☆ 4.7 Article

The Influence of Filler Loading and Alkaline Treatment on the Mechanical Properties of Palm Kernel Cake Filler Reinforced Epoxy Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute-Ramie Composites

C. Tezara et al.

Summary: The research analyzed the effect of stacking sequences, fibre orientations, and alkali treatment on the mechanical properties of hybrid jute and ramie reinforced vinyl ester composites. It was found that composites with 0 degrees fibre orientation showed significantly higher tensile and flexural strength, and combining fibre orientation with lower alkali treatment concentration can improve the mechanical properties of the composites.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Textiles

Impact of alkali treatment and fiber length on mechanical properties of new agro waste Lagenaria Siceraria fiber reinforced epoxy composites

Saravanan Nagappan et al.

Summary: Composite laminates prepared with 7mm fiber length and 30wt% of alkali-treated fiber exhibit better mechanical properties compared to other combinations. However, further increase in fiber length and content may cause a decrease in mechanical properties for both treated and untreated LSF-reinforced composites.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Polymer Science

Overview of the Important Factors Influencing the Performance of Eco-Friendly Brake Pads

Agustinus Purna Irawan et al.

Summary: The braking system plays a crucial role in automotive safety. The durability and quality of brake pads are vital for their effective functioning. Asbestos, a harmful material, has been widely used in brake pad manufacturing but efforts are being made to find natural alternatives. This review focuses on analyzing the key parameters affecting brake pad performance and discusses the composition of fillers and fiber reinforcements in polymer composites.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Physiochemical characterization and thermal behaviour of transparent wood composite

Priya Bisht et al.

Summary: This paper describes the fabrication of large size transparent wood composite (TWC) using a two-step lignin modification bleaching process and polymer infiltration. The TWC exhibits high optical transmittance, good mechanical properties, thermal stability, and low thermal conductivity.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mechanical characterization of alkaline treated Ananus Comosus and Musa Sepientum fibers reinforced epoxy hybrid composites

M. Prince et al.

Summary: In this study, hybrid composites were fabricated using treated pineapple and banana fibers, and it was found that the composite with 20% treated pineapple and 10% treated banana exhibited superior mechanical properties.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Engineering, Chemical

Banana Fiber-Reinforced Epoxy Composites: Mechanical Properties and Fire Retardancy

Tuan Anh Nguyen et al.

Summary: The study utilized banana fiber to reinforce composite materials, showing improved mechanical properties up to 20% by weight compared to neat epoxy resin, while maintaining flame retardant and thermal stability, exhibiting eco-friendly characteristics.

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2021)

Add to Collection

Review Engineering, Mechanical

Influence of fillers on polymeric composite during conventional machining processes: a review

R. K. Thakur et al.

Summary: Polymeric composites are highly demanded in various industries for their specific mechanical and physical properties. Research on conventional machining of filler-loaded polymeric composites has been conducted, focusing on the impact of filler percentage on machining responses and the proper filler loading for improved mechanical properties. The study provides a comprehensive review of machining procedures and performance capabilities, along with future perspectives for further development.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

Add to Collection

Article Crystallography

The potential use of green mussel (Perna Viridis) shells for synthetic calcium carbonate polymorphs in biomaterials

R. Ismail et al.

Summary: The study demonstrates a method to recycle green mussel shells into precipitated calcium carbonates (PCC) using a powder processing and calcination-dissolution-precipitation (CDP) technique, showcasing its potential for biomedical applications.

JOURNAL OF CRYSTAL GROWTH (2021)

Add to Collection

Article Mechanics

Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites

Tolera A. Negawo et al.

Summary: The stacking sequence has an impact on the mechanical and dynamic properties of ensete/glass hybrid composites. Mixing glass fibers with ensete fibers improves the mechanical properties of the composites.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Wetting mechanism and interfacial bonding performance of bamboo fiber reinforced epoxy resin composites

Tian Bai et al.

Summary: The polyacrylate-based wetting agent BYK-358N improved the interfacial bonding between bamboo fibers and epoxy matrix. Studies showed that the addition of the wetting agent effectively enhanced the interface compatibility of BF/EP composites, resulting in increased strength and modulus.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Morphological, thermal and mechanical properties of benzoxazine resin reinforced with alkali treated alfa fibers

Wissam Bessa et al.

Summary: This paper investigates a new class of composites using treated alfa fibers to enhance the properties of bisphenol-A aniline benzoxazine resin, showing significant improvements in mechanical, thermal, and thermomechanical features. The addition of treated alfa fibers not only improved the fiber-matrix adhesion but also enhanced the glass transition temperature of the composites.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Polymer Science

The Effect of Hybridisation on Mechanical Properties and Water Absorption Behaviour of Woven Jute/Ramie Reinforced Epoxy Composites

Cionita Tezara et al.

Summary: This study investigates the mechanical properties of epoxy composites reinforced by jute-ramie hybridisation, finding that the hybrid composite outperforms pure jute composites. However, exposure to aqueous environments leads to a reduction in mechanical properties, although they remain higher than those of pure epoxy resin. The appropriate stacking sequence and material selection significantly impact mechanical properties and water absorption behavior of the composites.

POLYMERS (2021)

Add to Collection

Article Polymer Science

The Effect of Alkali Treatment on Physical, Mechanical and Thermal Properties of Kenaf Fiber and Polymer Epoxy Composites

Nur Farhani Ismail et al.

Summary: The research investigates the effect of alkali treatment on kenaf fiber and composite materials, finding that alkali treatment can damage the mechanical properties of both the fiber itself and the resulting composites, leading to decreased tensile strength in the latter. The study also highlights the importance of temperature conditions on composite materials, with treated kenaf fiber showing thermal stability and lower loss values.

POLYMERS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

An investigation on mechanical properties in randomly oriented short natural fiber reinforced composites

Nikunj Patel et al.

Summary: This paper introduces the potential use of composites made from natural fibers in solving industrial environmental impact problems. Discussions were held on the mechanical behavior of different combinations of short natural fibers with reinforced plastics, as well as various mechanical property tests. Different methods used in manufacturing various natural fiber reinforced polyester composites were researched, along with discussions on material properties.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Review Materials Science, Composites

Environmental benign natural fibre reinforced thermoplastic composites: A review

Habib Awais et al.

Summary: Thermoplastic matrix composites play a crucial role in the automotive and aerospace industries, while the use of natural fibers makes materials more environmentally friendly and versatile. Engineering structures can be fabricated using textile technologies, but challenges in material properties need to be addressed.

COMPOSITES PART C: OPEN ACCESS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of cellulosic filler loading on mechanical and thermal properties of date palm seed/vinyl ester composites

Nagaprasad Nagaraj et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Polymer Science

Environmental Degradation of Plastic Composites with Natural Fillers-A Review

Mihai Brebu

POLYMERS (2020)

Add to Collection

Article Food Science & Technology

Novel biodegradable polymer films based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Ceiba pentandra natural fibers for packaging applications

Sandhya Alice Varghese et al.

FOOD PACKAGING AND SHELF LIFE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Study on morphology and mechanical behavior of areca leaf sheath reinforced epoxy composites

R. B. Ashok et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of filler loading on polymer chain confinement and thermomechanical properties of epoxy/boron nitride (h-BN) nanocomposites

Jomon Joy et al.

NEW JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

The Effect of Maleic Anhydride Polyethylene on Mechanical Properties of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites

Januar Parlaungan Siregar et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Date palm reinforced epoxy composites: tensile, impact and morphological properties

N. Saba et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Study of mechanical and abrasive wear properties of lantana camara particulate reinforced epoxy composite

Subhrajit Pradhan et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Forestry

Effect of alkali treatment on wettability and thermal stability of individual bamboo fibers

Hong Chen et al.

JOURNAL OF WOOD SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

The Effect of Alkaline Treatment on the Mechanical Properties of Treated Sugar Palm Yarn Fibre Reinforced Unsaturated Polyester Composites Reinforced with Different Fibre Loadings of Sugar Palm Fibre

Mohd Nurazzi Norizan et al.

SAINS MALAYSIANA (2018)

Add to Collection

Article Polymer Science

Impact of alkali treatment on physics-chemical, thermal, structural and tensile properties of Carica papaya bark fibers

A. Saravanakumaar et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)

Add to Collection

Article Engineering, Environmental

Influence of Selected Treatment on Tensile Properties of Short Pineapple Leaf Fiber Reinforced Tapioca Resin Biopolymer Composites

Jamiluddin Jaafar et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

Add to Collection

Article Polymer Science

Interfacial Compatibility Evaluation on the Fiber Treatment in the Typha Fiber Reinforced Epoxy Composites and Their Effect on the Chemical and Mechanical Properties

Samsul Rizal et al.

POLYMERS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Effect of Alkali Treatment on Mechanical Properties of Rice Husk Flour Reinforced Epoxy Bio-Composite

Neeraj Bisht et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Materials Science, Composites

Properties of rigid polyvinyl chloride foam composites reinforced with different shape fillers

Parisa Khoshnoud et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Effect of chemical treatment on thermal properties of bagasse fiber-reinforced epoxy composite

Varun Mittal et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Thermodynamics

Wood biomass characterization by DSC or FT-IR spectroscopy

Andrzej Brys et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications

Majid Niaz Akhtar et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications

Majid Niaz Akhtar et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)

Add to Collection

Article Engineering, Manufacturing

Synergistic effect of coupling agents and fiber treatments on mechanical properties and moisture absorption of polypropylene-rice husk composites and their foam

Shu-Kai Yeh et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Materials Science, Textiles

Mechanical and Thermal Properties of Epoxy Composites Reinforced with Waste Peanut Shell Powder as a Bio-filler

M. N. Prabhakar et al.

FIBERS AND POLYMERS (2015)

Add to Collection

Review Polymer Science

Rice Husk Filled Polymer Composites

Reza Arjmandi et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

Add to Collection

Article Materials Science, Paper & Wood

Effects of Alkali Treatment on the Microstructure, Composition, and Properties of the Raffia textilis Fiber

Raymond Gentil Elenga et al.

BioResources (2014)

Add to Collection

Article Construction & Building Technology

Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications

Reza Mahjoub et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Engineering, Multidisciplinary

A biodegradable composite material based on polyhydroxybutyrate (PHB) and carnauba fibers

J. D. D. Melo et al.

COMPOSITES PART B-ENGINEERING (2012)

Add to Collection

Article Materials Science, Composites

Effects of wood flour addition and coupling agent content on mechanical properties of recycled polystyrene/wood flour composites

Matheus Poletto et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite

E. Sinha et al.

BULLETIN OF MATERIALS SCIENCE (2009)

Add to Collection

Article Engineering, Manufacturing

Effect of chemical modification on properties of hybrid fiber biocomposites

Maya Jacob John et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

Add to Collection

Article Polymer Science

Performance of pineapple leaf fiber-natural rubber composites: The effect of fiber surface treatments

Natinee Lopattananon et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of alkali treated jute fibres on composite properties

D Ray et al.

BULLETIN OF MATERIALS SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.