☆ 4.8 Article

Low-Tortuous MXene (TiNbC) Accordion Arrays Enabled Fast Ion Diffusion and Charge Transfer in Dendrite-Free Lithium Metal Anodes

ADVANCED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Lithium/Graphene Composite Anode with 3D Structural LiF Protection Layer for High-Performance Lithium Metal Batteries

Zhenyuan Liu et al.

Summary: In this study, a facile method is proposed to construct a 3D structural lithium metal composite anode, which improves the utilization of lithium and suppresses the accumulation of dead lithium by the existence of a LiF protection layer. The experimental results demonstrate the potential application of this novel composite anode in lithium metal batteries.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

One-Step, Vacuum-Assisted Construction of Micrometer-Sized Nanoporous Silicon Confined by Uniform Two-Dimensional N-Doped Carbon toward Advanced Li Ion and MXene-Based Li Metal Batteries

Yongling An et al.

Summary: This study developed a vacuum-assisted reactive carbon coating technique to produce micrometer-sized nanoporous silicon confined by homogeneous carbon nanosheets. The synthetic conditions were adjusted to control the structure and properties of the material, and the material exhibited excellent cycling performance and application potential in lithium-ion batteries.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing a Stable Interface Layer by Tailoring Solvation Chemistry in Carbonate Electrolytes for High-Performance Lithium-Metal Batteries

Zhihong Piao et al.

Summary: By adding lithium nitrate additive and a small amount of tetramethylurea as a multifunctional cosolvent to a commercial carbonate electrolyte, it is possible to improve the performance and cycle life of lithium-metal batteries, providing a simple and effective way to extend the use of commercial carbonate electrolytes for next-generation battery systems.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient diffusion of superdense lithium via atomic channels for dendrite-free lithium-metal batteries

Shiyuan Zhou et al.

Summary: A new strategy is proposed in this article to address dendrite growth issue in lithium metal batteries by promoting the diffusion of lithium in graphite material through the construction of atomic channels, achieving efficient energy storage.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Suspension electrolyte with modified Li+ solvation environment for lithium metal batteries

Mun Sek Kim et al.

Summary: Designing a suspension electrolyte that modifies the Li+ solvation environment and creates inorganic-rich solid-electrolyte interphases on a Li anode has been achieved in this study. By investigating Li2O nanoparticles suspended in liquid electrolytes, the roles of Li2O in the electrolyte and interphases have been elucidated. The application of the suspension electrolyte design in conventional and advanced electrolytes has demonstrated improved performance and stability.

NATURE MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries

Yujing Liu et al.

Summary: In this study, self-assembled monolayers (SAMs) were utilized to control electrolyte degradation and solid-electrolyte interphase (SEI) formation in lithium metal batteries (LMBs), resulting in improved cycling performance and lifespan.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Capturing the swelling of solid-electrolyte interphase in lithium metal batteries

Zewen Zhang et al.

Summary: Characterizing liquid-solid interfaces remains challenging due to the limitations of existing tools. This study adopts a thin film vitrification method to preserve and study the structure and chemistry of key interfaces in batteries. The research reveals substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anodes in different electrolytes, with the swelling behavior correlated to battery performance.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Lithiophilic Carbon Nanofiber/Graphene Nanosheet Composite Scaffold Prepared by a Scalable and Controllable Biofabrication Method for Ultrastable Dendrite-Free Lithium-Metal Anodes

Zongmin Hu et al.

Summary: The BC-CNF@rGO composite scaffold, derived from bacterial cellulose, effectively addresses the issue of dendrite growth in lithium metal batteries, enabling efficient lithium deposition and stripping, improving cycling stability, and offering a new design and fabrication strategy for high-performance lithium metal batteries.

SMALL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

High-Polarity Fluoroalkyl Ether Electrolyte Enables Solvation-Free Li+ Transfer for High-Rate Lithium Metal Batteries

Liwei Dong et al.

Summary: In this study, a new electrolyte system based on fluoroalkyl ether THE and ether electrolytes has been designed to enhance the performance of lithium metal batteries, including long-cycle and high-rate capabilities. The electrolyte not only reduces Li+ interaction and solvation in ether electrolytes, but also enables solvation-free Li+ transfer with significantly improved transference at the electrolyte/anode interface. Additionally, the electrolyte suppresses dendrite formation and stabilizes the solid electrolyte interphase layer, leading to exceptional cyclic performances over 5000 cycles at 10 C.

ADVANCED SCIENCE (2022)

Add to Collection

Review Chemistry, Physical

Liquid electrolyte: The nexus of practical lithium metal batteries

Hansen Wang et al.

Summary: The specific energy of commercial lithium-ion batteries is approaching the theoretical limit. The development of high energy density Li metal batteries is needed for future consumer electronics and electric vehicle markets. Electrolyte engineering can address the issues associated with Li metal batteries, but there are still gaps between the performance of current Li metal batteries and commercial requirements. Further improvements require systematic analysis of existing electrolyte design methodologies.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Tortuosity Thick Electrodes with Active Materials Gradient Design for Enhanced Energy Storage

Jingyi Wu et al.

Summary: This study develops a low-tortuosity electrode with an active material gradient structure, which improves the energy density and rate capabilities of batteries. It provides insights into optimizing electrode microstructures for enhanced energy storage.

ACS NANO (2022)

Add to Collection

Article Engineering, Environmental

Toward uniform Li plating/stripping by optimizing Li-ion transport and nucleation of engineered graphene aerogel

Jiahui Zhou et al.

Summary: The research introduces a new design of using graphene aerogel as the host for Li metal anodes, which achieves homogeneous Li-ion nucleation and improved cycling stability through optimized channel structures and lithiophilic binding sites. The results demonstrate the great potential of this graphene-hosted Li anode in terms of electrochemical performance and cycling life.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Processing robust lithium metal anode for high-security batteries: A minireview

Zhenkang Wang et al.

Summary: This review critically discusses the current status of research on processing robust lithium metal anodes, summarized the strategies to fabricate robust lithium metal anodes with emphasis on the impact on energy density, and proposed future trends and challenges.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Advances in carbon materials for stable lithium metal batteries

Cheng-Bin Jin et al.

Summary: Carbon materials play a crucial role in stabilizing lithium metal batteries due to their lightweight, high conductivity, and porous nature. Various approaches have been developed to suppress dendrite growth and regulate the uniformity of the solid electrolyte interface, contributing to the enhancement of battery performance. However, there are limitations to the use of carbon materials, which need to be considered for further development in improving lithium metal batteries.

NEW CARBON MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Harnessing the Unique Features of 2D Materials toward Dendrite-free Metal Anodes

Zhenjiang Cao et al.

Summary: 2D materials have been widely studied for engineering metal anodes to address issues such as capacity decay and safety concerns, playing a crucial role in the deposition and stripping processes of metals. Their ultrathin structure and tunable active sites provide an attractive solution for metal anodes.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Composite Lithium Metal Anodes with Lithiophilic and Low-Tortuosity Scaffold Enabling Ultrahigh Currents and Capacities in Carbonate Electrolytes

Jingyi Wu et al.

Summary: The composite Li metal anode supported by TiO2/PVP nanofibers can effectively address the dendrite growth issue, improve the safety and cyclability of batteries, and achieve stable cycling at high areal capacities and current densities. This unique structure enables stable cycling under ultrahigh currents and ultra-deep plating/stripping, showing potential for balancing high-energy density and high-power density in Li metal batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Creating New Battery Configuration Associated with the Functions of Primary and Rechargeable Lithium Metal Batteries

Hao Chen et al.

Summary: A new rechargeable three-electrode battery configuration has been developed, involving lithium, fluorinated graphite, and sulfur electrodes, which can transform the initial middle-fluorinated graphite cathode into a hybrid lithium anode. This rechargeable battery shows low overpotential, long cycle life, and high energy density based on the total mass of the three-electrode materials, with the excess lithium in the system being replenished in situ to further extend the lifespan.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Tortuosity Modulation toward High-Energy and High-Power Lithium Metal Batteries

Yongzheng Shi et al.

Summary: This article reveals the correlation between the electrochemical kinetics and tortuosity of LMBs, discusses the importance of low-tortuous structures for improving high-power LMBs, and summarizes material design strategies to regulate lithium-ion flux, electric field, and lithium nucleation.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Template-Sacrificed Hot Fusion Construction and Nanoseed Modification of 3D Porous Copper Nanoscaffold Host for Stable-Cycling Lithium Metal Anodes

Huinan Lin et al.

Summary: A new method for constructing Au/Cu nanoscaffold as an effective Li metal hosting material to solve the dendrite growth and unstable interface issues during Li plating/stripping process is proposed in this work. The symmetric cells based on this nanoscaffold exhibit stable performance, demonstrating great potential for high-performance lithium metal batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Lithium Host:Advanced architecture components for lithium metal anode

Yifeng Cheng et al.

Summary: Lithium metal batteries have attracted widespread attention due to the increasing demand for high energy and power energy storage devices. However, issues such as dendrite formation, low coulombic efficiency, and fast electrolyte consumption have hindered their practical applications for decades. Addressing these issues by tuning the lithium deposition through structuring a host for Li metal anode is seen as an efficient method to improve the electrochemical performance and safety of lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Recent Progress of Porous Materials in Lithium-Metal Batteries

Yao Liu et al.

Summary: This paper discusses the application of porous materials in lithium-metal batteries, summarizes the key progress and challenges in LMBs, and proposes the need for further research on porous materials to achieve better electrochemical performance in the future.

SMALL STRUCTURES (2021)

Add to Collection

Article Multidisciplinary Sciences

Layered nanocomposites by shear-flow-induced alignment of nanosheets

Chuangqi Zhao et al.

NATURE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Advances in the Design of 3D-Structured Electrode Materials for Lithium-Metal Anodes

Sunwoo Park et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Lithium Metal-Based Composite: An Emerging Material for Next-Generation Batteries

Ying Huang et al.

MATTER (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Towards practical lithium-metal anodes

Xin Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

3D printing dendrite-free lithium anodes based on the nucleated MXene arrays

Kai Shen et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Tortuosity Effects in Lithium-Metal Host Anodes

Hao Chen et al.

JOULE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Lithium Metal Anodes Realized by Lithiophilic 3D Porous Current Collectors for Constructing High-Energy Lithium-Sulfur Batteries

Fei Pei et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Lithium Anodes with Ultra-Deep Stripping and Plating Properties Based on Vertically Oriented Lithium-Copper-Lithium Arrays

Zhenjiang Cao et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable Lithium Metal Batteries Enabled by Regulating the Solvation of Lithium Ions in Nonaqueous Electrolytes

Xue-Qiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

A Material Perspective of Rechargeable Metallic Lithium Anodes

Bin Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Xiulin Fan et al.

CHEM (2018)

Add to Collection

Article Multidisciplinary Sciences

Engineering stable interfaces for three-dimensional lithium metal anodes

Jin Xie et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Electrochemistry

Fluorinating Interphases

Chunsheng Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Physics, Condensed Matter

Controllable magnitude and anisotropy of the electrical conductivity of Hf3C2O2 MXene

Xian-Hu Zha et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Nature-inspired superwettability systems

Mingjie Liu et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes

Rui Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes

Qinbai Yun et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Two-dimensional molybdenum carbides: potential thermoelectric materials of the MXene family

Mohammad Khazaei et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.