toughening mechanisms of rubber modified thin film epoxy resins: Part 2-Study of abrasion, thermal and corrosion resistance
Hossein Yahyaei et al.
PROGRESS IN ORGANIC COATINGS (2017)
Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content
Nadiim Domun et al.
NANOCOMPOSITES (2017)
Enhancement of Fracture Toughness of Epoxy Nanocomposites by Combining Nanotubes and Nanosheets as Fillers
Nadiim Domun et al.
MATERIALS (2017)
Improvement of modulus, strength and fracture toughness of CNT/Epoxy nanocomposites through the functionalization of carbon nanotubes
Jaemin Cha et al.
COMPOSITES PART B-ENGINEERING (2017)
Comparative study of graphene nanoparticle and multiwall carbon nanotube filled epoxy nanocomposites based on mechanical, thermal and dielectric properties
Muhammad Razlan Zakaria et al.
COMPOSITES PART B-ENGINEERING (2017)
Structural, optical and dielectric properties of ZrO2 reinforced polymeric nanocomposite films of polymethylmethacrylate (PMMA)
P. Maji et al.
OPTIK (2016)
Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites
Conor S. Boland et al.
SCIENCE (2016)
An overview of multifunctional epoxy nanocomposites
Hongbo Gu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content Based on In Situ Ball Milling
Ying Liu et al.
POLYMER COMPOSITES (2016)
Mechanical properties of epoxy nanocomposites using titanium dioxide as reinforcement - A review
Deesy Pinto et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Improving the fracture toughness and the strength of epoxy using nanomaterials - a review of the current status
N. Domun et al.
NANOSCALE (2015)
Enhanced thermal and mechanical properties of epoxy composites by mixing thermotropic liquid crystalline epoxy grafted graphene oxide
B. Qi et al.
EXPRESS POLYMER LETTERS (2014)
Synthesis and Characterization of Y2O3 Powders by a Modified Solvothermal Process
Kwang-Jin Jeong et al.
KOREAN JOURNAL OF MATERIALS RESEARCH (2012)
Effect of ZnO nanoparticles on the thermal and mechanical properties of epoxy-based nanocomposite
B. Ramezanzadeh et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2011)
Morphology, X-ray Diffraction and Mechanical Properties of Resol-montmorillonite Clay Composites
Anupama Kaushik et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2010)
Nanoparticle Aggregation: Challenges to Understanding Transport and Reactivity in the Environment
Ernest M. Hotze et al.
JOURNAL OF ENVIRONMENTAL QUALITY (2010)
The effects of alumina nanoparticle on the properties of an epoxy resin system
Abdollah Omrani et al.
MATERIALS CHEMISTRY AND PHYSICS (2009)
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites
Shao-Yun Fu et al.
COMPOSITES PART B-ENGINEERING (2008)
Highly dispersed nanosilica-epoxy resins with enhanced mechanical properties
Chenggang Chen et al.
POLYMER (2008)
Aggregation of colloidal nanoparticles in polymer matrices
J Oberdisse
SOFT MATTER (2006)
The structural characterization and properties of SiO2-epoxy nanocomposites
XF Yao et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Study of SiO2 nanoparticles on the improved performance of epoxy and fiber composites
YP Zheng et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
Clay-reinforced epoxy nanocomposites
D Ratna et al.
POLYMER INTERNATIONAL (2003)