Related references
Note: Only part of the references are listed.Strategy of Compatible Use of Jet and Plunger Pump with Chrome Parts in Oil Well
Oleg Bazaluk et al.
ENERGIES (2022)
Development of Analytical Model of Threaded Connection of Tubular Parts of Chrome-Plated Metal Structures
O. Ya. Dubei et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2022)
Tribocorrosion and Abrasive Wear Test of 22MnCrB5 Hot-Formed Steel
Dariusz Ulbrich et al.
MATERIALS (2022)
Effect of TiC on Microstructure and Properties of Wear-Resistant Mo2FeB2 Claddings
Yiqun Sun et al.
MATERIALS (2022)
The Method of Calculating Ploughshares Durability in Agricultural Machines Verified on Plasma-Hardened Parts
Alexandr Gulyarenko et al.
AGRICULTURE-BASEL (2022)
Lifecycle Management of Modular Machine Tools
Ihor Yakovenko et al.
ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021 (2022)
Corrosion characteristics of plasma spray, arc spray, high velocity oxygen fuel, and diamond jet coated 30MnB5 boron alloyed steel in 3.5 wt.% NaCl solution
Bekir Guney et al.
CORROSION REVIEWS (2022)
Effect of Exothermic Addition (CuO - Al) on the Structure, Mechanical Properties and Abrasive Wear Resistance of the Deposited Metal During Self-Shielded Flux-Cored Arc Welding
B. Trembach et al.
Tribology in Industry (2021)
Influence of the Deformation Mode on the Force Conditions of Formation of the Surface Nanostructure of 40Kh Steel
V. Kyryliv et al.
MATERIALS SCIENCE (2021)
Enhanced Resistance of Ti6Al4V Alloy to High-Temperature Oxidation and Corrosion by Forming Alumina Composite Coating
B. N. Mordyuk et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
The Role of Chemical Composition of High-Manganese Cast Steels on Wear of Excavating Chain in Railway Shoulder Bed Ballast Cleaning Machine
Janusz Krawczyk et al.
MATERIALS (2021)
Stress Analysis in Damaged Pipeline with Composite Coating
Maciej Dutkiewicz et al.
APPLIED SCIENCES-BASEL (2021)
Simulation of Diffusion Processes in Chemical and Thermal Processing of Machine Parts
Kateryna Kostyk et al.
PROCESSES (2021)
A Technology of Hydrocarbon Fluid Production Intensification by Productive Stratum Drainage Zone Reaming
Oleg Bazaluk et al.
ENERGIES (2021)
Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades
Oleg Bazaluk et al.
ENERGIES (2021)
The Effect of Sandblasting on Properties and Structures of the DC03/1.0347, DC04/1.0338, DC05/1.0312, and DD14/1.0389 Steels for Deep Drawing
Janusz Krawczyk et al.
MATERIALS (2021)
Clad TiCrC(Ni) Composite Powders for Thermal Spraying of Coatings
M. S. Storozhenko et al.
POWDER METALLURGY AND METAL CERAMICS (2021)
DIRECT METHOD OF CALCULATING NONSTATIONARY TEMPERATURE FIELDS IN BODIES OF BASIC GEOMETRIC SHAPES
R. M. Tatsii et al.
JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS (2021)
On the Influence of Facing on Strength of Solids with Surface Defects
I. P. Shatskyi et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2020)
Influence of Flexible Coating on the Limit Equilibrium of a Spherical Shell with Meridional Crack
I. P. Shatskyi et al.
MATERIALS SCIENCE (2020)
Exploring Efficiencies: Examining the Possibility of Decreasing the Size of the Briquettes Used as the Batch in the Electric Arc Furnace Dust Processing Line
Michal Bembenek
SUSTAINABILITY (2020)
Analysis of Causes and Preventing Ways of Early Workability Loss of Three-Cone Rock Bit Cutters
R. S. Yakym et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2020)
Study on the Self-Organization of an Fe-Mn-C-B Coating during Friction with Surface-Active Lubricant
Marcin Barszcz et al.
MATERIALS (2020)
Influence of the core filler composition on the recovery of alloying elements during the self-shielded flux-cored arc welding
Bohdan Trembach et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Thermodynamic Prediction of Phase Composition of Transition Metals High-Entropy Alloys
A. B. Melnick et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2020)
The Wear on Roller Press Rollers Made of 20Cr4/1.7027 Steel under Conditions of Copper Concentrate Briquetting
Michal Bembenek et al.
MATERIALS (2020)
Principles of development of product lifecycle management system for threaded connections based on the Python programming language
V. B. Kopei et al.
INTERNATIONAL CONFERENCE ON APPLIED SCIENCES (2020)
Investigation of the technological damageability of castings at the stage of design and technological preparation of the machine Life Cycle
Y. M. Kusyi et al.
INTERNATIONAL CONFERENCE ON APPLIED SCIENCES (2020)
Structure and Corrosion Resistance of Vacuum-Arc Multi-period CrN/Cu Coatings
Hanna Postelnyk et al.
ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1 (2020)
Concept of the Software for Materials Selection Using .NET Technologies
Sergey Dobrotvorskiy et al.
ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019) (2020)
Stressed state of laminated interference-absorption filter under local loading
L. Ya Ropyak et al.
FUNCTIONAL MATERIALS (2020)
Friction Behavior of Electric-Spark Coatings Under the Conditions of Boundary Lubrication
V. M. Holubets et al.
MATERIALS SCIENCE (2020)
THERMODYNAMIC APPROACH TO THE DEVELOPMENT AND SELECTION OF HARDFACING MATERIALS IN ENERGY INDUSTRY
Thaer Shihab et al.
MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING (2020)
ANALYSIS OF MATERIALS AND MODERN TECHNOLOGIES FOR PDC DRILL BIT MANUFACTURING
L. Ya Ropyak et al.
USPEKHI FIZIKI METALLOV-PROGRESS IN PHYSICS OF METALS (2020)
IMPROVEMENT OF ABRASION RESISTANCE OF PRODUCTION EQUIPMENT WEAR PARTS BY HARDFACING WITH FLUX-CORED WIRES CONTAINING BORON CARBIDE/METAL POWDER REACTION MIXTURES
Oleksandr Ivanov et al.
MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING (2020)
SCIENTIFIC RATIONALE FOR THE MOVABLE PIPELINE TECHNOLOGY FOR TRANSPORTING CNG BY SEA
Oleh Mandryk et al.
MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING (2020)
THE CORROSION AND WEAR RESISTANCE OF LASER AND MAG WELD DEPOSITS
Anna Guzanova et al.
ACTA METALLURGICA SLOVACA (2020)
Modeling of Stress-Strain State of Piping Systems with Erosion and Corrosion Wear
Ya Doroshenko et al.
PHYSICS AND CHEMISTRY OF SOLID STATE (2020)
The effect of V addition on microstructure and tribological properties of Fe-Ti-C claddings produced by gas tungsten arc welding
M. Rafiei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Analysis of Interaction of Thin Coating with an Abrasive Using One-Dimensional Model
L. Ya. Ropyak et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2019)
Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing
Juan Guillermo Santos Macias et al.
SCRIPTA MATERIALIA (2019)
Regularities of Wear of Metal-Polymer Friction Couples Under the Influence of Tribocurrents
S. Kryshtopa et al.
MATERIALS SCIENCE (2019)
Characterization of ZrN coating low-temperature deposited on the preliminary Ar+ ions treated 2024 Al-alloy
M. A. Vasylyev et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Assessment of in-service degradation of gas pipeline steel taking into account susceptibility to stress corrosion cracking
Olha Zvirko et al.
6TH INTERNATIONAL CONFERENCE FRACTURE MECHANICS OF MATERIALS AND STRUCTURAL INTEGRITY (FMSI 2019) (2019)
Corrosion Resistance of VC-FeCr and VC-FeCrC Coatings Obtained by Supersonic Gas-Flame Spraying
M. M. Student et al.
MATERIALS SCIENCE (2019)
INFLUENCE OF THE POROSITY OF A PLASMA-ELECTROLYTIC COATING ON THE CORROSION RESISTANCE OF D16 ALLOY
M. M. Student et al.
MATERIALS SCIENCE (2019)
Effect of uniaxial stress on the electrochemical properties of graphene with point defects
Pawel Szroeder et al.
APPLIED SURFACE SCIENCE (2018)
Effect of Molybdenum on the Wear Properties of (Ti,Mo)C-TiB2-Mo2B Particles Reinforced Fe-Based Laser Cladding Composite Coatings
M. Zhang et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying
J. Cizek et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Structure and Wear Resistance of VC-FeCr and VC-FeCrC Coatings Obtained by Supersonic Flame Spraying
M. M. Student et al.
MATERIALS SCIENCE (2018)
SURFACE HARDENING OF HS6-5-2 QUICK-CUTTING STEEL IN THE COURSE OF CHEMICAL THERMAL TREATMENT
M. Pashechko et al.
MATERIALS SCIENCE (2017)
Surface Hardening of 40KH Steel by Electric-Spark Alloying
S. I. Kryshtopa et al.
MATERIALS SCIENCE (2017)
Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr
M. Pashechko et al.
POWDER METALLURGY AND METAL CERAMICS (2017)
The effect of Ta substitution for Nb on the microstructure and wear resistance of an Fe-Cr-C hardfacing alloy
Farzad Sadeghi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Experimental investigation and thermodynamic calculation of the B-Fe-Mo ternary system
Xuemei Ou Yang et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2017)
INCREASE IN THE RELIABILITY AND DURABILITY OF METAL IMPULSE SEALS. PART 3
V. B. Tarel'nik et al.
CHEMICAL AND PETROLEUM ENGINEERING (2017)
As-built surface layer characterization and fatigue behavior of DMLS Ti6A14V
R. Konecna et al.
3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017) (2017)
Thermodynamic modelling of the ternary B-Mo-Ti system with refined B-Mo description
V. T. Witusiewicz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of the deposition parameters on the phase-structure state, hardness, and tribological characteristics of Mo2N/CrN vacuum-arc multilayer coatings
V. M. Beresnev et al.
JOURNAL OF SUPERHARD MATERIALS (2016)
Micromechanical and Electrophysical Properties of Al2O3 Nanostructured Dielectric Coatings on Plane Heating Elements
Z. A. Duryahina et al.
MATERIALS SCIENCE (2016)
Formation of Structure and Properties of Composite Coatings TiB$_{2}$—TiC—Steel Obtained by Overlapping of Electric-Arc Surfacing and Self-Propagating High-Temperature Synthesis
D. L. Lutsak et al.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII (2016)
Effect of a small addition of Ti on the Fe-based coating by laser cladding
Wenyan Gao et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Friction reduction by nanothin titanium layers on anodized alumina
Tadas Matijosius et al.
SURFACE & COATINGS TECHNOLOGY (2016)
SUBSTANTIATING PARAMETERS OF STRATIFICATION CAVITIES FORMATION IN THE ROOF ROCKS DURING UNDERGROUND COAL GASIFICATION
V. Falshtynskyi et al.
MINING OF MINERAL DEPOSITS (2016)
Friction stir processed Al-TiO2 surface composites: Anodising behaviour and optical appearance
Visweswara Chakravarthy Gudla et al.
APPLIED SURFACE SCIENCE (2015)
Methods of cutting for workpieces of hardmetal and cBN-based polycrystalline superhard material
A. F. Salenko et al.
JOURNAL OF SUPERHARD MATERIALS (2015)
Finite element modelling of rock mass cutting by cutters for PDC drill bits
T. O. Pryhorovska et al.
PETROLEUM EXPLORATION AND DEVELOPMENT (2015)
Optimal Control of Blending and Melting of Copper Concentrates
Ulzhan Imanbekova et al.
PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2015 (2015)
Wear behavior-hardness-microstructure relation of Fe-Cr-C and Fe-Cr-C-B based hardfacing alloys
N. Yuksel et al.
MATERIALS & DESIGN (2014)
Morphology and distribution of M7C3 and TiC in situ synthesized in plasma surfacing
Su Yun-hai et al.
ADVANCED MATERIALS AND PROCESSES II, PTS 1-3 (2012)
METHODICAL SPECIFIC FEATURES OF TRIBOCORROSION INVESTIGATIONS
V. A. Vynar et al.
MATERIALS SCIENCE (2011)
Effects of vanadium additive on structure property and tribological performance of high chromium cast iron hardfacing metal
Xiaowen Qi et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Application of three-electrode electrolytic cell to evaluate thin films of vegetable and mineral oils
Svajus J. Asadauskas et al.
TRIBOLOGY INTERNATIONAL (2011)
The Effect of Microstructure on Properties of Fe-Cr-C-Nb/Ti Hardfacing Alloy
Wenbo Tang et al.
MECHANICS, SOLID STATE AND ENGINEERING MATERIALS (2011)
EFFECT OF LASER MICROALLOYING WITH NIOBIUM ON THE WEAR RESISTANCE OF STAINLESS STEELS
V. V. Shyrokov et al.
MATERIALS SCIENCE (2009)
Development of an iron-based hardfacing material reinforced with Fe-(TiW)C composite powder
E. O. Correa et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Microstructure and wear properties of Fe-based hardfacing coating reinforced by TiC particles
XH Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Share Paper
