4.8 Article

Hydrazine Hydrate-Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%-Efficient Sb2(S,Se)3 Planar Solar Cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post-Treatment Enabling Sb2(S,Se)3 Solar Cells with 10.7% Efficiency

Yuqi Zhao et al.

Summary: By using a post-treatment technique, the quality of Sb-2(S,Se)(3) films was improved, leading to increased fill factor and short-circuit current density of solar cells, achieving a champion efficiency of 10.7%. This study provides an effective strategy for fabricating high-efficiency Sb-2(S,Se)(3) solar cells.

ADVANCED ENERGY MATERIALS (2022)

Article Multidisciplinary Sciences

Efficient and stable all-inorganic Sb2(S, Se)3 solar cells via manipulating energy levels in MnS hole transporting layers

Shaoying Wang et al.

Summary: In this study, an inorganic MnS film prepared by thermal evaporation was successfully demonstrated as a high-quality hole transport layer (HTL) in high-performance Sb-2(S, Se)(3) solar cells, offering a cost-effective all-inorganic solution. The optimized device achieved an impressive power conversion efficiency (PCE) of 9.24%, the highest among all-inorganic Sb-2(S, Se)(3) solar cells.

SCIENCE BULLETIN (2022)

Article Engineering, Environmental

Enhanced hydrothermal heterogeneous deposition with surfactant additives for efficient Sb2S3 solar cells

Jianzha Zheng et al.

Summary: Antimony sulfide (Sb2S3) is a promising wide-bandgap photovoltaic material with low cost, low toxicity, and stability. The addition of sodium dodecyl sulfate (SDS) as a reaction additive effectively controls the preparation of Sb2S3 and improves its quality. SDS-optimized Sb2S3 solar cells show high photovoltaic performance under indoor illumination.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Solar cell efficiency tables (version 57)

Martin Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules, including guidelines for inclusion of results and reviewing new entries since June 2020. It also includes charts showing efficiency improvements since 1993 and an updated list of recognized test centers.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Physics, Applied

Study of loss mechanisms on Sb-2(S1-xSex)(3) solar cell with n-i-p structure: Toward an efficiency promotion

F. Ayala-Mato et al.

Summary: This work presents a theoretical study on the impact of loss mechanisms on Sb-2(S1-xSex)(3) solar cells with a 10% certified world record efficiency. It is found that CdS/Sb-2(S1-xSex)(3) interface recombination is the main loss mechanism, affecting various performance parameters of the solar cells. Discussions on further promoting device efficiency are also provided.

APPLIED PHYSICS LETTERS (2021)

Article Chemistry, Physical

Zinc-based electron transport materials for over 9.6%-efficient S-rich Sb2(S,Se)3 solar cells

Yuqi Zhao et al.

Summary: A bilayer structure ETL, Zn(O,S)/CdS, was successfully prepared as a substitute for pure CdS in S-rich Sb-2(S,Se)(3) solar cells, achieving the dual goals of improved efficiency and reduced CdS usage. The fabricated photovoltaic device achieved an impressive power conversion efficiency of 9.62% and exhibited high stability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Materials Science, Multidisciplinary

Atomic Level Dispersed Metal-Nitrogen-Carbon Catalyst toward Oxygen Reduction Reaction: Synthesis Strategies and Chemical Environmental Regulation

Hengbo Yin et al.

Summary: The article discusses the application of atomically dispersed metal-nitrogen-carbon catalysts in proton exchange membrane fuel cell technology and the challenges in their preparation, pointing out the issue of inadequate structural system of the catalysts.

ENERGY & ENVIRONMENTAL MATERIALS (2021)

Article Chemistry, Physical

Manipulating the Electrical Properties of Sb2(S,Se)3Film for High-Efficiency Solar Cell

Xiaomin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Article Materials Science, Multidisciplinary

Front and Back contact engineering for high-efficient and low-cost hydrothermal derived Sb2(S, Se)3 solar cells by using FTO/SnO2 and carbon

Liquan Yao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Review Chemistry, Multidisciplinary

Synthetic routes of the reduced graphene oxide

Jianlang Feng et al.

CHEMICAL PAPERS (2020)

Article Multidisciplinary Sciences

9.2%-efficient core-shell structured antimony selenide nanorod array solar cells

Zhiqiang Li et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Lei Yan et al.

ADVANCED MATERIALS (2018)

Article Multidisciplinary Sciences

Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency

Xixing Wen et al.

NATURE COMMUNICATIONS (2018)

Review Chemistry, Applied

Development of antimony sulfide-selenide Sb2(S, Se)3-based solar cells

Xiaomin Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

Article Multidisciplinary Sciences

High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells

Qifeng Han et al.

SCIENCE (2018)

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Article Energy & Fuels

Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer

Liang Wang et al.

NATURE ENERGY (2017)

Article Chemistry, Multidisciplinary

Identifying Fundamental Limitations in Halide Perovskite Solar Cells

Wei Lin Leong et al.

ADVANCED MATERIALS (2016)

Article Engineering, Electrical & Electronic

Photodiode Based on CdO Thin Films as Electron Transport Layer

M. Soylu et al.

JOURNAL OF ELECTRONIC MATERIALS (2016)

Review Multidisciplinary Sciences

Photovoltaic materials: Present efficiencies and future challenges

Albert Polman et al.

SCIENCE (2016)

Article Chemistry, Physical

Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency

Wei Wang et al.

ADVANCED ENERGY MATERIALS (2014)

Article Materials Science, Multidisciplinary

Enhanced transparent-conducting fluorine-doped tin oxide films formed by Aerosol-Assisted Chemical Vapour Deposition

Nuruzzaman Noor et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Article Physics, Multidisciplinary

Space-charge limited photocurrent

VD Mihailetchi et al.

PHYSICAL REVIEW LETTERS (2005)

Article Chemistry, Physical

Study of the influence of annealing on the properties of CBD-CdS thin films

H El Maliki et al.

APPLIED SURFACE SCIENCE (2003)