☆ 4.7 Article

Photo-Curing Kinetics of 3D-Printing Photo-Inks Based on Urethane-Acrylates

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators

Gi-Tae Kim et al.

Summary: This study evaluated the feasibility and performance of three photoinitiators for resin 3D printing in medical device production. The results demonstrated that the TPO-L photoinitiator exhibited excellent biocompatibility and color stability, with acceptable dimensional accuracy for resin 3D printing.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Mechanical Properties and Biocompatibility of Urethane Acrylate-Based 3D-Printed Denture Base Resin

Jy-Jiunn Tzeng et al.

Summary: In this study, five urethane acrylates were used to formulate photopolymer resins for DLP-based 3D printing, with tunable mechanical properties achieved by changing the UA materials and UV exposure times. After 15 min of UV exposure, differences in viscosities were observed among different UA groups. Significant variations in maximum flexural strength, flexural modulus, and Shore hardness values were also noted, indicating the potential of aliphatic urethane acrylate for printable resin design in dental applications.

POLYMERS (2021)

Add to Collection

Article Toxicology

Cytotoxic and cytocompatible comparison among seven photoinitiators-triggered polymers in different tissue cells

Boning Zeng et al.

Summary: The study investigated the cytotoxicity and cytocompatibility of seven commercial and industrial-used photoinitiators, with BAPO showing the highest toxicity, while TPOL and MBF demonstrated the lowest toxicity. The findings suggest that TPOL may be more promising for clinical applications due to its superior cytocompatibility and transparency compared to other photoinitiators.

TOXICOLOGY IN VITRO (2021)

Add to Collection

Article Polymer Science

Functionalized acrylic polyhydroxy urethanes as molecular tool box for Photocurable thermosets and 3D printing

Hannah Buchheit et al.

Summary: Liquid urethane (meth)acrylates, derived from acrylic polyhydroxy urethanes, are tailored in this study to meet the demands of 3D printing applications. By functionalizing hydroxy groups using different methods, tetrafunctional methacrylates are obtained, leading to photo-cured thermosets with improved stiffness and crosslinking density. This molecular UMA design allows for control over functionality and thermoset properties, making it suitable for a wide range of applications in 3D printing.

JOURNAL OF POLYMER SCIENCE (2021)

Add to Collection

Article Robotics

Multimaterial 3D Printing for Microrobotic Mechanisms

Michal Soreni-Harari et al.

SOFT ROBOTICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors

Shuqiang Peng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Polymer Science

3D printing of dual-cure benzoxazine networks

Jeremy J. Weigand et al.

POLYMER (2020)

Add to Collection

Article Polymer Science

Urethane acrylate-based photosensitive resin for three-dimensional printing of stereolithographic elastomer

Yuhao Deng et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Polymer Science

Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC

Fengze Jiang et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

Synthesis of UV Curable, Highly Stretchable, Transparent Poly(urethane-acrylate) Elastomer and Applications Toward Next Generation Technology

Seohyun Kim et al.

MACROMOLECULAR RESEARCH (2020)

Add to Collection

Article Polymer Science

Synthesis and Formulation of PCL-Based Urethane Acrylates for DLP 3D Printers

Hsuan Chen et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Developing non-isocyanate urethane-methacrylate photo-monomers for 3D printing application

Neelima Singh et al.

RSC ADVANCES (2020)

Add to Collection

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Photopolymerization of Acrylated Epoxidized Soybean Oil: A Photocalorimetry-Based Kinetic Study

Adhimoolam Bakthavachalam Kousaalya et al.

ACS OMEGA (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Photopolymerization in 3D Printing

Ali Bagheri et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Engineering, Biomedical

Preparation of new low viscosity urethane dimethacrylates for dental composites

Yuling Xu et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2018)

Add to Collection

Article Polymer Science

UV-curing kinetics and performance development of in situ curable 3D printing materials

Ye Chan Kim et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Polymer Science

The role of molecular structure on impact resistance and bending strength of photocured urethane-dimethacrylate polymer networks

Izabela Barszczewska-Rybarek

POLYMER BULLETIN (2017)

Add to Collection

Article Chemistry, Physical

Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins

Bernhard Steyrer et al.

MATERIALS (2017)

Add to Collection

Article Thermodynamics

Influence of temperature and light intensity on the photocuring process and kinetics parameters of a pigmented UV curable system

Pooneh Kardar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

Add to Collection

Article Thermodynamics

Photopolymerization of bis-aromatic and alicyclic based solid urethane acrylate macromonomer in the presence of large excess of reactive diluent Kinetics and modeling

R. Harikrishna et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

Add to Collection

Article Thermodynamics

Influence of temperature and UV intensity on photo-polymerization reaction studied by photo-DSC

Marius Ciprian Rusu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Structure-property relationships in dimethacrylate networks based on Bis-GMA, UDMA and TEGDMA

Izabela M. Barszczewska-Rybarek

DENTAL MATERIALS (2009)

Add to Collection

Article Engineering, Biomedical

Hydrogen bonding interactions in methacrylate monomers and polymers

Marianela T. Lemon et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)

Add to Collection

Article Polymer Science

Photopolymerization of acid containing monomers:: Real-time monitoring of polymerization rates

Hui Zhou et al.

MACROMOLECULES (2006)

Add to Collection

Article Chemistry, Multidisciplinary

The influence of temperature and photoinitiator concentration on photoinitiated polymerization of diacrylate monomer

L Macarie et al.

CENTRAL EUROPEAN JOURNAL OF CHEMISTRY (2005)

Add to Collection

Article Polymer Science

Influence of hydrogen bonding on photopolymerization rate of hydroxyalkyl acrylates

TY Lee et al.

MACROMOLECULES (2004)

Add to Collection

Article Polymer Science

Photopolymerization of urethane dimethacrylates synthesized via a non-isocyanate route

HJ Assumption et al.

POLYMER (2003)

Add to Collection

Review Polymer Science

Fast monomers: Factors affecting the inherent reactivity of acrylate monomers in photoinitiated acrylate polymerization

JFGA Jansen et al.

MACROMOLECULES (2003)

Add to Collection

Article Engineering, Biomedical

Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins

I Sideridou et al.

BIOMATERIALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.