Related references
Note: Only part of the references are listed.Optimisation of an in-process lineal dielectric sensor for liquid moulding of carbon fibre composites
T. S. Mesogitis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Compressive behaviour of hollow box pultruded FRP columns with continuous-wound fibres
Omar Alajarmeh et al.
THIN-WALLED STRUCTURES (2021)
Review on Local Buckling of Hollow Box FRP Profiles in Civil Structural Applications
Mohammad Alhawamdeh et al.
POLYMERS (2021)
Sensors for process and structural health monitoring of aerospace composites: A review
Helena Rocha et al.
ENGINEERING STRUCTURES (2021)
Optical fiber sensing for marine environment and marine structural health monitoring: A review
Rui Min et al.
OPTICS AND LASER TECHNOLOGY (2021)
Cure Kinetics Modeling of a High Glass Transition Temperature Epoxy Molding Compound (EMC) Based on Inline Dielectric Analysis
Erick Franieck et al.
POLYMERS (2021)
Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin
Yang Yang et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)
Detection of the key steps during Liquid Resin Infusion manufacturing of a polymer-matrix composite using an in-situ piezoelectric sensor
C. Tuloup et al.
MATERIALS TODAY COMMUNICATIONS (2020)
A Comparison of the Properties of Carbon Fiber Epoxy Composites Produced by Non-autoclave with Vacuum Bag Only Prepreg and Autoclave Process
Sang Yoon Park et al.
APPLIED COMPOSITE MATERIALS (2019)
Mechanical characterization of carbon fiber reinforced plastics specimens for aerospace applications
C. Barile et al.
POLYMER COMPOSITES (2019)
On the use of in-situ piezoelectric sensors for the manufacturing and structural health monitoring of polymer-matrix composites: A literature review
C. Tuloup et al.
COMPOSITE STRUCTURES (2019)
Parameters' monitoring and in-situ instrumentation for resin transfer moulding: A review
Mauricio Torres
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A novel dielectric sensor for process monitoring of carbon fibre composites manufacture
K. I. Tifkitsis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Confusion about infusion: An overview of infusion processes
Arne Hindersmann
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Cure kinetics, morphology development, and rheology of a high-performance carbon-fiber-reinforced epoxy composite
Keletso Mphahlele et al.
COMPOSITES PART B-ENGINEERING (2019)
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Dipen Kumar Rajak et al.
POLYMERS (2019)
Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions
Spiridon Konstantopoulos et al.
ADVANCED MANUFACTURING-POLYMER & COMPOSITES SCIENCE (2019)
Dielectric and Rheological Study of the Molecular Dynamics during the Cure of an Epoxy Resin
Alexander Chaloupka et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)
Pulse Ultrasonic Cure Monitoring of the Pultrusion Process
Patrick Scholle et al.
SENSORS (2018)
Automated In-Process Cure Monitoring of Composite Laminates Using a Guided Wave-Based System With High-Temperature Piezoelectric Transducers
Tyler B. Hudson et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION, DIAGNOSTICS AND PROGNOSTICS OF ENGINEERING SYSTEMS (2018)
Assessment of embedded fiber Bragg gratings for structural health monitoring of composites
Mike Yeager et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2017)
Dielectric cure determination of a thermosetting epoxy composite prepreg
Heejin Park
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Materials for Wind Turbine Blades: An Overview
Leon Mishnaevsky et al.
MATERIALS (2017)
Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing
Jolie Frketic et al.
ADDITIVE MANUFACTURING (2017)
Optimization of the Temperature-Time Curve for the Curing Process of Thermoset Matrix Composites
Dragan Aleksendric et al.
APPLIED COMPOSITE MATERIALS (2016)
Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers
Wahid Ferdous et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Ultrasound monitoring of the cure kinetics of an epoxy resin: Identification, frequency and temperature dependence
Nacef Ghodhbani et al.
POLYMER TESTING (2016)
Design, fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing
Maryam Kahali Moghaddam et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Autoclave cycle optimization for high performance composite parts manufacturing
Luigi Nele et al.
FACTORIES OF THE FUTURE IN THE DIGITAL ENVIRONMENT (2016)
Exploiting temperature measurements for cure monitoring of FRP compositesApplications with thermocouples and infrared thermography
Spiridon Konstantopoulos et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Cure monitoring of CFRP composites by dynamic mechanical analyser
Guillaume Kister et al.
POLYMER TESTING (2015)
In-Situ Cure Monitoring of Wind Turbine Blades by Using Fiber Bragg Grating Sensors and Fresnel Reflection Measurement
Umesh Sampath et al.
SENSORS (2015)
Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts
Dave (Dae-Wook) Kim et al.
International Journal of Naval Architecture and Ocean Engineering (2015)
Uncertainty in the manufacturing of fibrous thermosetting composites: A review
T. S. Mesogitis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrification
D. Kim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Monitoring the production of FRP composites: A review of in-line sensing methods
S. Konstantopoulos et al.
EXPRESS POLYMER LETTERS (2014)
Miniaturized Flexible Interdigital Sensor for In Situ Dielectric Cure Monitoring of Composite Materials
Dmitriy Boll et al.
IEEE SENSORS JOURNAL (2014)
Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures
Sang-Young Kim et al.
INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING (2014)
Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA
Ricky Hardis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Review of structural health and cure monitoring techniques for large wind turbine blades
P. J. Schubel et al.
RENEWABLE ENERGY (2013)
Monitoring the Cure State of Thermosetting Resins by Ultrasound
Francesca Lionetto et al.
MATERIALS (2013)
Study on the curing process for carbon/epoxy composites to reduce thermal residual stress
Seong Su Kim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors
P. Wang et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Liquid Resin Infusion process monitoring with superimposed Fibre Bragg Grating sensor
Emmanuel Marin et al.
POLYMER TESTING (2012)
Ultrasonic characterization of a fluid layer using a broadband transducer
Naim Samet et al.
ULTRASONICS (2012)
OPTIMIZATION OF THE COMPOSITE CURE PROCESS BASED ON THE THERMO-KINETIC MODEL
S. Shevtsov et al.
ADVANCED MATERIALS DESIGN AND MECHANICS (2012)
Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites
Lolei Khoun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Development of the properties of a carbon fibre reinforced thermosetting composite through cure
Nuri Ersoy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Manufacturing requirements in design: The RTM process in aeronautics
S. Mouton et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Fast Fourier Transform IR Characterization of Epoxy GY Systems Crosslinked with Aliphatic and Cycloaliphatic EH Polyamine Adducts
Goran Nikolic et al.
SENSORS (2010)
ON-LINE MEASUREMENT OF THE RESIN INFUSION FLOW VARIABLES USING ARTIFICIAL VISION TECHNOLOGIES
U. Pineda et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process
Nitesh Gupta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Models of Ultrasonic Wave Propagation in Epoxy Materials
Richard E. Challis et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2009)
A Critical Overview of Sensors for Monitoring Polymerizations
Gabriela E. Fonseca et al.
MACROMOLECULAR REACTION ENGINEERING (2009)
In-situ monitoring of the curing of epoxy resins by Raman spectroscopy
L. Merad et al.
POLYMER TESTING (2009)
Online monitoring of thermoset post-curing by dynamic mechanical thermal analysis DMTA
W. Stark et al.
POLYMER TESTING (2009)
Air-coupled ultrasound: A novel technique for monitoring the curing of thermosetting matrices
Francesca Lionetto et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2007)
Cure monitoring and internal strain measurement of 3-D hybrid braided composites using fiber Bragg grating sensor
Kyungho Jung et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Integrated development of CFRP structures for a topless high performance vehicle
Paolo Feraboli et al.
COMPOSITE STRUCTURES (2007)
Optical fibre grating refractometers for resin cure monitoring
S. J. Buggy et al.
JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS (2007)
Effects of tool-embedded dielectric sensors on heat transfer phenomena during composite cure
A. A. Skordos et al.
POLYMER COMPOSITES (2007)
Isoconversional kinetic analysis of thermally stimulated processes in polymers
Sergey Vyazovkin et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2006)
Optical fibre sensor for monitoring flow and resin curing in composites manufacturing
C Lekakou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure-a model for the relationship between curing temperature, degree of cure and electrical impedance
MC Kazilas et al.
POLYMER (2005)
Application of ultrasonics for the process control of Resin Transfer Moulding (RTM)
E Schmachtenberg et al.
POLYMER TESTING (2005)
Process monitoring of aluminum-foam sandwich structures based on thermoplastic fibre-metal laminates using fibre Bragg gratings
KSC Kuang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Temperature field of thick thermoset composite laminates during cure process
ZS Guo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Low-pressure (vacuum infusion) techniques for moulding large composite structures
J Summerscales et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2005)
Ultrasonic dynamic mechanical analysis of polymers
F Lionetto et al.
APPLIED RHEOLOGY (2005)
Phase transformations during the cure of unsaturated polyester resins
F Lionetto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Development of carbon/epoxy structural components for a high performance vehicle
P Feraboli et al.
COMPOSITES PART B-ENGINEERING (2004)
Non-isothermal in situ dielectric cure monitoring for thermosetting matrix composites
DG Lee et al.
JOURNAL OF COMPOSITE MATERIALS (2004)
A study of epoxy-amine cure kinetics by combining isoconversional analysis with temperature modulated DSC and dynamic rheometry
N Sbirrazzuoli et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2003)
Fiber-optic composite cure sensor: monitoring the curing process of composite material based on intensity modulation
CS Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Following network formation in an epoxy/amine system by ultrasound, dielectric, and nuclear magnetic resonance measurements: A comparative study
RE Challis et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Cure cycle design for composite materials using computer simulation and optimisation tools
N Pantelelis et al.
FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH (2003)
Dielectric cure monitoring for glass/polyester prepreg composites
HG Kim et al.
COMPOSITE STRUCTURES (2002)
Learning about epoxy cure mechanisms from isoconversional analysis of DSC data
N Sbirrazzuoli et al.
THERMOCHIMICA ACTA (2002)
Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors
JS Leng et al.
SMART MATERIALS & STRUCTURES (2002)
Thick-sectioned RTM composite manufacturing: Part I - In situ cure model parameter identification and sensing
DJ Michaud et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Model-assisted feedback control for liquid composite molding
JP Dunkers et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
The manufacture of composite structures with a built-in network of piezoceramics
M Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Review of advanced composite structures for naval ships and submarines
AP Mouritz et al.
COMPOSITE STRUCTURES (2001)
The development of a dielectric system for the on-line cure monitoring of the resin transfer moulding process
A McIlhagger et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Share Paper
