☆ 4.6 Article

Controlling Shock-Induced Energy Release Characteristics of PTFE/Al by Adding Oxides

MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Improving the energy release characteristics of PTFE/Al by doping magnesium hydride

Jia-xiang Wu et al.

Summary: Magnesium hydride (MgH2) was doped into PTFE/Al to improve the energy release characteristics of the material system. The dynamic mechanical properties, thermal behavior, reaction energy, and reaction mechanism of the materials were systematically studied. The results showed that MgH2 contributed to enhancing the dynamic mechanical properties of the PTFE/Al system, and the reaction energy and ignition threshold increased with the MgH2 content.

DEFENCE TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Shock-Induced Energy Release Performances of PTFE/Al/Oxide

Ying Yuan et al.

Summary: In this study, oxide materials, such as bismuth trioxide (Bi2O3) and molybdenum trioxide (MoO3), were introduced into polytetrafluoroethylene/aluminum (PTFE/Al) energetic materials to improve their chemical reaction performance. The pressurization characteristics of PTFE/Al/oxide were compared and analyzed. The experiments showed that the addition of 30 wt.% Bi2O3 significantly optimized the energy release efficiency of PTFE/Al, while adding 10 wt.% MoO3 also achieved good results. Mechanism analysis revealed that the addition of oxide materials increased the shock wave intensity in PTFE/Al, but decreased the chemical reaction extent under the corresponding intensity.

MATERIALS (2022)

Add to Collection

Article Engineering, Multidisciplinary

The effect of al particle size on thermal decomposition, mechanical strength and sensitivity of Al/ZrH2/PTFE composite

Jun Zhang et al.

Summary: The study investigated the thermal decomposition, mechanical properties, and impact sensitivity of Al/ZrH2/PTFE with different Al particle sizes. Results showed that the material's yield strength decreased with larger Al particle size, while compressive strength and toughness initially increased and then decreased, reaching optimal values at 12-14 μm. Specimens with the highest strength and toughness exhibited circumferential open cracks and reaction during testing. The impact sensitivity decreased with increasing Al particle size.

DEFENCE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of addition of HTa to Al/PTFE under quasi-static compression on the properties of the developed energetic composite material

Xinxin Ren et al.

Summary: The addition of HTa significantly affected the strength of the composites, with compressive strength first decreasing and then increasing with the increase in HTa content. Furthermore, HTa influenced the bonding force between metal particles and the PTFE matrix, as well as the integrity of the PTFE matrix, resulting in differences in compressive strength.

RSC ADVANCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of multi-oxidants on reaction characteristics of PTFE-Al-XmOY reactive material

Jia Lan et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Thermodynamics

Modified model of Al/PTFE projectile impact reaction energy release considering energy loss

Chuang Chen et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2020)

Add to Collection

Article Polymer Science

Impact Energy Release Characteristics of PTFE/Al/CuO Reactive Materials Measured by a New Energy Release Testing Device

Liangliang Ding et al.

POLYMERS (2019)

Add to Collection

Article Polymer Science

Impact-Induced Reaction Characteristic and the Enhanced Sensitivity of PTFE/Al/Bi2O3 Composites

Ying Yuan et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Ignition of Nanoscale Titanium/Potassium Perchlorate Pyrotechnic Powder: Reaction Mechanism Study

Miles C. Rehwoldt et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

Investigation on the Thermal Behavior, Mechanical Properties and Reaction Characteristics of Al-PTFE Composites Enhanced by Ni Particle

Jiaxiang Wu et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Investigation on the Reaction Energy, Dynamic Mechanical Behaviors, and Impact-Induced Reaction Characteristics of PTFE/Al with Different TiH2 Percentages

Zhongshen Yu et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Thermal Decomposition and Thermal Reaction Process of PTFE/Al/MnO2 Fluorinated Thermite

Jun Zhang et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Applied

Experimental Study on the Reaction Zone Distribution of Impact-Induced Reactive Materials

Shunshan Feng et al.

PROPELLANTS EXPLOSIVES PYROTECHNICS (2017)

Add to Collection

Article Chemistry, Physical

The Energy Release Characteristics of Shock-Induced Chemical Reaction of Al/Ni Composites

Wei Xiong et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Thermodynamics

Nanoenergetics as pressure generator for nontoxic impact primers: Comparison of Al/Bi2O3, Al/CuO, Al/MoO3 nanothermites and Al/PTFE

Ludovic Glavier et al.

COMBUSTION AND FLAME (2015)

Add to Collection

Article Thermodynamics

Correlation of optical emission and pressure generated upon ignition of fully-dense nanocomposite thermite powders

Rayon A. Williams et al.

COMBUSTION AND FLAME (2013)

Add to Collection

Article Physics, Applied

Experimental study on impact-initiated characters of multifunctional energetic structural materials

X. F. Zhang et al.

JOURNAL OF APPLIED PHYSICS (2013)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Layered metal-intermetallic composites in Ti-Al system: strength under static and dynamic load

A. Patselov et al.

CONFERENCE ON MODELING, IDENTIFICATION AND CONTROL (2012)

Add to Collection

Article Physics, Applied

High-pressure equation of state properties of bismuth oxide

D. A. Fredenburg et al.

JOURNAL OF APPLIED PHYSICS (2011)

Add to Collection

Article Physics, Applied

Impact-induced initiation and energy release behavior of reactive materials

Haifu Wang et al.

JOURNAL OF APPLIED PHYSICS (2011)

Add to Collection

Article Chemistry, Physical

Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process

A. Mozaffari et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Chemistry, Physical

Theoretical Study of Elementary Steps in the Reactions between Aluminum and Teflon Fragments under Combustive Environments

Martin Losada et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2009)

Add to Collection

Article Thermodynamics

Exothermic reactions in Al-CuO nanocomposites

Swati M. Umbrajkar et al.

THERMOCHIMICA ACTA (2006)

Add to Collection

Article Thermodynamics

Laser ignition of nanocomposite thermites

JJ Granier et al.

COMBUSTION AND FLAME (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.