Related references
Note: Only part of the references are listed.A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics
Hong Zhang et al.
NATURE COMMUNICATIONS (2022)
Origin of Efficiency and Stability Enhancement in High-Performing Mixed Dimensional 2D-3D Perovskite Solar Cells: A Review
Md Arafat Mahmud et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Overcoming Shockley-Queisser limit using halide perovskite platform?
Kai Wang et al.
JOULE (2022)
Guanidinium-assisted crystallization modulation and reduction of open-circuit voltage deficit for efficient planar FAPbBr3 perovskite solar cells
Huifen Xu et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Utilizing Nonpolar Organic Solvents for the Deposition of Metal-Halide Perovskite Films and the Realization of Organic Semiconductor/Perovskite Composite Photovoltaics
Nakita K. Noel et al.
ACS ENERGY LETTERS (2022)
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Hanul Min et al.
NATURE (2021)
Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells
Yong Zhang et al.
ADVANCED ENERGY MATERIALS (2021)
Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture
Bowen Yang et al.
ACS ENERGY LETTERS (2021)
Solvent Engineering as a Vehicle for High Quality Thin Films of Perovskites and Their Device Fabrication
Ehsan Rezaee et al.
SMALL (2021)
Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation
Guang Yang et al.
NATURE PHOTONICS (2021)
Comparison of surface-passivation ability of the BAI salt and its induced 2D perovskite for high-performance inverted perovskite solar cells
Hanhong Zhang et al.
RSC ADVANCES (2021)
Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells
Abd. Rashid bin Mohd Yusoff et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
Double-Sided Surface Passivation of 3D Perovskite Film for High-Efficiency Mixed-Dimensional Perovskite Solar Cells
Md Arafat Mahmud et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
2D/3D Heterostructure for Semitransparent Perovskite Solar Cells with Engineered Bandgap Enables Efficiencies Exceeding 25% in Four-Terminal Tandems with Silicon and CIGS
Saba Gharibzadeh et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Stabilization of Highly Efficient and Stable Phase-Pure FAPbI3Perovskite Solar Cells by Molecularly Tailored 2D-Overlayers
Yuhang Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Efficiency improvement of flexible Sb2Se3 solar cells with non-toxic buffer layer via interface engineering
Chong Wang et al.
NANO ENERGY (2020)
Organic N-Type Molecule: Managing the Electronic States of Bulk Perovskite for High-Performance Photovoltaics
Haiyang Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Multifunctional Polymer-Regulated SnO2Nanocrystals Enhance Interface Contact for Efficient and Stable Planar Perovskite Solar Cells
Shuai You et al.
ADVANCED MATERIALS (2020)
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Amran Al-Ashouri et al.
SCIENCE (2020)
Flexible semitransparent perovskite solar cells with gradient energy levels enable efficient tandems with Cu(In,Ga)Se2
Sheng Li et al.
NANO ENERGY (2020)
High-Performance Inverted Perovskite Solar Cells with Operational Stability via n-Type Small Molecule Additive-Assisted Defect Passivation
Donghwan Koo et al.
ADVANCED ENERGY MATERIALS (2020)
Defect and Contact Passivation for Perovskite Solar Cells
Erkan Aydin et al.
ADVANCED MATERIALS (2019)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Achieving a high open-circuit voltage in inverted wide-bandgap perovskite solar cells with a graded perovskite homojunction
Cong Chen et al.
NANO ENERGY (2019)
Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%
Yuhang Liu et al.
SCIENCE ADVANCES (2019)
Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells
Hyeonwoo Kim et al.
ADVANCED ENERGY MATERIALS (2019)
Reducing Saturation-Current Density to Realize High-Efficiency Low-Bandgap Mixed Tin-Lead Halide Perovskite Solar Cells
Chongwen Li et al.
ADVANCED ENERGY MATERIALS (2019)
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Dong Hoe Kim et al.
JOULE (2019)
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Jason J. Yoo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Stabilizing the Efficiency Beyond 20% with a Mixed Cation Perovskite Solar Cell Fabricated in Ambient Air under Controlled Humidity
Trilok Singh et al.
ADVANCED ENERGY MATERIALS (2018)
Mechanically-stacked perovskite/CIGS tandem solar cells with efficiency of 23.9% and reduced oxygen sensitivity
Heping Shen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Frontiers, opportunities, and challenges in perovskite solar cells: A critical review
Mohammed Istafaul Haque Ansari et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2018)
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Deying Luo et al.
SCIENCE (2018)
Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniques
Rebekah L. Garris et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
A Green Anti-Solvent Process for High Performance Carbon-Based CsPbI2Br All-Inorganic Perovskite Solar Cell
Chen Dong et al.
SOLAR RRL (2018)
Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells
Fei Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Valence Level Character in a Mixed Perovskite Material and Determination of the Valence Band Maximum from Photoelectron Spectroscopy: Variation with Photon Energy
Bertrand Philippe et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Scalable perovskite/CIGS thin-film solar module with power conversion efficiency of 17.8%
U. W. Paetzold et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Over 20% Efficient CIGS-Perovskite Tandem Solar Cells
Asim Guchhait et al.
ACS ENERGY LETTERS (2017)
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Dong Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Giles E. Eperon et al.
SCIENCE (2016)
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
David P. McMeekin et al.
SCIENCE (2016)
Microscopic Investigation of Grain Boundaries in Organolead Halide Perovskite Solar Cells
Jiang-Jun Li et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Multilayer Transparent Top Electrode for Solution Processed Perovskite/Cu(In,Ga) (Se,S)2 Four Terminal Tandem Solar Cells
Yang (Michael) Yang et al.
ACS NANO (2015)
Semi-transparent perovskite solar cells for tandems with silicon and CIGS
Colin D. Bailie et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Impact of Capacitive Effect and Ion Migration on the Hysteretic Behavior of Perovskite Solar Cells
Bo Chen et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
High-Efficiency Polycrystalline Thin Film Tandem Solar Cells
Lukas Kranz et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Recombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States
Samuel D. Stranks et al.
PHYSICAL REVIEW APPLIED (2014)