Related references
Note: Only part of the references are listed.An injectable, self-healing, electroconductive extracellular matrix-based hydrogel for enhancing tissue repair after traumatic spinal cord injury
Yian Luo et al.
BIOACTIVE MATERIALS (2022)
Enhanced nerve cell proliferation and differentiation on electrically conductive scaffolds embedded with graphene and carbon nanotubes
Yuan Sun et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2021)
3D culturing of human adipose-derived stem cells enhances their pluripotency and differentiation abilities
Tzu-Cheng Sung et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Building three-dimensional lung models for studying pharmacokinetics of inhaled drugs
Andrei Sofia Barros et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Reduction of oral liquid controlled drugs discrepancy in day-to-day practice
Shalini Mohanasundaram et al.
INTERNATIONAL JOURNAL OF PHARMACY PRACTICE (2021)
Effects of Processing Parameters of 3D Bioprinting on the Cellular Activity of Bioinks
Jaideep Adhikari et al.
MACROMOLECULAR BIOSCIENCE (2021)
Anti-biofilm multi drug-loaded 3D printed hearing aids
Maria Vivero-Lopez et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Organs-on-chips: into the next decade
Lucie A. Low et al.
NATURE REVIEWS DRUG DISCOVERY (2021)
Peptide Hydrogel Scaffold for Mesenchymal Precursor Cells Implanted to Injured Adult Rat Spinal Cord
Tylie M. Wiseman et al.
TISSUE ENGINEERING PART A (2021)
Bioprinting: A promising approach for tissue regeneration
Fernanda Stapenhorst et al.
Bioprinting (2021)
Assembly Transformation Jointly Driven by the LAP Enzyme and GSH Boosting Theranostic Capability for Effective Tumor Therapy
Anna Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers
Gissela Constante et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Biofunctionalization of 3D-printed silicone implants with immunomodulatory hydrogels for controlling the innate immune response: An in vivo model of tracheal defect repair
J. Barthes et al.
BIOMATERIALS (2021)
Induced pluripotent stem cells for 2D and 3D modelling the biological basis of schizophrenia and screening possible therapeutics
Eva Tomaskovic-Crook et al.
BRAIN RESEARCH BULLETIN (2021)
Extruded filaments derived 3D printed medicated skin patch to mitigate destructive pulmonary tuberculosis: design to delivery
Vishal Sharad Chaudhari et al.
EXPERT OPINION ON DRUG DELIVERY (2021)
3D-printing of lopinavir printlets by selective laser sintering and quantification of crystalline fraction by XRPD-chemometric models
Rania Hamed et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment
Atabak Ghanizadeh Tabriz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
In Vitro and In Vivo Evaluation of 3D Printed Capsules with Pressure Triggered Release Mechanism for Oral Peptide Delivery
Staffan Berg et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery
Xiaoyan Xu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Stem-cell-based embryo models for fundamental research and translation
Jianping Fu et al.
NATURE MATERIALS (2021)
Is Viral Vector Gene Delivery More Effective Using Biomaterials?
Yi Wang et al.
ADVANCED HEALTHCARE MATERIALS (2021)
Heterospheroid formation improves therapeutic efficacy of mesenchymal stem cells in murine colitis through immunomodulation and epithelial regeneration
Shobha Regmi et al.
BIOMATERIALS (2021)
Axonal Organelles as Molecular Platforms for Axon Growth and Regeneration after Injury
Veselina Petrova et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
3D printed clotrimazole intravaginal ring for the treatment of recurrent vaginal candidiasis
Mattia Tiboni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Analysis of the behavior of 2D monolayers and 3D spheroid human pancreatic beta cells derived from induced pluripotent stem cells in a microfluidic environment
Amal Essaouiba et al.
JOURNAL OF BIOTECHNOLOGY (2021)
Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering
Sybele Saska et al.
POLYMERS (2021)
Bioink Formulations for Bone Tissue Regeneration
Na Li et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Selective Laser Sintering 3-Dimensional Printing as a Single Step Process to Prepare Amorphous Solid Dispersion Dosage Forms for Improved Solubility and Dissolution Rate
Daniel A. Davis et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Injectable Cell-Laden Hydrogels for Tissue Engineering: Recent Advances and Future Opportunities
Payam Zarrintaj et al.
TISSUE ENGINEERING PART A (2021)
Excipients in the Paediatric Population: A Review
Khadija Rouaz et al.
PHARMACEUTICS (2021)
Drug Safety in Translational Paediatric Research: Practical Points to Consider for Paediatric Safety Profiling and Protocol Development: A Scoping Review
Beate Aurich et al.
PHARMACEUTICS (2021)
4D Printing Dual Stimuli-Responsive Bilayer Structure Toward Multiple Shape-Shifting
Luquan Ren et al.
FRONTIERS IN MATERIALS (2021)
A State-of-the-Art of Functional Scaffolds for 3D Nervous Tissue Regeneration
Maria Grazia Tupone et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers
Laura Ruiz-Cantu et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
2D biointerfaces to study stem cell-ligand interactions
Xingzhen Zhang et al.
ACTA BIOMATERIALIA (2021)
Biomimicry in 3D printing design: implications for peripheral nerve regeneration
Zhiwen Yan et al.
REGENERATIVE MEDICINE (2021)
Central versus peripheral nervous system regeneration: is there an exception for cranial nerves?
Scott R. Echternacht et al.
REGENERATIVE MEDICINE (2021)
Formation of 3D Self-Organized Neuron-Glial Interface Derived from Neural Stem Cells via Mechano-Electrical Stimulation
Youyi Tai et al.
ADVANCED HEALTHCARE MATERIALS (2021)
Personalised Tasted Masked Chewable 3D Printed Fruit-Chews for Paediatric Patients
Atabak Ghanizadeh Tabriz et al.
PHARMACEUTICS (2021)
A Paradigm Shift in Tissue Engineering: From a Top-Down to a Bottom-Up Strategy
Theresa Schmidt et al.
PROCESSES (2021)
3D printing of functional nerve guide conduits
Yulan Huang et al.
BURNS & TRAUMA (2021)
An overview of latest advances in exploring bioactive peptide hydrogels for neural tissue engineering
Pooja Sharma et al.
BIOMATERIALS SCIENCE (2021)
Targeting Matrix Metalloproteinases: A Potential Strategy for Improving Cell Transplantation for Nervous System Repair
Yu-Ting Tseng et al.
CELL TRANSPLANTATION (2021)
Multifunctional conductive hydrogels and their applications as smart wearable devices
Zhen Chen et al.
JOURNAL OF MATERIALS CHEMISTRY B (2021)
Biomaterials for Neural Tissue Engineering
Laura Rodriguez Doblado et al.
FRONTIERS IN NANOTECHNOLOGY (2021)
Stimuli-responsive conductive hydrogels: design, properties, and applications
Zexing Deng et al.
MATERIALS CHEMISTRY FRONTIERS (2021)
Neural tissue engineering: the influence of scaffold surface topography and extracellular matrix microenvironment
Chun-Yi Yang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2021)
3D printing of tissue engineering scaffolds: a focus on vascular regeneration
Pengju Wang et al.
BIO-DESIGN AND MANUFACTURING (2021)
Effect of valproic acid on the hepatic differentiation of mesenchymal stem cells in 2D and 3D microenvironments
Saman Rashid et al.
MOLECULAR AND CELLULAR BIOCHEMISTRY (2021)
Conductive Scaffolds for Cardiac and Neuronal Tissue Engineering: Governing Factors and Mechanisms
Alex Burnstine-Townley et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Porous conductive and biocompatible scaffolds on the basis of polycaprolactone and polythiophene for scaffolding
Raana Sarvari et al.
POLYMER BULLETIN (2020)
Recent Advances in 4D Bioprinting
Qingzhen Yang et al.
BIOTECHNOLOGY JOURNAL (2020)
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
David Chimene et al.
ADVANCED MATERIALS (2020)
Electrospun chitosan/nanocrystalline cellulose-graft-poly(N-vinylcaprolactam) nanofibers as the reinforced scaffold for tissue engineering
Marjan Ghorbani et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Dual-responsive shape memory and self-healing ability of a novel copolymer from epoxy/cashew nut shell liquid and polycaprolactone
Narubeth Lorwanishpaisarn et al.
POLYMER TESTING (2020)
Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives
Janitha M. Unagolla et al.
APPLIED MATERIALS TODAY (2020)
Piezoelectric Nano-Biomaterials for Biomedicine and Tissue Regeneration
Kausik Kapat et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Actively controlled local drug delivery using conductive polymer-based devices
Christopher A. R. Chapman et al.
APPLIED PHYSICS LETTERS (2020)
A new waterborne chitosan-based polyurethane hydrogel as a vehicle to transplant bone marrow mesenchymal cells improved wound healing of ulcers in a diabetic rat model
Christian Viezzer et al.
CARBOHYDRATE POLYMERS (2020)
Naturally biomimicked smart shape memory hydrogels for biomedical functions
Jay M. Korde et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Degradable piezoelectric biomaterials for wearable and implantable bioelectronics
Jun Li et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2020)
Natural polypeptides-based electrically conductive biomaterials for tissue engineering
Somayeh Vandghanooni et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Non-destructive dose verification of two drugs within 3D printed polyprintlets
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
An effective dual-factor modified 3D-printed PCL scaffold for bone defect repair
Yan Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
Polypyrrole/graphene oxide composite coating on Ti implants: a promising material for biomedical applications
Bhavana Rikhari et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Flexible conducting polymer-based cellulose substrates for on-skin applications
Xiaoxu Fu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Effect of nanocomposite coating and biomolecule functionalization on silk fibroin based conducting 3D braided scaffolds for peripheral nerve tissue engineering
Mamatha M. Pillai et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2020)
On-chip 3D neuromuscular model for drug screening and precision medicine in neuromuscular disease
Tatsuya Osaki et al.
NATURE PROTOCOLS (2020)
Pharmacogenomic phase transition from personalized medicine to patient-centric customized delivery
Arun Radhakrishnan et al.
PHARMACOGENOMICS JOURNAL (2020)
Blends of highly branched and linear poly(arylene ether sulfone)s: Multiscale effect of the degree of branching on the morphology and mechanical properties
E. Billur Sevinis Ozbulut et al.
POLYMER (2020)
4D printing of personalized shape memory polymer vascular stents with negative Poisson's ratio structure: A preliminary study
Cheng Lin et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
Engineering of brain-like tissue constructs via 3D Cell-printing technology
Yu Song et al.
BIOFABRICATION (2020)
The role of side-branching in microstructure development in laser powder-bed fusion
Minh-Son Pham et al.
NATURE COMMUNICATIONS (2020)
Aspiration-assisted bioprinting for precise positioning of biologics
Bugra Ayan et al.
SCIENCE ADVANCES (2020)
Patient Centric Pharmaceutical Drug Product Design-The Impact on Medication Adherence
Enrica Menditto et al.
PHARMACEUTICS (2020)
Solvent-Free One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Poly(1,3-propylene succinate) Glycol with Temperature-Sensitive Shape Memory Behavior
Cattaleeya Pattamaprom et al.
ACS OMEGA (2020)
Grafting of 3D Bioprinting to In Vitro Drug Screening: A Review
Jing Nie et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Functional electrical stimulation therapy for restoration of motor function after spinal cord injury and stroke: a review
Cesar Marquez-Chin et al.
BIOMEDICAL ENGINEERING ONLINE (2020)
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Claire Yu et al.
CHEMICAL REVIEWS (2020)
Evolution of Dip-Pen Nanolithography (DPN): From Molecular Patterning to Materials Discovery
Guoqiang Liu et al.
CHEMICAL REVIEWS (2020)
Preparation of antibacterial and osteoconductive 3D-printed PLGA/Cu(I)@ZIF-8 nanocomposite scaffolds for infected bone repair
Fei Zou et al.
JOURNAL OF NANOBIOTECHNOLOGY (2020)
Temperature and electrostatics effects on charged poly(N-isopropylacrylamide) microgels at the interface
Yan Yang et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Functional reconstruction of injured corpus cavernosa using 3D-printed hydrogel scaffolds seeded with HIF-1α-expressing stem cells
Geng An et al.
NATURE COMMUNICATIONS (2020)
Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Jiaxing Gong et al.
NATURE COMMUNICATIONS (2020)
Magnetically Powered Biodegradable Microswimmers
Ho Cheung Michael Sun et al.
MICROMACHINES (2020)
Bioengineering Vascular Networks to Study Angiogenesis and Vascularization of Physiologically Relevant Tissue Models in Vitro
Serkan Dikici et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction
Xiaoyan Xu et al.
ADDITIVE MANUFACTURING (2020)
Ultrastable Plasmonic Bioink for Printable Point-Of-Care Biosensors
Ze Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Mechanical Properties Tailoring of 3D Printed Photoresponsive Nanocellulose Composites
Luca A. E. Mueller et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Ice-templating of chitosan/agarose porous composite hydrogel with adjustable water-sensitive shape memory property and multi-staged degradation performance
Kun Yan et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2020)
3D printing for drug delivery and biomedical applications
Sarwar Beg et al.
DRUG DISCOVERY TODAY (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
The global rise of 3D printing during the COVID-19 pandemic
Yu Ying Clarrisa Choong et al.
NATURE REVIEWS MATERIALS (2020)
On -demand fully customizable drug tablets via 3D printing technology for personalized medicine
Yan Jie Neriah Tan et al.
JOURNAL OF CONTROLLED RELEASE (2020)
Rapid Processing and Drug Evaluation in Glioblastoma Patient-Derived Organoid Models with 4D Bioprinted Arrays
Michelle Chadwick et al.
ISCIENCE (2020)
Semi-Interpenetrating Polymer Network of Hyaluronan and Chitosan Self-Healing Hydrogels for Central Nervous System Repair
Yi Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Human-scale tissues with patterned vascular networks by additive manufacturing of sacrificial sugar-protein composites
Hoda M. Eltaher et al.
ACTA BIOMATERIALIA (2020)
Advancing bioinks for 3D bioprinting using reactive fillers: A review
Susanne Heid et al.
ACTA BIOMATERIALIA (2020)
3D-printing pen versus desktop 3D-printers: Fabrication of carbon black/polylactic acid electrodes for single-drop detection of 2,4,6-trinitrotoluene
Rafael M. Cardoso et al.
ANALYTICA CHIMICA ACTA (2020)
3D-bioprinted functional and biomimetic hydrogel scaffolds incorporated with nanosilicates to promote bone healing in rat calvarial defect model
Bin Liu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Poly(caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs
Sarah A. Stewart et al.
MOLECULAR PHARMACEUTICS (2020)
Preparation and characterization of polypills containing aspirin and simvastatin using 3D printing technology for the prevention of cardiovascular diseases
Niloufar Keikhosravi et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Compact Optical Neural Probes With Up to 20 Integrated Thin-Film μLEDs Applied in Acute Optogenetic Studies
Suleman Ayub et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2020)
Delivering Proangiogenic Factors from 3D-Printed Polycaprolactone Scaffolds for Vascularized Bone Regeneration
Haoming Liu et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Application of Extrusion-Based 3D Printed Dosage Forms in the Treatment of Chronic Diseases
Manjusha Annaji et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
3D printing tissue-mimicking materials for realistic transseptal puncture models
Lindsey B. Bezek et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Establishment of patient-derived cancer organoids for drug-screening applications
Else Driehuis et al.
NATURE PROTOCOLS (2020)
Transforming clinical trials in rheumatology: towards patient-centric precision medicine
Costantino Pitzalis et al.
NATURE REVIEWS RHEUMATOLOGY (2020)
Personalized Three-Dimensional Printing Pedicle Screw Guide Innovation for the Surgical Management of Patients with Adolescent Idiopathic Scoliosis
Alpaslan Senkoylu et al.
WORLD NEUROSURGERY (2020)
Current Advances on 3D-Bioprinted Liver Tissue Models
Liang Ma et al.
ADVANCED HEALTHCARE MATERIALS (2020)
4D printing of shape memory polymer via liquid crystal display (LCD) stereolithographic 3D printing
Wubin Shan et al.
MATERIALS RESEARCH EXPRESS (2020)
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Ruitao Su et al.
SCIENCE ADVANCES (2020)
Integrating Biosensors in Organs-on-Chip Devices: A Perspective on Current Strategies to Monitor Microphysiological Systems
Erika Ferrari et al.
BIOSENSORS-BASEL (2020)
Tough magnesium phosphate-based 3D-printed implants induce bone regeneration in an equine defect model
Nasim Golafshan et al.
BIOMATERIALS (2020)
Simple and robust fabrication and characterization of conductive carbonized nanofibers loaded with gold nanoparticles for bone tissue engineering applications
Houra Nekounam et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Three-dimensional printed 5-fluorouracil eluting polyurethane stents for the treatment of oesophageal cancers
Paris Fouladian et al.
BIOMATERIALS SCIENCE (2020)
Coaxial printing of double-layered and free-standing blood vessel analogues without ultraviolet illumination for high-volume vascularised tissue
Van Thuy Duong et al.
BIOFABRICATION (2020)
3D-printed Bioreactors for In Vitro Modeling and Analysis
Balasankar Meera Priyadarshini et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2020)
3D bioprinting for the endocrine glands
Mervesu Gokyurek et al.
EMERGENT MATERIALS (2020)
Physically Active Bioreactors for Tissue Engineering Applications
N. Castro et al.
ADVANCED BIOSYSTEMS (2020)
3D Bioprinting of Tumor Models for Cancer Research
Youngnam Kang et al.
ACS APPLIED BIO MATERIALS (2020)
Off-target effect of the BMI1 inhibitor PTC596 drives epithelial-mesenchymal transition in glioblastoma multiforme
Anthony Flamier et al.
NPJ PRECISION ONCOLOGY (2020)
Improving Bioprinted Volumetric Tumor Microenvironnents In Vitro
Jun Li et al.
TRENDS IN CANCER (2020)
Three dimensional printed degradable and conductive polymer scaffolds promote chondrogenic differentiation of chondroprogenitor cells
Aruna Prasopthum et al.
BIOMATERIALS SCIENCE (2020)
Digestion degree is a key factor to regulate the printability of pure tendon decellularized extracellular matrix bio-ink in extrusion-based 3D cell printing
Fengyuan Zhao et al.
BIOFABRICATION (2020)
Harnessing the self-assembly of peptides for the targeted delivery of anti-cancer agents
Stephanie J. Franks et al.
MATERIALS HORIZONS (2020)
Active-targeting and acid-sensitive pluronic prodrug micelles for efficiently overcoming MDR in breast cancer
Cheng Xu et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Structural tuning of polycaprolactone based thermadapt shape memory polymer
Wusha Miao et al.
POLYMER CHEMISTRY (2020)
Biomimetic Materials and Their Utility in Modeling the 3-Dimensional Neural Environment
Arianna Cembran et al.
ISCIENCE (2020)
Improved cell viability for large-scale biofabrication with photo-crosslinkable hydrogel systems through a dual-photoinitiator approach
Win Tun Han et al.
BIOMATERIALS SCIENCE (2020)
Three-dimensional cell printing of gingival fibroblast/acellular dermal matrix/gelatin-sodium alginate scaffolds and their biocompatibility evaluation in vitro
Peng Liu et al.
RSC ADVANCES (2020)
Bioprinting of an osteocyte network for biomimetic mineralization
Yiqi Yang et al.
BIOFABRICATION (2020)
Electroconductive materials as biomimetic platforms for tissue regeneration
Katsuhiro Hosoyama et al.
BIOTECHNOLOGY ADVANCES (2019)
Electroconductive polyurethane/graphene nanocomposite for biomedical applications
Saeid Bahrami et al.
COMPOSITES PART B-ENGINEERING (2019)
'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures
Beatriz C. Pereira et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Development of Gelatin and Graphene-Based Nerve Regeneration Conduits Using Three-Dimensional (3D) Printing Strategies for Electrical Transdifferentiation of Mesenchymal Stem Cells
Metin Uz et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
A novel near-infrared light responsive 4D printed nanoarchitecture with dynamically and remotely controllable transformation
Haitao Cui et al.
NANO RESEARCH (2019)
3D Printing of Pharmaceutical and Medical Applications: a New Era
Dionysios Douroumis
PHARMACEUTICAL RESEARCH (2019)
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Camden A. Chatham et al.
PROGRESS IN POLYMER SCIENCE (2019)
A molecular perovskite solid solution with piezoelectricity stronger than lead zirconate titanate
Wei-Qiang Liao et al.
SCIENCE (2019)
Biofabrication strategies for creating microvascular complexity
Alisa Morss Clyne et al.
BIOFABRICATION (2019)
Toward the Targeted Design of Molecular Ferroelectrics: Modifying Molecular Symmetries and Homochirality
Han-Yue Zhang et al.
ACCOUNTS OF CHEMICAL RESEARCH (2019)
Efficient Delivery of Nerve Growth Factors to the Central Nervous System for Neural Regeneration
Duo Xu et al.
ADVANCED MATERIALS (2019)
Bionic design and 3D printing of porous titanium alloy scaffolds for bone tissue repair
Li Zhao et al.
COMPOSITES PART B-ENGINEERING (2019)
Microfluidic bioprinting for organ-on-a-chip models
Fang Yu et al.
DRUG DISCOVERY TODAY (2019)
Nanocellulose/PEGDA aerogel scaffolds with tunable modulus prepared by stereolithography for three-dimensional cell culture
Aimin Tang et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2019)
Promoting Proliferation and Differentiation of Pre-Osteoblasts MC3T3-E1 Cells Under Combined Mechanical and Electrical Stimulation
Ping Li et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2019)
Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds
Zuying Feng et al.
JOURNAL OF NANOMATERIALS (2019)
Orchestrated biomechanical, structural, and biochemical stimuli for engineering anisotropic meniscus
Zheng-Zheng Zhang et al.
SCIENCE TRANSLATIONAL MEDICINE (2019)
3D Bioprinting in Skeletal Muscle Tissue Engineering
Serge Ostrovidov et al.
SMALL (2019)
3D Bioprinting: from Benches to Translational Applications
Marcel Alexander Heinrich et al.
SMALL (2019)
Recent advances in 3D printing: vascular network for tissue and organ regeneration
Sung Yun Hann et al.
TRANSLATIONAL RESEARCH (2019)
'Living' Inks for 3D Bioprinting
Leo (Huan-Hsuan) Hsu et al.
TRENDS IN BIOTECHNOLOGY (2019)
The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine
G. Cidonio et al.
BIOMATERIALS (2019)
Design Approaches for Generating Organ Constructs
Yun Xia et al.
CELL STEM CELL (2019)
Development of 3D printable conductive hydrogel with crystallized PEDOT:PSS for neural tissue engineering
Dong Nyoung Heo et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Engineering of Chitosan-Hydroxyapatite-Magnetite Hierarchical Scaffolds for Guided Bone Growth
Alessandro Pistone et al.
MATERIALS (2019)
Expandable drug delivery system for gastric retention based on shape memory polymers: Development via 4D printing and extrusion
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Addressing Patient Specificity in the Engineering of Tumor Models
Laura J. Bray et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)
Bioinspired surface modification of orthopedic implants for bone tissue engineering
Chao Hu et al.
BIOMATERIALS (2019)
3D Bioprinted In Vitro Metastatic Models via Reconstruction of Tumor Microenvironments
Fanben Meng et al.
ADVANCED MATERIALS (2019)
Piezoelectric Biomaterials for Sensors and Actuators
Meysam T. Chorsi et al.
ADVANCED MATERIALS (2019)
Harnessing stem cells and biomaterials to promote neural repair
K. F. Bruggeman et al.
BRITISH JOURNAL OF PHARMACOLOGY (2019)
Printfills: 3D printed systems combining fused deposition modeling and injection volume filling. Application to colon-specific drug delivery
Vicente Linares et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Three-dimensional Bioprinting for Bone and Cartilage Restoration in Orthopaedic Surgery
Aman Dhawan et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2019)
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Jacob Koffler et al.
NATURE MEDICINE (2019)
An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
Kapilkumar Vithani et al.
PHARMACEUTICAL RESEARCH (2019)
Biotechnological applications of elastin-like polypeptides and the inverse transition cycle in the pharmaceutical industry
Emmanuella E. Fletcher et al.
PROTEIN EXPRESSION AND PURIFICATION (2019)
3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release
Hakan Ceylan et al.
ACS NANO (2019)
3D printing of biomimetic vasculature for tissue regeneration
Dong Lei et al.
MATERIALS HORIZONS (2019)
Effective bioprinting resolution in tissue model fabrication
Amir K. Miri et al.
LAB ON A CHIP (2019)
3D Printing of Pharmaceuticals and Transdermal Drug Delivery-An Overview
David Bird et al.
TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS (2019)
Cell-laden four-dimensional bioprinting using near-infrared-triggered shape-morphing alginate/polydopamine bioinks
Yongxiang Luo et al.
BIOFABRICATION (2019)
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhizhou Zhang et al.
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2019)
3D printable hyaluronic acid-based hydrogel for its potential application as a bioink in tissue engineering
Insup Noh et al.
BIOMATERIALS RESEARCH (2019)
Complete canine spinal cord transection model: a large animal model for the translational research of spinal cord regeneration
Sufang Han et al.
SCIENCE CHINA-LIFE SCIENCES (2018)
Dynamic and Responsive Growth Factor Delivery from Electrospun and Hydrogel Tissue Engineering Materials
Kiara F. Bruggeman et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Visible Light Photoinitiation of Cell-Adhesive Gelatin Methacryloyl Hydrogels for Stereolithography 3D Bioprinting
Zongjie Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Cell reprogramming by 3D bioprinting of human fibroblasts in polyurethane hydrogel for fabrication of neural-like constructs
Lin Ho et al.
ACTA BIOMATERIALIA (2018)
3D bioprinting of tissues and organs for regenerative medicine
Sanjairaj Vijayavenkataraman et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Large and Small Assembly: Combining Functional Macromolecules with Small Peptides to Control the Morphology of Skeletal Muscle Progenitor Cells
Rui Li et al.
BIOMACROMOLECULES (2018)
Transcutaneously refillable, 3D-printed biopolymeric encapsulation system for the transplantation of endocrine cells
Marco Farina et al.
BIOMATERIALS (2018)
Bioprinted gelatin hydrogel platform promotes smooth muscle cell contractile phenotype maintenance
Ajay Tijore et al.
BIOMEDICAL MICRODEVICES (2018)
Fabrication of truly 3D microfluidic channel using 3D-printed soluble mold
Kyunghun Kang et al.
BIOMICROFLUIDICS (2018)
Personalisation of warfarin therapy using thermal ink-jet printing
Parameswara Rao Vuddanda et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
On demand manufacturing of patient-specific liquid capsules via coordinated 3D printing and liquid dispensing
Tochukwu C. Okwuosa et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Tailored on demand anti-coagulant dosing: An in vitro and in vivo evaluation of 3D printed purpose-designed oral dosage forms
Basel Arafat et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
PEG-ran-PPG Modified Epoxy Thermosets: A Simple Approach To Develop Tough Shape Memory Polymers
Jyotishkumar Parameswaranpillai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
3D printed hyperelastic bone scaffolds and regional gene therapy: A novel approach to bone healing
Ram Alluri et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Yongzhou Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Three-dimensional printing of multilayered tissue engineering scaffolds
Sean M. Bittner et al.
MATERIALS TODAY (2018)
An in vivo model of functional and vascularized human brain organoids
Abed AlFatah Mansour et al.
NATURE BIOTECHNOLOGY (2018)
The potential of 3D printing in urological research and patient care
Marc Colaco et al.
NATURE REVIEWS UROLOGY (2018)
Engineering a Clinically Translatable Bioartificial Pancreas to Treat Type I Diabetes
Gorka Orive et al.
TRENDS IN BIOTECHNOLOGY (2018)
An integrated multi-layer 3D-fabrication of PDA/RGD coated graphene loaded PCL nanoscaffold for peripheral nerve restoration
Yun Qian et al.
NATURE COMMUNICATIONS (2018)
Injured adult motor and sensory axons regenerate into appropriate organotypic domains of neural progenitor grafts
Jennifer N. Dulin et al.
NATURE COMMUNICATIONS (2018)
3D Printed porous polyamide macrocapsule combined with alginate microcapsules for safer cell-based therapies
Laura Saenz del Burgo et al.
SCIENTIFIC REPORTS (2018)
Patient-Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds
Negar Faramarzi et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Addressing Unmet Clinical Needs with 3D Printing Technologies
Udayan Ghosh et al.
ADVANCED HEALTHCARE MATERIALS (2018)
3D and 4D Bioprinting of the Myocardium: Current Approaches, Challenges, and Future Prospects
Chin Siang Ong et al.
BIOMED RESEARCH INTERNATIONAL (2018)
3D printing of ceramic-based scaffolds for bone tissue engineering: an overview
Xiaoyu Du et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
3D printing of a wearable personalized oral delivery device: A first-in-human study
Kun Liang et al.
SCIENCE ADVANCES (2018)
A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues
Sandra Laternser et al.
SLAS TECHNOLOGY (2018)
Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers
Ugur Bozuyuk et al.
ACS NANO (2018)
3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Daeha Joung et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
A multi-cellular 3D bioprinting approach for vascularized heart tissue engineering based on HUVECs and iPSC-derived cardiomyocytes
Fabio Maiullari et al.
SCIENTIFIC REPORTS (2018)
Microstructure and in vivo characterization of multi-channel nerve guidance scaffolds
K. M. Pawelec et al.
BIOMEDICAL MATERIALS (2018)
Enhancement of ketoconazole dissolution rate by the liquisolid technique
Mir-Ali Molaei et al.
ACTA PHARMACEUTICA (2018)
Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering
Shida Miao et al.
ADVANCED BIOSYSTEMS (2018)
3D Bioprinting for Tissue and Organ Fabrication
Yu Shrike Zhang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
3D Printing of Tissue Engineered Constructs for In Vitro Modeling of Disease Progression and Drug Screening
Joseph Vanderburgh et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
4D Printing of Shape Memory-Based Personalized Endoluminal Medical Devices
Matt Zarek et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2017)
Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2017)
Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging
Daniel Markl et al.
PHARMACEUTICAL RESEARCH (2017)
3D Bioprinting for Organ Regeneration
Haitao Cui et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Shape Memory Properties of Epoxy/PPO-PEO-PPO Triblock Copolymer Blends with Tunable Thermal Transitions and Mechanical Characteristics
Jyotishkumar Parameswaranpillai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Zaid Muwaffak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Jiaxiang Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
Mary Kyobula et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Personalised dosing of medicines for children
Basma Al-Metwali et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2017)
3D bioprinting in regenerative medicine and tissue engineering
Jean-Christophe Fricain et al.
M S-MEDECINE SCIENCES (2017)
Reversible Shape-Memory Effect in Cross-Linked Linear Poly(ε-caprolactone) under Stress and Stress-Free Conditions
Oleksandr Dolynchuk et al.
MACROMOLECULES (2017)
Bio-inks for 3D bioprinting: recent advances and future prospects
Ilze Donderwinkel et al.
POLYMER CHEMISTRY (2017)
Short-term hypoxic preconditioning promotes prevascularization in 3D bioprinted bone constructs with stromal vascular fraction derived cells
Mitchell A. Kuss et al.
RSC ADVANCES (2017)
A Gelatin-sulfonated Silk Composite Scaffold based on 3D Printing Technology Enhances Skin Regeneration by Stimulating Epidermal Growth and Dermal Neovascularization
Si Xiong et al.
SCIENTIFIC REPORTS (2017)
Combinatorial Therapies After Spinal Cord Injury: How Can Biomaterials Help?
Tobias Fuhrmann et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Batzaya Byambaa et al.
ADVANCED HEALTHCARE MATERIALS (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
From 3D to 4D Printing - Design, Material and Fabrication for Multi-Functional Multi-Materials
Varsha Khare et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Xuyu Chai et al.
SCIENTIFIC REPORTS (2017)
Biodegradable elastic nanofibrous platforms with integrated flexible heaters for on-demand drug delivery
Ali Tamayol et al.
SCIENTIFIC REPORTS (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Using Printing Orientation for Tuning Fluidic Behavior in Microfluidic Chips Made by Fused Deposition Modeling 3D Printing
Feng Li et al.
ANALYTICAL CHEMISTRY (2017)
3-D bioprinting technologies in tissue engineering and regenerative medicine: Current and future trends
Elliot S. Bishop et al.
GENES & DISEASES (2017)
Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices
Michael J. Beauchamp et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)
From molecular design to 3D printed life-like materials with unprecedented properties
D. J. Wu et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Fundamentals and applications of 3D printing for novel materials
Jian-Yuan Lee et al.
APPLIED MATERIALS TODAY (2017)
Direct 3D cell-printing of human skin with functional transwell system
Byoung Soo Kim et al.
BIOFABRICATION (2017)
Biocompatible Shape Memory Blend for Self-Expandable Stents with Potential Biomedical Applications
Yu Zheng et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering
Hyungseok Lee et al.
BIOMACROMOLECULES (2017)
4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials
Yi-Chen Li et al.
BIOFABRICATION (2017)
3D-Printed Drugs for Children-Are We Ready Yet?
Maren Preis et al.
AAPS PHARMSCITECH (2017)
3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair
Jinah Jang et al.
BIOMATERIALS (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Tailoring minimalist self-assembling peptides for localized viral vector gene delivery
Alexandra L. Rodriguez et al.
NANO RESEARCH (2016)
Small airway-on-a-chip enables analysis of human lung inflammation and drug responses in vitro
Kambez H. Benam et al.
NATURE METHODS (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Current advances and future perspectives in extrusion-based bioprinting
Ibrahim T. Ozbolat et al.
BIOMATERIALS (2016)
Osteogenic effect of controlled released rhBMP-2 in 3D printed porous hydroxyapatite scaffold
Hai Wang et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Is time an extra dimension in 3D cell culture?
Amish Asthana et al.
DRUG DISCOVERY TODAY (2016)
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Alvaro Goyanes et al.
JOURNAL OF CONTROLLED RELEASE (2016)
Three-Dimensional Printing of Carbamazepine Sustained-Release Scaffold
Seng Han Lim et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
3D printed microfluidic devices: enablers and barriers
Sidra Waheed et al.
LAB ON A CHIP (2016)
One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology
Hyungseok Lee et al.
LAB ON A CHIP (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Xuanyi Ma et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
A Self-Folding Hydrogel In Vitro Model for Ductal Carcinoma
Hye Rin Kwag et al.
TISSUE ENGINEERING PART C-METHODS (2016)
4D Bioprinting for Biomedical Applications
Bin Gao et al.
TRENDS IN BIOTECHNOLOGY (2016)
Printed Drug-Delivery Systems for Improved Patient Treatment
Niklas Sandler et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2016)
Patterning of Endothelial Cells and Mesenchymal Stem Cells by Laser-Assisted Bioprinting to Study Cell Migration
Jean-Michel Bourget et al.
BIOMED RESEARCH INTERNATIONAL (2016)
Design of a Smart Nerve Conduit Based on a Shape-Memory Polymer
Cheng Chen et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Biomechanical Performances of Networked Polyethylene Glycol Diacrylate: Effect of Photoinitiator Concentration, Temperature, and Incubation Time
Morshed Khandaker et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2016)
Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint
Jin-Hyung Shim et al.
BIOFABRICATION (2016)
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Jin Woo Lee et al.
BIOFABRICATION (2016)
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
S. Vijayavenkataraman et al.
BIOFABRICATION (2016)
3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs
Stephanie Knowlton et al.
BIOFABRICATION (2016)
Advancing the field of 3D biomaterial printing
Adam E. Jakus et al.
BIOMEDICAL MATERIALS (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Bioink properties before, during and after 3D bioprinting
Katja Hoelzl et al.
BIOFABRICATION (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
Christopher B. Highley et al.
ADVANCED MATERIALS (2015)
Conducting Polymers for Neural Prosthetic and Neural Interface Applications
Rylie Green et al.
ADVANCED MATERIALS (2015)
Drop printing of pharmaceuticals: Effect of molecular weight on PEG coated-naproxen/PEG 3350 solid dispersions
Hsin-Yun Hsu et al.
AICHE JOURNAL (2015)
Biomimetic scaffolds facilitate healing of critical-sized segmental mandibular defects
Matthew K. Lee et al.
AMERICAN JOURNAL OF OTOLARYNGOLOGY (2015)
Engineered In Vitro Disease Models
Kambez H. Benam et al.
ANNUAL REVIEW OF PATHOLOGY: MECHANISMS OF DISEASE, VOL 10 (2015)
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Rodrigo Lozano et al.
BIOMATERIALS (2015)
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Falguni Pati et al.
BIOMATERIALS (2015)
Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA
Guifang Gao et al.
BIOTECHNOLOGY LETTERS (2015)
Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
Jin-Feng Xing et al.
CHEMICAL SOCIETY REVIEWS (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Additive manufacturing in biomedical sciences and the need for definitions and norms
Mohit P. Chhaya et al.
EXPERT REVIEW OF MEDICAL DEVICES (2015)
Formulation factors affecting acceptability of oral medicines in children
Fang Liu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Dropwise Additive Manufacturing of Pharmaceutical Products for Melt-Based Dosage Forms
Elcin Icten et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Shannon E. Bakarich et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2015)
Fabrication of scalable and structured tissue engineering scaffolds using water dissolvable sacrificial 3D printed moulds
Soumyaranjan Mohanty et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Organs-on-chips at the frontiers of drug discovery
Eric W. Esch et al.
NATURE REVIEWS DRUG DISCOVERY (2015)
Advances in regenerative therapies for spinal cord injury: a biomaterials approach
Magdalini Tsintou et al.
NEURAL REGENERATION RESEARCH (2015)
Formulation, characterization, and geno/cytotoxicity studies of galbanic acid-loaded solid lipid nanoparticles
Morteza Eskandani et al.
PHARMACEUTICAL BIOLOGY (2015)
Active mixing of complex fluids at the microscale
Thomas J. Ober et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Positively Charged Oligo[Poly(Ethylene Glycol) Fumarate] Scaffold Implantation Results in a Permissive Lesion Environment after Spinal Cord Injury in Rat
Jeffrey S. Hakim et al.
TISSUE ENGINEERING PART A (2015)
Optimizing cell viability in droplet-based cell deposition
Jan Hendriks et al.
SCIENTIFIC REPORTS (2015)
4D Printing Technology: A Review
Jin Choi et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2015)
Writing in the granular gel medium
Tapomoy Bhattacharjee et al.
SCIENCE ADVANCES (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
Thomas J. Hinton et al.
SCIENCE ADVANCES (2015)
Granulation techniques and technologies: recent progresses
Srinivasan Shanmugam
BIOIMPACTS (2015)
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Atabak Ghanizadeh Tabriz et al.
BIOFABRICATION (2015)
A 3D bioprinted complex structure for engineering the muscle-tendon unit
Tyler K. Merceron et al.
BIOFABRICATION (2015)
Conductive polymers: Towards a smart biomaterial for tissue engineering
Richard Balint et al.
ACTA BIOMATERIALIA (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Delivery of Growth Factors Using a Smart Porous Nanocomposite Scaffold to Repair a Mandibular Bone Defect
Xian Liu et al.
BIOMACROMOLECULES (2014)
Advances in paper-based point-of-care diagnostics
Jie Hu et al.
BIOSENSORS & BIOELECTRONICS (2014)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds
Joshua P. Temple et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Evaluation of the Effects of Systemic Treatment with a Sclerostin Neutralizing Antibody on Bone Repair in a Rat Femoral Defect Model
Farhang Alaee et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2014)
Wound Complications Associated With Bone Morphogenetic Protein-2 in Orthopaedic Trauma Surgery
Daniel S. Chan et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2014)
Regenerative Therapies for Central Nervous System Diseases: a Biomaterials Approach
Roger Y. Tam et al.
NEUROPSYCHOPHARMACOLOGY (2014)
Networked Neuro-Spheres Formed by Topological Attractants for Engineering of 3-Dimensional Nervous System
Gi Seok Jeong
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Three-Dimensional Printing of rhBMP-2-Loaded Scaffolds with Long-Term Delivery for Enhanced Bone Regeneration in a Rabbit Diaphyseal Defect
Jin-Hyung Shim et al.
TISSUE ENGINEERING PART A (2014)
3D printing of composite tissue with complex shape applied to ear regeneration
Jung-Seob Lee et al.
BIOFABRICATION (2014)
BioPen: direct writing of functional materials at the point of care
Yu Long Han et al.
SCIENTIFIC REPORTS (2014)
Active Printed Materials for Complex Self- Evolving Deformations
Dan Raviv et al.
SCIENTIFIC REPORTS (2014)
Harnessing the Electric Spark of Life to Cure Skin Wounds
Cristina Martin-Granados et al.
ADVANCES IN WOUND CARE (2014)
Active materials by four-dimension printing
Qi Ge et al.
APPLIED PHYSICS LETTERS (2013)
Cellular behavior in micropatterned hydrogels by bioprinting system depended on the cell types and cellular interaction
Soyoung Hong et al.
JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2013)
Engineering a multimodal nerve conduit for repair of injured peripheral nerve
A. F. Quigley et al.
JOURNAL OF NEURAL ENGINEERING (2013)
Nanocomposites of aliphatic polyesters: An overview of the effect of different nanofillers on enzymatic hydrolysis and biodegradation of polyesters
Dimitrios N. Bikiaris
POLYMER DEGRADATION AND STABILITY (2013)
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Qiu Li Loh et al.
TISSUE ENGINEERING PART B-REVIEWS (2013)
Building Bridges for Spinal Cord Repair
Phillip G. Popovich
CELL (2012)
Regeneration of skeletal muscle
Neill J. Turner et al.
CELL AND TISSUE RESEARCH (2012)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Recent advances in shape-memory polymers: Structure, mechanism, functionality, modeling and applications
Jinlian Hu et al.
PROGRESS IN POLYMER SCIENCE (2012)
Indirect rapid prototyping of antibacterial acid anhydride copolymer microneedles
Ryan D. Boehm et al.
BIOFABRICATION (2012)
Moving from static to dynamic complexity in hydrogel design
Jason A. Burdick et al.
NATURE COMMUNICATIONS (2012)
Electrical Stimulation of Myoblast Proliferation and Differentiation on Aligned Nanostructured Conductive Polymer Platforms
Anita F. Quigley et al.
ADVANCED HEALTHCARE MATERIALS (2012)
Co-electrospun dual scaffolding system with potential for muscle-tendon junction tissue engineering
Mitchell R. Ladd et al.
BIOMATERIALS (2011)
Wallerian degeneration: the innate-immune response to traumatic nerve injury
Shlomo Rotshenker
JOURNAL OF NEUROINFLAMMATION (2011)
Application of conductive polymers, scaffolds and electrical stimulation for nerve tissue engineering
Laleh Ghasemi-Mobarakeh et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2011)
Formation of droplet networks that function in aqueous environments
Gabriel Villar et al.
NATURE NANOTECHNOLOGY (2011)
A critical review of recombinant human bone morphogenetic protein-2 trials in spinal surgery: emerging safety concerns and lessons learned
Eugene J. Carragee et al.
SPINE JOURNAL (2011)
Recovery as a measure of oriented crystalline structure in poly(L-lactide) used as shape memory polymer
Y. S. Wong et al.
ACTA MATERIALIA (2010)
Bioelectrochemical control of neural cell development on conducting polymers
Jorge E. Collazos-Castro et al.
BIOMATERIALS (2010)
Regeneration of long-tract axons through sites of spinal cord injury using templated agarose scaffolds
Thomas Gros et al.
BIOMATERIALS (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Establishing a model spinal cord injury in the African green monkey for the preclinical evaluation of biodegradable polymer scaffolds seeded with human neural stem cells
Christopher D. Pritchard et al.
JOURNAL OF NEUROSCIENCE METHODS (2010)
Novel oral fast-disintegrating drug delivery devices with predefined inner structure fabricated by Three-Dimensional Printing
Deng-Guang Yu et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2010)
Relationship between scaffold channel diameter and number of regenerating axons in the transected rat spinal cord
Aaron J. Krych et al.
ACTA BIOMATERIALIA (2009)
Wet-Spun Biodegradable Fibers on Conducting Platforms: Novel Architectures for Muscle Regeneration
Joselito M. Razal et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
A Conducting-Polymer Platform with Biodegradable Fibers for Stimulation and Guidance of Axonal Growth
Anita F. Quigley et al.
ADVANCED MATERIALS (2009)
Polymer Networks Combining Controlled Drug Release, Biodegradation, and Shape Memory Capability
Axel T. Neffe et al.
ADVANCED MATERIALS (2009)
Characterization of cell viability during bioprinting processes
Kalyani Nair et al.
Biotechnology Journal (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Nanotechnology and nanomaterials: Promises for improved tissue regeneration
Lijie Zhang et al.
NANO TODAY (2009)
Designed fabrication of a multifunctional polymer nanomedical platform for simultaneous cancer-targeted imaging and magnetically guided drug delivery
Jaeyun Kim et al.
ADVANCED MATERIALS (2008)
Neurite outgrowth on a DNA crosslinked hydrogel with tunable stiffnesses
Frank Xue Jiang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2008)
Three-dimensional printing in pharmaceutics: Promises and problems
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Structure and functional evaluation of tendon-skeletal muscle constructs engineered in vitro
Lisa M. Larkin et al.
TISSUE ENGINEERING (2006)
Opinion - Spinal cord repair strategies: why do they work?
Elizabeth J. Bradbury et al.
NATURE REVIEWS NEUROSCIENCE (2006)
Electrical signals control wound healing through phosphatidylinositol-3-OH kinase-γ and PTEN
Min Zhao et al.
NATURE (2006)
Controlling cell behavior electrically: Current views and future potential
CD McCaig et al.
PHYSIOLOGICAL REVIEWS (2005)
Rapid prototyping in tissue engineering: challenges and potential
WY Yeong et al.
TRENDS IN BIOTECHNOLOGY (2004)
Effects of hair follicle dermal sheath cells in the reconstruction of skin equivalents
HJ Cho et al.
JOURNAL OF DERMATOLOGICAL SCIENCE (2004)
Semiconducting and metallic polymers: The fourth generation of polymeric materials
AJ Heeger
JOURNAL OF PHYSICAL CHEMISTRY B (2001)
Electrical stimulation alters protein adsorption and nerve cell interactions with electrically conducting biomaterials
A Kotwal et al.
BIOMATERIALS (2001)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Share Paper
