☆ 4.4 Article

Current Challenge and Innovative Progress for Producing HVO and FAME Biodiesel Fuels and Their Applications

WASTE AND BIOMASS VALORIZATION (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Electrocoalescence of water droplet trains in sunflower oil under the coupling of Non-uniform electric and Laminar flow fields

Bin Li et al.

Summary: Electrocoalescence is an energy-efficient and environmentally-friendly process used in the oil and petroleum industries for demulsifying water-in-oil emulsions. In this study, the dynamic behavior of water droplet trains in sunflower oil under the coupling effect of non-uniform electric and laminar flow fields was experimentally investigated. The results showed that the coalescence efficiency decreased with increasing particle concentrations, and the coupling of non-uniform electric and flow fields could facilitate phase separation.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Solketal as a renewable fuel component in ternary blends with biodiesel and diesel fuel or HVO and the impact on physical and chemical properties

Julian Tuerck et al.

Summary: This study investigates the physical and chemical behavior of solketal in ternary blends with diesel fuel/biodiesel, finding that solketal has limited impact on fuel aging while blends containing HVO may reduce thermo-chemical stability relative to diesel fuel.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Effect of hydrogen enrichment on the flame propagation, emissions formation and energy balance of the natural gas spark ignition engine

Xingyu Sun et al.

Summary: Adding hydrogen to natural gas in spark ignition engines improves combustion rate, thermal efficiency, and emissions control.

FUEL (2022)

Add to Collection

Review Energy & Fuels

Methods for modifying needle coke raw materials by introducing additives of various origin (review)

Renat R. Gabdulkhakov et al.

Summary: "Needle coke, essential for the production of high-power graphite electrodes in steel production, is a scarce product in the refining industry. Researchers have been exploring ways to modify raw materials to produce needle coke, and this review provides insights into the various raw materials and additives used in the process."

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Novel promising octane hyperboosting using isoolefinic gasoline additives and its application on fuzzy modeling

Tamer M. M. Abdellatief et al.

Summary: Recently, there has been a rise in requirements for high-quality gasoline and an increase in demand. This research article proposes new insights into a novel octane hyperboosting phenomenon based on isoolefinic hydrocarbons as gasoline additives and its application on Fuzzy modeling. The results show that isooctene and isohexene can significantly improve engine performance, with higher motor octane numbers than pure isooctene and isohexene.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Food Science & Technology

Preparation of spray-dried soybean oil body microcapsules using maltodextrin: Effects of dextrose equivalence

Jianyu Zhu et al.

Summary: The study found that maltodextrin significantly affects the physicochemical properties and oxidative stability of soybean OB microcapsules, with MD 10 being the most effective wall material. This improved encapsulation efficiency and stability of the microcapsules, confirming spray-drying as a promising method for industrial production of functional oil products carrying biologically active ingredients.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Food Science & Technology

Non-destructive detection of soybean oil addition in babassu oil by MIR spectroscopy and chemometrics

Sthefany Nicolle Gomes Pereira et al.

Summary: This study developed a method to detect adulteration in babassu oil using mid-infrared spectroscopy and chemometric techniques, showing that FTIR-ATR spectroscopy associated with chemometrics performs well in detecting and quantifying adulteration.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Innovative approach for co-production of single cell oil (SCO), novel carbon-based solid acid catalyst and SCO-based biodiesel from fallen Dipterocarpus alatus leaves

Ratanaporn Leesing et al.

Summary: A new approach using Dipterocarpus alatus leaves for the co-production of SCO, carbon-based solid catalyst, and SCO-FAME was successfully demonstrated. The produced catalysts effectively catalyzed the transesterification reaction and achieved high yield of SCO-FAME with improved fuel properties.

RENEWABLE ENERGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Comparison of biodiesel production using a novel porous Zn/Al/Co complex oxide prepared from different methods: Physicochemical properties, reaction kinetic and thermodynamic studies

Chihe Sun et al.

Summary: The study prepared a heterogeneous cobalt doping Zn/Al complex oxide catalyst by a simple birch-templating method and successfully applied it to the transesterification of jatropha oil with methanol, achieving a high biodiesel yield. The crystalline particles from the templating method were uniformly distributed on the catalyst surface, forming a well-defined tiled network with large amounts of grain-free pores.

RENEWABLE ENERGY (2022)

Add to Collection

Article Environmental Sciences

New insights on introducing modern multifunctional additives into motor gasoline

Mikhail A. Ershov et al.

Summary: This research suggests new approaches to produce modern multifunctional motor gasoline additives, focusing on the components and effects of detergents, corrosion inhibitors, and friction modifiers in the additives. The bench method can be used to assess the effectiveness of the detergent component by accelerating deposit formation under specific conditions.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Environmental Sciences

Uniqueness technique for introducing high octane environmental gasoline using renewable oxygenates and its formulation on Fuzzy modeling

Tamer M. M. Abdellatief et al.

Summary: This study proposes a new approach to examine the impact of renewable fuel additives through fuzzy modeling, showing that using low carbon oxygenates can enhance the quality and quantity of heavy hydrocracked naphtha, potentially contributing to the production of high quality environmentally friendly gasoline.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Engineering, Environmental

Environmental assessment of four waste cooking oil valorization pathways

Fabiana Frota de Albuquerque Landi et al.

Summary: Global waste is expected to significantly increase by 2050, making it crucial to develop effective waste management strategies. Food and green waste account for a significant portion of total waste production, highlighting the importance of processing and reusing materials such as waste cooking oil. This study compares various valorization pathways for waste cooking oil, including biodiesel and direct burning fuel, to their common alternatives, and assesses their environmental impact and energy consumption. The results show that waste cooking oil has lower environmental impact in most cases, particularly as direct burning fuel. However, obstacles such as limited stock and collection difficulties need to be addressed for its widespread usage.

WASTE MANAGEMENT (2022)

Add to Collection

Article Engineering, Civil

Mechanical properties of roads unbound treated with synthetic fluid based on isoalkane and tall oil

Diego Maria Barbieri et al.

Summary: Unbound layers play a crucial role in pavement engineering, and stabilization technologies can be used to modify their mechanical properties. This study presents a synthetic fluid technology composed of isoalkane and tall oil pitch, which can significantly alter the mechanical properties of aggregates in the pavement. The laboratory results demonstrate the formation of a durable coating resistant to water and external actions.

TRANSPORTATION GEOTECHNICS (2022)

Add to Collection

Article Energy & Fuels

Hydrated metal salt pretreatment and alkali catalyzed reactive distillation: A two-step production of waste cooking oil biodiesel

Mikkel T. Grosmann et al.

Summary: A novel method using AlCl3 center dot 6H2O as a pretreatment to convert waste cooking oil into biodiesel was proposed. The method involves a two-step approach, which first converts FFA into methyl esters, and then performs transesterification in a reactive distillation column. The method proves to be efficient in obtaining biodiesel with a purity requirement conforming to EN14214 standards.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2022)

Add to Collection

Article Thermodynamics

Performance and emission characteristics assessment of compression ignition engine fuelled with the blends of novel antioxidant catechol-daok biodiesel

Shaik Mullan Karishma et al.

Summary: The study shows that using B20 blend can achieve optimal performance on a direct-injection diesel engine, with better engine PEC at CR 17.5. Additionally, adding 2.5% CAT to the B20 blend improves performance and increases BTE, while 1.5% CAT reduces CO and HC emissions.

ENERGY (2022)

Add to Collection

Review Chemistry, Applied

Soybean oil bodies: A review on composition, properties, food applications, and future research aspects

Farah Zaaboul et al.

Summary: The article provides a comprehensive overview of the structure and composition of soybean oil bodies, highlighting their potential value in food applications as replacements for traditional emulsions, and discussing potential issues and solutions.

FOOD HYDROCOLLOIDS (2022)

Add to Collection

Article Energy & Fuels

Effects of water vapor on auto-ignition characteristics and laminar flame speed of methane/air mixture under engine-relevant conditions

Zhipeng Yuan et al.

Summary: This paper numerically simulated the effects of water vapor on the auto-ignition characteristics and laminar flame speed of the methane/air mixture. The results showed that the ignition delay time of the methane/air increased with increasing water vapor ratio, and the laminar flame speed and adiabatic combustion temperature decreased as well.

FUEL (2022)

Add to Collection

Review Chemistry, Applied

Recent development of advanced processing technologies for biodiesel production: A critical review

Muhammad Aamir Bashir et al.

Summary: Research in biodiesel production technologies is focused on improving efficiency through the use of various catalysts and feedstocks. Emerging technologies like enzyme catalysis, batch reactors, and continuous flow reactors show promise in achieving high conversion yields.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

The importance of GHG emissions from land use change for biofuels in Brazil: An assessment for current and 2030 scenarios

Rodrigo Gomes Tavora Maia et al.

Summary: This paper analyzes the importance of considering land use change (LUC) in biofuels policy in Brazil and calculates the greenhouse gas (GHG) emissions from LUC in the Brazilian territory using the methods of REDII and Decision 2010/335. The research finds that only 10% of the Brazilian territory, if replaced by sugarcane crop, may produce first-generation sugarcane ethanol (E1G) with lower GHG emissions compared to gasoline.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Article Energy & Fuels

Perspective towards a gasoline-property-first approach exhibiting octane hyperboosting based on isoolefinic hydrocarbons

Mikhail A. Ershov et al.

Summary: This research paper proposes a method to boost the octane rating of low-octane gasoline by adding high-octane isoolefinic hydrocarbons. The study found that the addition of isoolefinic hydrocarbons significantly increased the motor octane number (MON) of the gasoline, indicating improved combustion performance in internal combustion engines.

FUEL (2022)

Add to Collection

Article Energy & Fuels

An evolving research agenda of merit function calculations for new gasoline compositions

Mikhail A. Ershov et al.

Summary: This study focuses on developing new gasoline formulations and establishing a mathematical model to evaluate their performance and emissions under different conditions. The experimental results show that the new formulations outperform the baseline gasoline slightly.

FUEL (2022)

Add to Collection

Article Engineering, Aerospace

Impact of different nano additives on performance, combustion, emissions and exergetic analysis of a diesel engine using waste cooking oil biodiesel

M. S. Gad et al.

Summary: This study investigates the influence of nano particles blended with biodiesel on engine performance and emissions. The results show that blending biodiesel with TiO2, Al2O3, and CNTs can enhance the combustion performance, decrease CO, HC, and smoke emissions, but increase NOx emissions.

PROPULSION AND POWER RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Pathways resilient future for developing a sustainable E85 fuel and prospects towards its applications

Vsevolod D. Savelenko et al.

Summary: Ethanol as a component of gasoline can improve combustion resistance and environmental performance, but high production cost hinders its actual production in Russia. Using ethanol impurity concentrate blend shows promise and can reduce production costs.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Energy & Fuels

Tribological study on the biodiesel produced from waste cooking oil, waste cooking oil blend with Calophyllum inophyllum and its diesel blends on lubricant oil

Jassinnee Milano et al.

Summary: This study investigates the friction and wear performance of biodiesel produced from waste cooking oil blended with Calophyllum inophyllum oil in lubricating oils. The results demonstrate that the blend of waste cooking oil and Calophyllum inophyllum oil with biodiesel-diesel blend has the lowest friction coefficient and provides effective protection. The study suggests that using this biodiesel as an additive in petroleum-based lubricants can improve automotive engine performance.

ENERGY REPORTS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Effect of corrosion rates of preheated Schinzochytrium sp. microalgae biodiesel on metallic components of a diesel engine

Babalola Aisosa Oni et al.

Alexandria Engineering Journal (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Biofuel from waste cooking oil of hospitality laboratory

Apury Yadav

Summary: Due to high demand of diesel, which is becoming scarcer, and the pollution caused by fossil fuels, biofuels can be an alternative as they have harmless emissions. However, most biofuels are produced from vegetable oils, which also have high demand in the food industry, leading to higher prices. Using waste cooking oil for biodiesel production can make the raw material cost insignificant.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Optimized biodiesel production from waste cooking oil using a functionalized bio-based heterogeneous catalyst

Andrew Nosakhare Amenaghawon et al.

Summary: This study assessed the potential of a composite bio-based heterogeneous catalyst for the transesterification of waste cooking oil. The catalyst exhibited a high biodiesel yield and stability, with properties comparable to standards. The synthesized catalyst has advantages over conventional catalysts due to its reusability, ease of synthesis, stability, high surface area, and availability of precursor materials.

CLEANER ENGINEERING AND TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

The crude tall oil value chain: Global availability and the influence of regional energy policies

Venkat Aryan et al.

Summary: This study analyzed the global supply and demand of CTO, revealing a steady increase in global CTO supply since 2009 but anticipating an imbalance in supply and demand after 2020 due to the growing demand for biofuels.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A review on biofuels for light-duty vehicles in Europe

S. Puricelli et al.

Summary: The European transport sector is a significant contributor to greenhouse gas emissions and biofuels are being explored as a way to reduce these emissions. In 2017, biofuels accounted for 4.5% of energy consumption in road transport and non-road mobile machinery, with biodiesel being the most consumed biofuel at 62% in the EU. Several studies have shown that biofuels generally have lower climate change impacts compared to diesel and petrol, with different types of biofuels offering varying levels of emission savings. Land use change effects are an important consideration, with the need to focus on non-edible feedstocks, waste, and by-products to minimize risks associated with land use change. European legislation is also working towards promoting the use of these more sustainable biofuel sources.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Environmental Sciences

Hybrid low-carbon high-octane oxygenated gasoline based on low-octane hydrocarbon fractions

Mikhail A. Ershov et al.

Summary: Low-carbon fuel is the main trend in oil refining industry development. A novel approach for producing low-carbon high-octane oxygenated environmentally friendly motor gasoline has been proposed, leading to successful production of high-octane environmentally friendly motor gasoline, which can reduce environmental impacts and improve product quality.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Thermodynamics

Effect of the novel continuous variable compression ratio (CVCR) configuration coupled with spark assisted induced ignition (SAII) combustion mode on the performance behavior of the spark ignition engine

Jinhuan Guan et al.

Summary: The study introduces a novel continuous variable compression ratio (CVCR) system in the spark ignition engine, successfully achieving performance optimization in different compression ratio ranges. Results show that increasing compression ratio leads to higher combustion rate, shorter combustion duration, and decreased heat transfer rate.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Creation a novel promising technique for producing an unleaded aviation gasoline 100UL

Mikhail A. Ershov et al.

Summary: This study investigates the influence of aromatic amines, aromatic hydrocarbons, and MTBE on the antiknock characteristics of model blends to create a novel technique for producing unleaded aviation gasoline. The results indicate that the optimal fuel composition contains isooctane, isopentane, toluene, isopropylbenzene, MTBE, m-toluidine, and isopropyl alcohol, with characteristics close to commercial aviation gasoline. Furthermore, the non-hydrocarbon additives concentrations tested in this study have been used on an industrial scale in various countries.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Performance and emissions of renewable blends with OME3-5 and HVO in heavy duty and light duty compression ignition engines

Josefine Preuss et al.

Summary: Interest in using poly(oxymethylene)dimethyl ether (OME3-5) as an alternative to fossil fuels in compression ignition engines has grown due to its potential for reducing soot emissions. Blending OME3-5 with other substances is necessary to prevent damage to engine components. Research showed that blended oxygenated fuels had slightly higher thermal efficiency and shorter combustion duration, leading to reduced soot emissions.

FUEL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Synthesis and characterization of coal fly ash supported zinc oxide catalyst for biodiesel production using used cooking oil as feed

Adeyinka S. Yusuff et al.

Summary: Coal fly ash-zinc oxide composite (CFA/ZnO) was developed and applied as a catalyst in transesterification of used cooking oil (UCO). After optimization, the catalyst showed high productivity in biodiesel synthesis and demonstrated good stability for multiple cycles of reuse.

RENEWABLE ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of FAME production from blends of waste cooking oil and refined palm oil using biomass fly ash as a catalyst

Edgar M. Vargas et al.

Summary: The goal of this study was to optimize the Fatty Acid Methyl Esters (FAME) process by recovering energy from waste cooking oils and biomass fly ash, using response surface methodology and experimental design.

RENEWABLE ENERGY (2021)

Add to Collection

Article Thermodynamics

Impact of acetone-butanol-ethanol (ABE) and gasoline blends on the energy balance of a high-speed spark-ignition engine

Qijun Tang et al.

Summary: This study focused on the energy balance, engine performance, and combustion characteristics when using ABE as an alternative fuel in a high-speed spark-ignition engine. Results indicated that increasing the ABE blend ratio improved the brake thermal efficiency and reduced the percentage of exhaust energy, but also led to increased unburned energy emissions. Therefore, increasing the ABE ratio in ABE/gasoline blends can have various effects on engine operation.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Applied

A new approach for producing mid-ethanol fuels E30 based on low-octane hydrocarbon surrogate blends

Mikhail A. Ershov et al.

Summary: The development of E30 fuel with an ethyl alcohol content of 20-40% has great potential for automotive technology without modifications. By blending bioethanol with low-octane hydrocarbon fractions, the antiknock performance can be significantly improved, offering promising economic parameters for fuel production.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of Ni/Malaysian dolomite catalyst synthesis technique on deoxygenation reaction activity of waste cooking oil

R. S. R. M. Hafriz et al.

Summary: The study compared the performance of nickel-doped Malaysian dolomite catalysts synthesized with different techniques on the deoxygenation of waste cooking oil, with the catalyst prepared using the precipitation method showing superior activity and conversion rates.

RENEWABLE ENERGY (2021)

Add to Collection

Article Polymer Science

Ageing properties of a polyoxymethylene copolymer exposed to (bio) diesel and hydrogenated vegetable oil (HVO) in demanding high temperature conditions

Xin-Feng Wei et al.

Summary: The study found that the aging degree of polyoxymethylene copolymer was highest when exposed to non-polar fuels under high-temperature conditions, with surface powdering observed in samples aged in fuel mixtures. The negative effects from a combination of plasticization, swelling, oxidation, and surface cracks dominated the changes in mechanical properties, leading to reduced stiffness, strength, and extensibility.

POLYMER DEGRADATION AND STABILITY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effective sustainability criteria for bioenergy: Towards the implementation of the european renewable directive II

T. Mai-Moulin et al.

Summary: Sustainability criteria and verification are important tools to ensure sustainable bioenergy development in the EU. The proposed effective sustainability criteria are more extensive than those in the RED II, addressing land use, biodiversity, ecosystems, worker and community rights, and resource efficiency. It is recommended that discussions on various sustainability aspects be coordinated, and considerations for waste definition, indirect land use change measurement, and recognition of competent voluntary schemes be taken at the EU level.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

The effect of the addition of castor oil to residual soybean oil to obtain biodiesel in Brazil: Energy matrix diversification

Bruno Vieira et al.

Summary: This study aimed to obtain biodiesel by mixing frying oil with castor oil in order to reduce dependence on soybean oil. The results showed that after adding castor oil, the acidity and viscosity of biodiesel met the standards, and there was a positive effect on the iodine index.

RENEWABLE ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Evaluation of various waste cooking oils for biodiesel production: A comprehensive analysis of feedstock

Priyanka Sharma et al.

Summary: The diverse fatty acid composition of waste cooking oils makes them suitable for biodiesel production, and the biodiesel derived from them complies with international standards.

WASTE MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Advanced biofuels to decarbonise European transport by 2030: Markets, challenges, and policies that impact their successful market uptake

Calliope Panoutsou et al.

Summary: Advanced biofuels are important options for reducing carbon emissions in transportation, but their production and market uptake remain low due to challenges across the value chain. In order to meet the 2030 targets, immediate action is needed to expand market scale and integrate tailored policy interventions to overcome challenges.

ENERGY STRATEGY REVIEWS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

A novel approach for bio-lubricant production from rapeseed oil-based biodiesel using ultrasound irradiation: Multi-objective optimization

Sara Almasi et al.

Summary: The research focuses on intensifying the production of TMPTE from rapeseed methyl ester using ultrasound irradiation, which significantly improves the process efficiency and reduces energy consumption. Optimization through response surface methodology resulted in a bio-lubricant yield of 82.21% with an energy consumption of 116.7 kJ under specific conditions.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

Add to Collection

Review Energy & Fuels

Recent trends for introducing promising fuel components to enhance the anti-knock quality of gasoline: A systematic review

Tamer M. M. Abdellatief et al.

Summary: Engineers and researchers aim to develop environmentally friendly high-octane gasoline by incorporating organic components to improve low-octane hydrocarbons, addressing global energy and environmental challenges.

FUEL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Production and utilization aspects of waste cooking oil based biodiesel in Pakistan

Haris Mahmood Khan et al.

Summary: The excessive fuel demand in Pakistan has led to a reliance on imported fuel, negatively impacting the economy. This study suggests that utilizing waste cooking oil for biodiesel production could be a sustainable and beneficial alternative for the country. Analyzing through SWOT-AHP, TOWS and PESTLE methods shows that there are strengths and opportunities in implementing waste oil-based biodiesel in Pakistan.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Technology of Producing Petroleum Coking Additives to Replace Coking Coal

Alexey Kameshkov et al.

Summary: This study investigates the potential of producing petroleum coking additives from heavy petroleum residues, with experiments showing that the additives could replace coking coals in the production of metallurgical coke, meeting the required quality indicators.

ACS OMEGA (2021)

Add to Collection

Article Engineering, Chemical

New and green extraction of mercury(I) by pure sunflower oil: Mechanism, kinetics and thermodynamics

Thidarat Wongsawa et al.

Summary: Pure sunflower oil is newly used to extract mercury (Hg(I)) from synthetic water to protect the environment from hazardous metals and promote a benign extraction method. Optimal conditions of influencing parameters have been determined, and the extraction mechanism, reaction order, rate constant, and thermodynamic parameters of Hg(I) extraction have been investigated. Extraction of Hg(I) from other metals in industrial wastewater has also been carried out.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Food Science & Technology

Sesquiterpene lactones in sunflower oil

Otmar Spring

Summary: Sunflower oil is valued for its high content of unsaturated fatty acids, vitamin E, and phytosterols, as well as the presence of bioactive sesquiterpene lactones. Recent analysis found costunolide, dehydrocostuslactone, 8-epixanthatin, and tomentosin in commercially available sunflower oils, highlighting their potential implications for nutrition and cosmetics.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effects of unsaturated fatty acid methyl esters on the oxidation stability of biodiesel determined by gas chromatography-mass spectrometry and information entropy methods

Wenchao Wang et al.

Summary: This study explores the trends of different FAMEs during the oxidation process of biodiesel, finding that methyl linoleate is the main reason for biodiesel oxidation. Through experimental analysis, it was determined that different FAMEs have varying effects on the stability of biodiesel, with methyl linoleate showing the fastest oxidation rate. The study proposed a mathematical equation to calculate the trend of FAMEs and used information entropy theory to calculate the weighting coefficients, with methyl linoleate having a high coefficient of 0.6797.

RENEWABLE ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Lanthanum phosphate foam as novel heterogeneous nanocatalyst for biodiesel production from waste cooking oil

Shahabaldin Rezania et al.

Summary: The study found that LaPO4 foam can be effectively used as a heterogeneous catalyst for producing biodiesel with high catalytic efficiency and stability.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Use of Partition Coefficients in a Hexane-Acetonitrile System in the GC-MS Analysis of Polyaromatic Hydrocarbons in the Example of Delayed Coking Gas Oils

Ignaty Efimov et al.

Summary: The study used the UNIFAC model to calculate the partition coefficients of polycyclic aromatic hydrocarbons and found that methyl derivatives of naphthalene, fluorene, anthracene, and pyrene can be accurately identified by the position of the figurative point on the partition coefficient-retention index plane.

ACS OMEGA (2021)

Add to Collection

Article Thermodynamics

The biodiesel market in Mexico: Challenges and perspectives to overcome in Latin-American countries

Fabiola S. Sosa-Rodriguez et al.

Summary: The current energy policy in Mexico is mainly focused on fossil fuels, hindering the development of the biofuel market. Promoting biodiesel production and consumption in Mexico requires addressing challenges such as technology development, raw material selection, distribution regulation, and commercialization.

ENERGY CONVERSION AND MANAGEMENT-X (2021)

Add to Collection

Review Thermodynamics

Microorganisms-promoted biodiesel production from biomass: A review

Huan Wang et al.

Summary: Biodiesel is considered as a potential substitute for fossil fuel due to its renewability, sustainability, environmentally friendliness, and biodegradability, especially with comparable fuel properties to diesel. However, the chemocatalytic production of biodiesel from plant oils has disadvantages such as high energy consumption and environmentally unfriendly processing. Enzyme-catalyzed biodiesel has attracted more attentions in the past decade due to its sustainability and environmental friendliness.

ENERGY CONVERSION AND MANAGEMENT-X (2021)

Add to Collection

Article Engineering, Chemical

A new process for biodiesel production from tall oil via catalytic distillation

Allan Almeida Albuquerque et al.

Summary: The study investigated the techno-economic feasibility of a new process for biodiesel production from crude tall oil, finding an alternative process that is more economical, environmentally friendly, and technically feasible.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

Add to Collection

Article Environmental Sciences

Carbon, energy and water footprints analysis of rapeseed oil production: A case study in China

Changxing Ji et al.

Summary: The study found that the main environmental impacts of rapeseed oil production come from the direct cultivation processes and the indirect processes of transportation and fertilizer/diesel production. Adjusting industrial layout, improving cultivation in low-yield areas, and reducing pesticide use in the hilly regions of southern China can effectively reduce environmental effects.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A review of sulfonic group bearing porous carbon catalyst for biodiesel production

Zarifah Zailan et al.

Summary: Biodiesel, a renewable alternative fuel, is produced through transesterification and esterification reactions, expedited by high activity and high selectivity heterogeneous catalysts such as sulfonated carbon acid catalyst. This environmentally benign catalyst has the potential to effectively convert free fatty acid to alkyl ester, making it increasingly attractive in the biodiesel manufacturing industry.

RENEWABLE ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable biodiesel production from waste cooking oil: ANN modeling and environmental factor assessment

Fan Fangfang et al.

Summary: This study focused on assessing the sustainability and environmental impact of waste cooking oil biodiesel production, as well as using artificial neural networks to predict biodiesel yield and engine characteristics. The research found that using a 1% catalyst concentration, 9:1 methanol to waste oil molar ratio, 60 minutes reaction time, and 500 rpm mixing intensity can lead to reduced waste generation and positive environmental impacts. The use of artificial neural networks was shown to be effective in simulating and predicting biodiesel yield and engine characteristics.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

Add to Collection

Article Chemistry, Analytical

Rapid screening of low-quality cooking oil by extractive electrospray ionization mass spectrometry

Shuang-Long Wang et al.

Summary: This study successfully established a method for rapid analysis of edible oils using EESI technology, capable of distinguishing different sources of oils, and successfully differentiated 20 brands of cooking oil and five types of illegal cooking oil samples.

CHINESE JOURNAL OF ANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Biodiesel from soybean oil using Porcine pancreas lipase immobilized on a new support: p-nitrobenzyl cellulose xanthate

Rafael Cardoso Rial et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Study of FAME model systems: Database and evaluation of predicting models for biodiesel physical properties

Priscila M. Florido et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Energy & Fuels

Blending Characteristics of Isooctene, MTBE, and TAME as Gasoline Components

M. A. Ershov et al.

ENERGY & FUELS (2020)

Add to Collection

Article Energy & Fuels

Novel strategy to develop the technology of high-octane alternative fuel based on low-octane gasoline Fischer-Tropsch process

Mikhail Ershov et al.

FUEL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Study of the tribological properties the mixture of soybean oil and used (waste) frying oil fatty acid methyl ester under boundary lubrication conditions

Nihayat Hussein Ameen Ameen et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Energy & Fuels

Discovery of a High-Octane Environmental Gasoline Based on the Gasoline Fischer-Tropsch Process

Mikhail A. Ershov et al.

ENERGY & FUELS (2020)

Add to Collection

Article Environmental Sciences

Exhaust emissions from diesel engines fueled by different blends with the addition of nanomodifiers and hydrotreated vegetable oil HVO

Elzbieta Dobrzynska et al.

ENVIRONMENTAL POLLUTION (2020)

Add to Collection

Article Energy & Fuels

Autoignition study of LPG blends with diesel and HVO in a constant-volume combustion chamber

Fermin Oliva et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Characteristics of Isohexene as a Novel Promising High-Octane Gasoline Booster

Mikhail A. Ershov et al.

ENERGY & FUELS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Biodiesel production from refined used cooking oil using co-metal oxide catalyzed transesterification

Nur Fatin Sulaiman et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Energy & Fuels

New recipes for producing a high-octane gasoline based on naphtha from natural gas condensate

Tamer M. M. Abdellatief et al.

FUEL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Partial hydrogenation of a C18:3-rich FAME mixture over Pd/C

Eugenio Quaranta et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of biodiesel production from waste cooking oil using Fe-Montmorillonite K10 by response surface methodology

Syahirah Yahya et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Energy & Fuels

The effect of diesel fuel-tall oil/ethanol/methanol/isopropyl/n-butanol/fusel oil mixtures on engine performance and exhaust emissions

Salih Ozer

FUEL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Combustion characteristics of bamboo lignin from kraft pulping: Influence of washing process

Yang Jianfei et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Sodium modified fluorapatite as a sustainable solid bi-functional catalyst for biodiesel production from rapeseed oil

Younes Essamlali et al.

RENEWABLE ENERGY (2019)

Add to Collection

Article Economics

How to include cooling in the EU Renewable Energy Directive? Strategies and policy implications

Sibylle Braungardt et al.

ENERGY POLICY (2019)

Add to Collection

Article Energy & Fuels

Impacts on industrial-scale market deployment of advanced biofuels and recycled carbon fuels from the EU Renewable Energy Directive II

David Chiaramonti et al.

APPLIED ENERGY (2019)

Add to Collection

Article Energy & Fuels

Impact of HVO blends on modern diesel passenger cars emissions during real world operation

Ricardo Suarez-Bertoa et al.

FUEL (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Solid catalysts obtained from wastes for FAME production using mixtures of refined palm oil and waste cooking oils

Edgar M. Vargas et al.

RENEWABLE ENERGY (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Comparative analysis of reliability of non-destructive methods of strength control of concrete impregnated with vegetable oil: Basalt fiber for increasing the concrete strength

Tareq Sedeq Futaini Gamal et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental investigation of physicochemical properties of diesel, biodiesel and TBK-biodiesel fuels and combustion and emission analysis in CI internal combustion engine

Gyorgy Szabados et al.

RENEWABLE ENERGY (2018)

Add to Collection

Article Thermodynamics

Optimization of enzyme-catalyzed biodiesel production from crude tall oil using Taguchi method

Peter Adewale et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Green & Sustainable Science & Technology

High quality jatropha biodiesel (H-FAME) and its application in a common rail diesel engine

Manida Tongroon et al.

RENEWABLE ENERGY (2017)

Add to Collection

Article Agronomy

WOFOST-GTC: A new model for the simulation of winter rapeseed production and oil quality

C. Gilardelli et al.

FIELD CROPS RESEARCH (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental study of co-digestion of food waste and tall fescue for bio-gas production

Guanyi Chen et al.

RENEWABLE ENERGY (2016)

Add to Collection

Article Energy & Fuels

USING A BIODEGRADABLE POLYMER TO REDUCE THE ACIDITY OF BIODIESEL AND BIODIESEL/PETROLEUM DIESEL FUEL BLENDS

C. G. Tsanaktsidis

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2012)

Add to Collection

Article Chemistry, Applied

Statistical optimization for biodiesel production from rapeseed oil via transesterificaion in supercritical methanol

Hee-Yong Shin et al.

FUEL PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Energy & Fuels

Erratum To the article “Development of Biodiesel from Inedible Feedstock Through Various Production Processes. Review” by Junli Qiul, Xiaohu Fan, and Hongyu Zou, Vol. 47, No. 2, pp. 102–111, May, 2011

Junli Qiu et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2011)

Add to Collection

Article Thermodynamics

Usage of methyl ester of tall oil fatty acids and resinic acids as alternative diesel fuel

All Keskin et al.

ENERGY CONVERSION AND MANAGEMENT (2010)

Add to Collection

Article Chemistry, Physical

Crude tall-oil sodium salts micellization in aqueous solutions studied by static and dynamic light scattering

JMF Nogueira et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.