4.6 Article

Effect of the Longitudinal Tensile Creep on the Stiffness of Radiata Pine (Pinus radiata D. Don)

Related references

Note: Only part of the references are listed.
Article Materials Science, Paper & Wood

Thermo-hydro-mechanical densification of hemlock

Poorya Kooche Baghy et al.

Summary: The study found that temperature level, densification time, and type of pre-treatment were significant factors in Thermo-Hydro-Mechanical densification. Densification significantly improved the density, hardness, and abrasion resistance of western hemlock, while also darkening it by about 200% as a possible aesthetic feature.

INTERNATIONAL WOOD PRODUCTS JOURNAL (2021)

Article Agricultural Engineering

Performance improvement of radiata pine wood by combining impregnation of furfuryl alcohol resin and densification for making fretboard materials

Meihong Liu et al.

Summary: By utilizing a synergistic modification technology of FA impregnation treatment and densification treatment, this study successfully improved the properties of radiata pine wood to be suitable for string instrument fretboard manufacturing, providing new insights for the high value utilization of fast-growing plantation wood in musical instrument production.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Multidisciplinary Sciences

Nanostructural deformation of high-stiffness spruce wood under tension

Lynne H. Thomas et al.

Summary: Research has shown that the cellulose microfibrils in conifer wood stretch together under tension, with stress relaxation facilitated by water. The role of hemicelluloses in affecting the stretching and relaxation behavior of cellulose microfibrils was also observed. Additionally, it was found that lignin and hemicellulosic glucomannans may contribute to stress transfer between microfibril bundles on a larger scale.

SCIENTIFIC REPORTS (2021)

Article Construction & Building Technology

Physicochemical properties of thermally treated poplar wood in silicone and rapeseed oils: A comparative study

Akbar Mastouri et al.

Summary: The study demonstrated that heat treatment in silicone oil can effectively improve the water-related properties of poplar wood, by changing the chemical composition and surface wettability, resulting in lower water absorption and volumetric swelling. The results suggest that silicone oil heat treatment has a higher potential in enhancing the durability of poplar wood compared to rapeseed oil heat treatment.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Materials Science, Paper & Wood

ELASTIC CONSTANTS OF CHILEAN Pinus radiata USING ULTRASOUND

Erik Baradit et al.

Summary: This study determined the elastic constants of Pinus radiata using ultrasound technology, showing that ultrasound is a reliable tool. While the longitudinal elastic constant values were similar between ultrasound and mechanical testing, significant differences were found in the radial and tangential moduli. The ultrasound technique also revealed the symmetry of the shear modulus and demonstrated the elastic anisotropy of the wood samples.

MADERAS-CIENCIA Y TECNOLOGIA (2021)

Article Chemistry, Physical

The Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane

Magdalena Broda et al.

Summary: The treatment with methyltrimethoxysilane effectively stabilizes wood dimensions and enhances mechanical strength, while also reducing wood hygroscopicity. However, it also has a plasticizing effect on the treated wood.

MATERIALS (2021)

Review Materials Science, Multidisciplinary

Heat-Treated Wood as a Substrate for Coatings, Weathering of Heat-Treated Wood, and Coating Performance on Heat-Treated Wood

Vlatka Jirous-Rajkovic et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)

Article Materials Science, Paper & Wood

Improvement of Wood Densification Process via Enhancing Steam Diffusion, Distribution, and Evaporation

Chang-Hua Fang et al.

BIORESOURCES (2019)

Review Forestry

Climate change and the regulation of wood formation in trees by temperature

Shahanara Begum et al.

TREES-STRUCTURE AND FUNCTION (2018)

Article Multidisciplinary Sciences

Processing bulk natural wood into a high-performance structural material

Jianwei Song et al.

NATURE (2018)

Article Engineering, Chemical

Effect of wood drying and heat modification on some physical and mechanical properties of radiata pine

Rene Herrera-Diaz et al.

DRYING TECHNOLOGY (2018)

Article Forestry

Thermo-hydro-mechanical behaviour of acetylated wood: swelling, compression set recovery and mouldability

Pierre-Yves Lallart et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2017)

Article Forestry

Wood modification technologies - a review

Dick Sandberg et al.

IFOREST-BIOGEOSCIENCES AND FORESTRY (2017)

Article Materials Science, Paper & Wood

Creep Behavior of Wood Plasticized by Moisture and Temperature

Fangyuan Jin et al.

BioResources (2016)

Article Materials Science, Paper & Wood

The Furfurylation of Wood: A Nanomechanical Study of Modified Wood Cells

Wanju Li et al.

BioResources (2016)

Review Chemistry, Multidisciplinary

Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications

Hongli Zhu et al.

CHEMICAL REVIEWS (2016)

Article Materials Science, Paper & Wood

Evaluation of Weathering of Furfurylated Wood Decks after a 3-year Outdoor Exposure in Greece

George Mantanis et al.

DRVNA INDUSTRIJA (2015)

Review Plant Sciences

Molecular control of wood formation in trees

Zheng-Hua Ye et al.

JOURNAL OF EXPERIMENTAL BOTANY (2015)

Article Forestry

Modelling spiral grain angle variation in New Zealand-grown radiata pine

John R. Moore et al.

NEW ZEALAND JOURNAL OF FORESTRY SCIENCE (2015)

Article Agricultural Engineering

An evaluation of properties of four heat treated wood species

Haci Ismail Kesik et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

Article Materials Science, Multidisciplinary

Characterization of heat treated wood species

Trisna Priadi et al.

MATERIALS & DESIGN (2013)

Article Forestry

Experimental micromechanical characterisation of wood cell walls

Michaela Eder et al.

WOOD SCIENCE AND TECHNOLOGY (2013)

Review Materials Science, Paper & Wood

Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products

Dick Sandberg et al.

WOOD MATERIAL SCIENCE & ENGINEERING (2013)

Article Forestry

Densification of wood veneers by compression combined with heat and steam

Chang-Hua Fang et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)

Article Forestry

Fibre morphological effects on mechano-sorptive creep

Fang Dong et al.

WOOD SCIENCE AND TECHNOLOGY (2010)

Article Engineering, Manufacturing

Mechanical response of longleaf pine to variation in microfibril angle, chemistry associated wavelengths, density, and radial position

B. K. Via et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Article Nanoscience & Nanotechnology

An experimental investigation of the fatigue behavior of sisal fibers

Flavio de Andrade Silva et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Forestry

Surface modification of wood using friction

Lauri Rautkari et al.

WOOD SCIENCE AND TECHNOLOGY (2009)

Article Materials Science, Multidisciplinary

Micromechanical modelling of mechanical behaviour and strength of wood: State-of-the-art review

Leon Mishnaevsky et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Article Materials Science, Paper & Wood

Mechanical behaviour of Quebec wood species heat-treated using ThermoWood process

Jun Li Shi et al.

HOLZ ALS ROH-UND WERKSTOFF (2007)

Article Materials Science, Paper & Wood

Chemical analysis of heat treated softwoods

Michiel J. Boonstra et al.

HOLZ ALS ROH-UND WERKSTOFF (2006)

Article Materials Science, Paper & Wood

Effect of oil type, temperature and time on moisture properties of hot oil-treated wood

JY Wang et al.

HOLZ ALS ROH-UND WERKSTOFF (2005)

Article Forestry

Effect of moisture content on the longitudinal tensile creep behavior of wood

Y Kojima et al.

JOURNAL OF WOOD SCIENCE (2005)

Article Biology

Micromechanical understanding of the cell-wall structure

L Salmén

COMPTES RENDUS BIOLOGIES (2004)

Article Forestry

Effect of microfibril angle on the longitudinal tensile creep behavior of wood

Y Kojima et al.

JOURNAL OF WOOD SCIENCE (2004)

Article Chemistry, Physical

Cell-wall recovery after irreversible deformation of wood

J Keckes et al.

NATURE MATERIALS (2003)

Article Engineering, Manufacturing

Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase

C Baley

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)

Article Materials Science, Multidisciplinary

Cell wall properties and their effects on the mechanical properties of fibers

A Bergander et al.

JOURNAL OF MATERIALS SCIENCE (2002)