4.8 Review

Understanding of Sodium Storage Mechanism in Hard Carbons: Ongoing Development under Debate

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Regulating the Interlayer Spacings of Hard Carbon Nanofibers Enables Enhanced Pore Filling Sodium Storage

Congcong Cai et al.

Summary: The research involves designing hard carbon nanofibers with tunable interlayer spacings, which exhibit good sodium storage performance. The study also reveals the reasons for plateau-capacity degradation and provides insights for constructing high-performance hard carbon anode materials.

SMALL (2022)

Article Chemistry, Multidisciplinary

In Situ (Operando) Electrochemical Dilatometry as a Method to Distinguish Charge Storage Mechanisms and Metal Plating Processes for Sodium and Lithium Ions in Hard Carbon Battery Electrodes

Ines Escher et al.

Summary: In situ (operando) electrochemical dilatometry (ECD) provides insights into the expansion/shrinkage of electrodes during cell cycling. The study identifies a three-step mechanism for sodium storage in hard carbon electrodes, involving insertion, pore filling, and plating, with the last step absent in lithium storage. Additionally, the type of binder used significantly impacts the dilatometry results, affecting electrode expansion and initial Coulomb efficiency.

ADVANCED MATERIALS INTERFACES (2022)

Review Chemistry, Physical

Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na-Ion Batteries beyond Li-Ion and K-Ion Counterparts

Ling-Fei Zhao et al.

Summary: Hard carbon is recognized as a promising anode material for alkali metal-ion batteries, particularly showing outstanding performance in sodium-ion batteries, with in-depth research and commercial prototype demonstration. Challenges and research perspectives for future development and early commercialization of HC-based sodium-ion batteries are also discussed comprehensively.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

X-Ray Spectromicroscopy Investigation of Heterogeneous Sodiation in Hard Carbon Nanosheets with Vertically Oriented (002) Planes

Xuehai Tan et al.

Summary: This study fabricates unique HC nanosheets with vertically oriented (002) planes from self-assembled cellulose nanocrystal sheets, and investigates the sodiation mechanisms using synchrotron scanning transmission X-ray microscopy (STXM) coupled with analytical transmission electron microscopy (TEM). The results reveal that the sodiation in HC initiates heterogeneously, with multiple propagation fronts proceeding simultaneously, eventually merging into larger aggregates. By identifying intercalation as the dominant sodium storage mechanism in the model HC, the findings highlight the importance of engineering the graphene layer orientation and the structural heterogeneity of edge sites to enhance the performances.

SMALL (2021)

Article Chemistry, Physical

Probing the Energy Storage Mechanism of Quasi-Metallic Na in Hard Carbon for Sodium-Ion Batteries

Zhaohua Wang et al.

Summary: This study reveals the sodium storage mechanism in hard carbon through theoretical calculations and experimental analysis, particularly focusing on the formation of quasi-metallic sodium and quasi-ionic bond between sodium and carbon. The composition of fully sodiated hard carbon and its corresponding capacity in sodium-ion batteries were estimated, providing important insights into sodium behavior in hard carbon.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Carbon Anode Materials: A Detailed Comparison between Na-ion and K-ion Batteries

Lupeng Zhang et al.

Summary: This article discusses the development status and comparative analysis of carbon anode materials for SIBs and PIBs, emphasizing the importance of understanding the storage/release mechanisms of Na+/K+ in carbon materials for achieving ideal performance.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Applied

The recent progress of pitch-based carbon anodes in sodium-ion batteries

Mingchi Jiang et al.

Summary: Sodium-ion batteries (SIBs) are gaining attention as alternatives to lithium-ion batteries for large-scale energy storage, with carbon materials considered competitive anodes due to their low cost and structural stability. Pitch, a raw material with high carbon content and low cost, is ideal for producing carbon materials. However, the ordered microstructures of pitch-based carbon negatively impact sodium ion storage. Efforts to improve sodium storage performance include morphology adjustments, heteroatoms doping, fabricating heterostructures, and increasing disorder. This review provides insight into developing low-cost, high-performance pitch-based carbon anodes for SIBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Storage Mechanism of Alkali Metal Ions in the Hard Carbon Anode: an Electrochemical Viewpoint

Yong Huang et al.

Summary: The study reveals different storage mechanisms for Li, Na, and K in hard carbon anodes, with a slope at high voltage and a plateau at low voltage observed. The findings not only offer a fundamental understanding of alkali metal ions storage mechanisms in hard carbons but also help develop and design innovative electrode materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Elucidating the Mechanism of Fast Na Storage Kinetics in Ether Electrolytes for Hard Carbon Anodes

Ruiqi Dong et al.

Summary: The sodium storage performance of hard carbon in ether electrolytes is superior, attributed to a unique solvated Na+ and Na+ co-intercalation mechanism in designed monodispersed HC nanospheres. Additionally, a thin solid electrolyte interphase film formed in ether electrolytes facilitates Na+ transportation and results in a high initial Coulombic efficiency.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Correlating Local Structure and Sodium Storage in Hard Carbon Anodes: Insights from Pair Distribution Function Analysis and Solid-State NMR

Joshua M. Stratford et al.

Summary: Hard carbons are the primary candidate anode materials for sodium-ion batteries, with the sodium-insertion mechanisms and local atomic environments still being debated. Research findings indicate that the local structure of carbons is described by bilayers of curved graphene fragments, with fragment size and curvature correlated with storage capacity. Different hard carbons show variations in performance at high and low voltages, suggesting that the impact of local atomic structure and microstructure on storage capacity should be considered when engineering these materials.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Multidisciplinary

Effect of Local Atomic Structure on Sodium Ion Storage in Hard Amorphous Carbon

Jiuhui Han et al.

Summary: The study reported quantitative measurements of sodium storage in low-temperature dealloyed hard carbon with a tunable structure, revealing different mechanisms of sodium adsorption and intercalation in various voltage regions. This provides essential insights for designing advanced sodium-ion battery anodes.

NANO LETTERS (2021)

Review Chemistry, Physical

Hard Carbon Anodes for Next-Generation Li-Ion Batteries: Review and Perspective

Lijing Xie et al.

Summary: Hard carbons, with their enriched microcrystalline structure, have attracted attention as a promising anode material for high-energy LIBs, but face challenges such as low initial efficiency and capacity issues. Current research efforts are focused on addressing these challenges to enable practical application in next-generation batteries.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Advanced cobalt-free cathode materials for sodium-ion batteries

Shiyong Chu et al.

Summary: This review comprehensively summarizes recent advances in high-performance cobalt-free cathode materials for advanced SIBs, analyzing the conflicts of structural/electrochemical stability with intrinsic insufficiencies of cobalt-free cathode materials, and discussing strategies for constructing stable cobalt-free cathode materials.

CHEMICAL SOCIETY REVIEWS (2021)

Review Chemistry, Physical

Recent Advances in Heterostructured Carbon Materials as Anodes for Sodium-Ion Batteries

Rui Zhao et al.

Summary: Carbon materials have garnered extensive attention as anodes for sodium-ion batteries due to their abundant resources, low cost, and diverse structure. Different structural configurations of carbon materials exhibit distinct electrochemical properties, paving the way for robust carbon-based heterostructures with enhanced performances in Na-ion storage. This review comprehensively discusses the fabrication and benefits of various carbon-based heterostructures, as well as explores key obstacles and potential production of such structures for high-performance carbon-based anode materials for SIBs.

SMALL STRUCTURES (2021)

Review Chemistry, Multidisciplinary

Hard carbon for sodium storage: mechanism and optimization strategies toward commercialization

Dequan Chen et al.

Summary: Sodium-ion batteries have potential in grid-scale energy storage, with hard carbon as a promising anode material for commercialization, requiring in-depth understanding of storage mechanism and performance optimization. Future research and commercialization efforts can focus on increasing specific capacity, optimizing rate performance, and enhancing initial coulombic efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Proceedings Paper Materials Science, Multidisciplinary

Exploring Na-ion technological advances: Pathways from energy to power

M. Arnaiz et al.

Summary: Na-ion battery (NIB) technology is gaining popularity due to its flexibility and low cost, with significant advances being made in the field. Future developments include research into nascent Na-based technological advances and the exploration of Na-ion capacitors.

MATERIALS TODAY-PROCEEDINGS (2021)

Review Chemistry, Multidisciplinary

Untangling the respective effects of heteroatom-doped carbon materials in batteries, supercapacitors and the ORR to design high performance materials

Xin Feng et al.

Summary: Heteroatom-doped carbon materials have been widely studied for various applications such as batteries, supercapacitors, and the oxygen reduction reaction. By controlling the content and types of heteroatom-containing reagents, the physical and chemical properties of the materials can be adjusted to enhance their electrochemical performance. This review comprehensively analyzes the relevant features of HDCMs and provides guidance for the design of more efficient materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Hard carbon porosity revealed by the adsorption of multiple gas probe molecules (N2, Ar, CO2, O2 and H2)

Adrian Beda et al.

Summary: The porosity of hard carbon materials is commonly evaluated by nitrogen adsorption, but this study found that a series of complementary gases such as N2, Ar, CO2, O2 and H2 can provide a more comprehensive understanding of the pore structure of hard carbons, with O2 showing particularly high adsorbed volumes.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Toward commercial-level mass-loading electrodes for supercapacitors: opportunities, challenges and perspectives

Wei Guo et al.

Summary: Supercapacitors, with fast charging/discharging rate and long lifespan, show potential for next generation energy supply. However, a significant gap between research and practical requirements hinders progress, calling for new techniques to meet commercial needs. While advancements have been made in tailor-made electrode materials, challenges remain in achieving commercial-level mass loading.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Multidisciplinary

A Functionalized Carbon Surface for High-Performance Sodium-Ion Storage

Qiaowei Lin et al.

SMALL (2020)

Article Chemistry, Physical

Mechanism of Sodium Storage in Hard Carbon: An X-Ray Scattering Analysis

Yusuke Morikawa et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Revealing the Intercalation Mechanisms of Lithium, Sodium, and Potassium in Hard Carbon

Stevanus Alvin et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Insights into Lithium and Sodium Storage in Porous Carbon

Gaojing Yang et al.

NANO LETTERS (2020)

Article Chemistry, Physical

Surface-dominated storage of heteroatoms-doping hard carbon for sodium-ion batteries

Qianzheng Jin et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Elucidating the Sodiation Mechanism in Hard Carbon by Operando Raman Spectroscopy

Julia S. Weaving et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Rational Route for Increasing Intercalation Capacity of Hard Carbons as Sodium-Ion Battery Anodes

Yuto Katsuyama et al.

CHEMSUSCHEM (2020)

Article Chemistry, Physical

Sodium-Ion Batteries Paving the Way for Grid Energy Storage

Hayley S. Hirsh et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Physical

Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage

Yu Li et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Physical

From Li-Ion Batteries toward Na-Ion Chemistries: Challenges and Opportunities

Kudakwashe Chayambuka et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Sodium Storage Mechanism Investigations through Structural Changes in Hard Carbons

Hande Alptekin et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Extended low-voltage plateau capacity of hard carbon spheres anode for sodium ion batteries

Xiang Zhang et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Multidisciplinary

A revised mechanistic model for sodium insertion in hard carbons

Heather Au et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design

Xiaofei Yang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Chemistry, Physical

High-Capacity Hard Carbon Synthesized from Macroporous Phenolic Resin for Sodium-Ion and Potassium-Ion Battery

Azusa Kamiyama et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

Bridging the academic and industrial metrics for next-generation practical batteries

Yuliang Cao et al.

NATURE NANOTECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

Recent Progress in Rechargeable Sodium-Ion Batteries: toward High-Power Applications

Xiangjun Pu et al.

SMALL (2019)

Article Chemistry, Physical

Revealing sodium ion storage mechanism in hard carbon

Stevanus Alvin et al.

CARBON (2019)

Article Chemistry, Physical

Correlation of Structure and Performance of Hard Carbons as Anodes for Sodium Ion Batteries

Aurora Gomez-Martin et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Multidisciplinary

MXene-Bonded Flexible Hard Carbon Film as Anode for Stable Na/K-Ion Storage

Ning Sun et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Physical

Tuning the Closed Pore Structure of Hard Carbons with the Highest Na Storage Capacity

Qingshi Meng et al.

ACS ENERGY LETTERS (2019)

Editorial Material Chemistry, Physical

2019 Nobel Prize for the Li-Ion Batteries and New Opportunities and Challenges in Na-Ion Batteries

Yong-Sheng Hu et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

Hard Carbon as Sodium-Ion Battery Anodes: Progress and Challenges

Biwei Xiao et al.

CHEMSUSCHEM (2019)

Article Materials Science, Multidisciplinary

Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry

Xinwei Dou et al.

MATERIALS TODAY (2019)

Article Chemistry, Physical

Defect-Rich Soft Carbon Porous Nanosheets for Fast and High-Capacity Sodium-Ion Storage

Xuhui Yao et al.

ADVANCED ENERGY MATERIALS (2019)

Review Chemistry, Multidisciplinary

Peering into Alloy Anodes for Sodium-Ion Batteries: Current Trends, Challenges, and Opportunities

Huiteng Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage

Tiefeng Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Sodium storage in hard carbon with curved graphene platelets as the basic structural units

Ke Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Design and fabrication of carbon dots for energy conversion and storage

Chao Hu et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Multidisciplinary

Intercalation chemistry of graphite: alkali metal ions and beyond

Yuqi Li et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Materials Science, Multidisciplinary

Alloy Anodes for Rechargeable Alkali-Metal Batteries: Progress and Challenge

He Liu et al.

ACS MATERIALS LETTERS (2019)

Article Chemistry, Physical

Sodium-Ion Batteries: From Academic Research to Practical Commercialization

Jianqiu Deng et al.

ADVANCED ENERGY MATERIALS (2018)

Article Nanoscience & Nanotechnology

Phosphorus-Doped Hard Carbon Nanofibers Prepared by Electrospinning as an Anode in Sodium-Ion Batteries

Feng Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

N-Doping and Defective Nanographitic Domain Coupled Hard Carbon Nanoshells for High Performance Lithium/Sodium Storage

Shifei Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Physical

Defective Hard Carbon Anode for Na-Ion Batteries

Zhifei Li et al.

CHEMISTRY OF MATERIALS (2018)

Article Electrochemistry

Biowaste Lignin-Based Carbonaceous Materials as Anodes for Na-Ion Batteries

Cyril Marino et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Review Materials Science, Multidisciplinary

Internal structure - Na storage mechanisms - Electrochemical performance relations in carbons

Clement Bommier et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Article Chemistry, Physical

Boosting Fast Sodium Storage of a Large-Scalable Carbon Anode with an Ultralong Cycle Life

Ji Qian et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Elucidation of the Sodium-Storage Mechanism in Hard Carbons

Panxing Bai et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Physical

Solid-State Sodium Batteries

Chenglong Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Physical

Synthesizing higher-capacity hard-carbons from cellulose for Na- and K-ion batteries

Hijiri Yamamoto et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Insight into Sodium Insertion and the Storage Mechanism in Hard Carbon

M. Anji Reddy et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Physical

High-Performance Hard Carbon Anode: Tunable Local Structures and Sodium Storage Mechanism

Yu Jin et al.

ACS APPLIED ENERGY MATERIALS (2018)

Editorial Material Chemistry, Physical

Next Generation Batteries: Aim for the Future

Shulei Chou et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Mechanism of Na-Ion Storage in Hard Carbon Anodes Revealed by Heteroatom Doping

Zhifei Li et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Physical

Carbon Anode Materials for Advanced Sodium-Ion Batteries

Hongshuai Hou et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Synthesis of hard carbon from argan shells for Na-ion batteries

Mouad Dahbi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Phosphorus and oxygen dual-doped graphene as superior anode material for room-temperature potassium-ion batteries

Guangyao Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Nanoscience & Nanotechnology

Coupled Carbonization Strategy toward Advanced Hard Carbon for High-Energy Sodium-Ion Battery

Huimin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Correlation Between Microstructure and Na Storage Behavior in Hard Carbon

Biao Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Review Chemistry, Multidisciplinary

Na-Ion Battery Anodes: Materials and Electrochemistry

Wei Luo et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Article Chemistry, Multidisciplinary

Mechanistic insights into sodium storage in hard carbon anodes using local structure probes

Joshua M. Stratford et al.

CHEMICAL COMMUNICATIONS (2016)

Article Chemistry, Physical

Combination of solid state NMR and DFT calculation to elucidate the state of sodium in hard carbon electrodes

Ryohei Morita et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

High Capacity of Hard Carbon Anode in Na-Ion Batteries Unlocked by POx Doping

Zhifei Li et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Physical

Commercial carbon molecular sieves as a high performance anode for sodium-ion batteries

Si-Wei Zhang et al.

ENERGY STORAGE MATERIALS (2016)

Article Chemistry, Multidisciplinary

High-Performance Sodium Ion Batteries Based on a 3D Anode from Nitrogen-Doped Graphene Foams

Jiantie Xu et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Multidisciplinary

A high performance sulfur-doped disordered carbon anode for sodium ion batteries

Wei Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Review Chemistry, Multidisciplinary

Recent Development on Anodes for Na-Ion Batteries

Clement Bommier et al.

ISRAEL JOURNAL OF CHEMISTRY (2015)

Review Electrochemistry

Review-Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries

E. Irisarri et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Chemistry, Multidisciplinary

New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon

Clement Bommier et al.

NANO LETTERS (2015)

Article Chemistry, Physical

Ab initio study of sodium intercalation into disordered carbon

Ping-chun Tsai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Facile synthesis of high performance hard carbon anode materials for sodium ion batteries

Ning Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Electrochemistry

Hard Carbon Anodes for Na-Ion Batteries: Toward a Practical Use

George Hasegawa et al.

CHEMELECTROCHEM (2015)

Article Chemistry, Multidisciplinary

Electrochemically Expandable Soft Carbon as Anodes for Na-Ion Batteries

Wei Luo et al.

ACS CENTRAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels

Elmira Memarzadeh Lotfabad et al.

ACS NANO (2014)

Article Chemistry, Physical

Negative electrodes for Na-ion batteries

Mouad Dahbi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Article Chemistry, Physical

Boron-doped graphene as a promising anode for Na-ion batteries

Chen Ling et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Article Chemistry, Physical

Biomass derived hard carbon used as a high performance anode material for sodium ion batteries

Kun-lei Hong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Review Chemistry, Multidisciplinary

Update on Na-based battery materials. A growing research path

Veronica Palomares et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Review Chemistry, Multidisciplinary

Room-temperature stationary sodium-ion batteries for large-scale electric energy storage

Huilin Pan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Review Nanoscience & Nanotechnology

Raman spectroscopy as a versatile tool for studying the properties of graphene

Andrea C. Ferrari et al.

NATURE NANOTECHNOLOGY (2013)

Article Chemistry, Multidisciplinary

Na-ion batteries, recent advances and present challenges to become low cost energy storage systems

Veronica Palomares et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Physical

Comparative XRD, Raman, and TEM Study on Graphitization of PBO-Derived Carbon Fibers

M. Beatriz Vazquez-Santos et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Article Chemistry, Multidisciplinary

Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications

Yuliang Cao et al.

NANO LETTERS (2012)

Article Chemistry, Multidisciplinary

Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard-Carbon Electrodes and Application to Na-Ion Batteries

Shinichi Komaba et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Article Chemistry, Multidisciplinary

Room-temperature sodium-ion batteries: Improving the rate capability of carbon anode materials by templating strategies

Sebastian Wenzel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Article Electrochemistry

The mechanisms of lithium and sodium insertion in carbon materials

DA Stevens et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Article Electrochemistry

High capacity anode materials for rechargeable sodium-ion batteries

DA Stevens et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)