☆ 4.8 Article

Stable 24.29%-Efficiency FA0.85MA0.15PbI3 Perovskite Solar Cells Enabled by Methyl Haloacetate-Lead Dimer Complex

ADVANCED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Favorable grain growth of thermally stable formamidinium-methylammonium perovskite solar cells by hydrazine chloride

Luyao Wang et al.

Summary: In this study, hydrazine chloride (HACl) as an additive was used to promote favorable grain orientation during the growth of perovskite crystals, leading to improved efficiency of perovskite solar cells. HACl was found to reduce grain boundaries, enhance lattice structure, and significantly decrease carrier recombination, resulting in higher power conversion efficiency of the solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

A Key 2D Intermediate Phase for Stable High-Efficiency CsPbI2Br Perovskite Solar Cells

Shaomin Yang et al.

Summary: In this study, a low-dimensional intermediate-assisted growth (LDIAG) method was developed to deposit high-quality and stable CsPbI2Br film in ambient atmosphere by introducing imidazole halide (IMX) to control nucleation and growth kinetics. The solar cell efficiency was improved to 17.26% using this method, showcasing potential for high-performance inorganic perovskite solar cells formed under ambient conditions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Graded 2D/3D (CF3-PEA)2FA0.85MA0.15Pb2I7/FA0.85MA0.15PbI3 heterojunction for stable perovskite solar cell with an efficiency over 23.0%

Yuan Cai et al.

Summary: By replacing small cations with bulkier organic cations containing long alkyl chains or benzene rings to form a thin two-dimensional passivation layer on three-dimensional perovskite, the efficiency and stability of perovskite solar cells can be significantly improved. The unique structure and properties of the 2D layer create better chemical and thermal stability, leading to enhanced efficiency and durability of the PSCs.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

A sulfur-rich small molecule as a bifunctional interfacial layer for stable perovskite solar cells with efficiencies exceeding 22%

Ming-Hua Li et al.

Summary: A sulfur-rich two-dimensional small molecule, SMe-TATPyr, was reported as a bifunctional layer to efficiently improve the efficiency and stability of perovskite solar cells. The power conversion efficiency of PSCs was distinctly increased from 20.4% to 22.3%, and the stability of unencapsulated PSCs was enhanced to retain 95% of the initial efficiency after storage for 1500 hours.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Xiaojing Gu et al.

Summary: Iodine vacancies and undercoordinated Pb2+ are the main causes of nonradiative charge recombination in all-inorganic perovskite films, while passivation with histamine (HA) significantly reduces surface trap density and prolongs charge lifetime, leading to an increased solar cell efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Energy & Fuels

Improving Moisture/Thermal Stability and Efficiency of CH3NH3PbI3-Based Perovskite Solar Cells via Gentle Butyl Acrylate Additive Strategy

Yonghui Chen et al.

Summary: In order to enhance the efficiency and stability of CH3NH3PbI3-based PSCs, a new additive - butyl acrylate is introduced, which improves the power conversion efficiency and moisture/thermal stability of the photovoltaic devices without the need for thermal treatment. The PSCs with butyl acrylate additive show significantly improved PCE and stability, providing a promising approach for the commercialization of PSCs.

SOLAR RRL (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Qingshun Dong et al.

Summary: This study introduces a new approach by incorporating an interpenetrating structure at the electron-transporting-layer interface in perovskite solar cells, enhancing their operational stability and mechanical robustness.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bottom-Up Quasi-Epitaxial Growth of Hybrid Perovskite from Solution Process-Achieving High-Efficiency Solar Cells via Template -Guided Crystallization

Hengkai Zhang et al.

Summary: A universal solution-processed bottom-up quasi-epitaxial growth method for highly oriented alpha-FAPbI(3) perovskite film is reported in this study. In situ GIWAXS was used to visualize the intermediate phase formation at the bottom of the film, serving as a guiding template for subsequent annealing process. The epitaxially grown BAFAMA perovskite film showed increased crystallinity and stability in solar cell applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Marked Passivation Effect of Naphthalene-1,8-Dicarboximides in High-Performance Perovskite Solar Cells

Zhihao Zhang et al.

Summary: This study uses two structurally similar polyaromatic molecules to improve the lifetime and efficiency of perovskite solar cells, successfully designing a more effective passivator and achieving higher device efficiency.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Molecular Dipole-Enabled Defect Passivation and Control of Energy-Level Alignment for High-Efficiency Perovskite Solar Cells

Bing Wang et al.

Summary: This study successfully enhanced the performance of perovskite solar cells by passivating defects and modulating energy level alignment at the interface using polar chlorine-terminated silane molecules.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

p-Type Carbon Dots for Effective Surface Optimization for Near-Record-Efficiency CsPbI2Br Solar Cells

Xi Guo et al.

Summary: In this study, functionalized p-type blue carbon dots were used as an interface passivation layer to enhance the efficiency and stability of an all-inorganic perovskite solar cell. The blue carbon dots effectively passivated defects and formed a P-N junction with the perovskite, providing efficient pathways for charge transport. Additionally, the blue carbon dots increased the hydrophobicity of the perovskite film, leading to improved stability of the solar cell.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

Fluoroethylamine Engineering for Effective Passivation to Attain 23.4% Efficiency Perovskite Solar Cells with Superior Stability

Hang Su et al.

Summary: The study introduces fluoroethylamine (FEA) into perovskite films to passivate defects, finding that the distribution of fluorine atoms in the molecule affects the passivation effect and performance of the perovskite film. These FEA passivated perovskite films showed improved carrier-lifetime, suppressed nonradiative recombination, and enhanced hydrophobicity, with different fluorine distribution patterns leading to varied efficiency and stability outcomes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

The Main Progress of Perovskite Solar Cells in 2020-2021

Tianhao Wu et al.

Summary: Perovskite solar cells have been recognized as a promising photovoltaic technology with high efficiency and low manufacturing cost. Recent progress has focused on increasing efficiency and stability, as well as developing lead-free perovskites to advance commercialization. The main advancements in 2020 and 2021 include improvements in efficiency, stability, perovskite-based tandem devices, and lead-free technology, with discussions on module development and challenges in practical application.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A Special Additive Enables All Cations and Anions Passivation for Stable Perovskite Solar Cells with Efficiency over 23%

Wenjing Zhao et al.

Summary: By using the BBF complex as an additive, passivation of both cation and anion defects in perovskite films was achieved, reducing trap density and recombination processes, improving crystalline quality, and enhancing energy-level alignment, leading to higher power conversion efficiency and stability for perovskite solar cells.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Energy & Fuels

The critical role of composition-dependent intragrain planar defects in the performance of MA1-xFAxPbI3 perovskite solar cells

Wei Li et al.

Summary: The study shows that controlling intragrain defects can improve the performance of perovskite solar cells, and reducing the density of intragrain planar defects can enhance the device performance.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability

Qingshun Dong et al.

Summary: The growth of a low-dimensional metal-halide perovskite capping layer on flexible perovskite solar cells simultaneously improves power conversion efficiency, operational stability, and bending durability, attributing to enhanced photocarriers extraction, environmental protection, and surface flaw sealing.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Star-polymer multidentate-cross-linking strategy for superior operational stability of inverted perovskite solar cells at high efficiency

Qi Cao et al.

Summary: Metal halide perovskites have gained significant attention for their excellent optoelectronic properties, with the efficiency and stability of perovskite solar cells being major research focuses. The multidentate-cross-linking strategy has successfully enhanced device efficiency and improved operational stability, offering a new direction for commercial applications.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Beneficial effects of cesium acetate in the sequential deposition method for perovskite solar cells

Byeong Jo Kim et al.

Summary: The addition of cesium acetate (CsAc) effectively stabilizes FAMAPbI(3) perovskite, reduces trap density, extends carrier lifetime, and improves the performance and stability of perovskite solar cells in ambient conditions. The study provides insights into the crucial role of dopants and synthesis precursors in the efficiency and stability of perovskite solar cells.

NANOSCALE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bi-functional interfaces by poly(ionic liquid) treatment in efficient pin and nip perovskite solar cells

Pietro Caprioglio et al.

Summary: The study highlights the use of poly(ionic liquid) (PIL) to introduce a multi-functional interlayer in perovskite solar cells, leading to significant improvements in efficiency and stability across different perovskite compositions and architectures. By passivating surface traps and enhancing charge extraction, the PIL-treated devices achieved outstanding V-OC and FF values, with the best devices reaching conversion efficiencies up to 21.4%. Moreover, the PIL treatment also enhanced stability during power tracking and maintained efficiencies after long-term storage, showcasing the versatility and effectiveness of this methodology.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells

Abd. Rashid bin Mohd Yusoff et al.

Summary: The surface, interfaces, and grain boundaries of halide perovskite films play critical roles in achieving and maintaining high solar cell performance. Various defect engineering approaches are utilized to improve the efficiency and stability of perovskite solar cells, with a focus on passivating materials and process engineering techniques.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Illumination Durability and High-Efficiency Sn-Based Perovskite Solar Cell under Coordinated Control of Phenylhydrazine and Halogen Ions

Chengbo Wang et al.

Summary: The illumination stability and efficiency of Sn-based perovskites have been substantially improved by synergistically introducing phenylhydrazine cation and halogen anions, resulting in a device with a power conversion efficiency of 13.4% and excellent long-term durability. This method offers a universal approach for enhancing the performance of Sn-based perovskites.

MATTER (2021)

Add to Collection

Review Chemistry, Physical

New Strategies for Defect Passivation in High-Efficiency Perovskite Solar Cells

Seckin Akin et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MACl-Induced Intermediate Engineering for High-Performance Mixed-Cation Perovskite Solar Cells

Muhammad Mateen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled n-Doping in Air-Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%

Yu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency

Hongwei Zhu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Atomistic understanding on molecular halide perovskite/organic/TiO2 interface with bifunctional interfacial modifier: A case study on halogen bond and carboxylic acid group

Lei Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Precursor Engineering for Ambient-Compatible Antisolvent-Free Fabrication of High-Efficiency CsPbI2Br Perovskite Solar Cells

Chenyang Duan et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Perovskite Solar Cells Based on Compact, Smooth FA0.1MA0.9PbI3 Film with Efficiency Exceeding 22%

Ayman Maqsood et al.

NANOSCALE RESEARCH LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent Engineering Using a Volatile Solid for Highly Efficient and Stable Perovskite Solar Cells

Guohua Wu et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Device Performances of MAFACsPb(IxBr1-x) Perovskite Solar Cells with Dual-Functional 2-Chloroethyl Acrylate Additives

Se-Phin Cho et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An Efficient Approach to Fabricate Air-Stable Perovskite Solar Cells via Addition of a Self-Polymerizing Ionic Liquid

Rui Xia et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

2D Cs2PbI2Cl2 Nanosheets for Holistic Passivation of Inorganic CsPbI2Br Perovskite Solar Cells for Improved Efficiency and Stability

Shaomin Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Efficient Defect Passivation for Perovskite Solar Cells by Controlling the Electron Density Distribution of Donor-π-Acceptor Molecules

Tianhao Wu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Enhanced stability in cesium assisted hybrid 2D/3D-perovskite thin films and solar cells prepared in ambient humidity

Nasir Ali et al.

SOLAR ENERGY (2019)

Add to Collection

Article Chemistry, Physical

A Novel Anion Doping for Stable CsPbI2Br Perovskite Solar Cells with an Efficiency of 15.56% and an Open Circuit Voltage of 1.30 V

Huan Zhao et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide

Hanul Min et al.

SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Novel Surface Passivation for Stable FA0.85MA0.15PbI3 Perovskite Solar Cells with 21.6% Efficiency

Fang Qian et al.

SOLAR RRL (2019)

Add to Collection

Article Energy & Fuels

Simultaneous Cesium and Acetate Coalloying Improves Efficiency and Stability of FA0.85MA0.15PbI3 Perovskite Solar Cell with an Efficiency of 21.95%

Shihao Yuan et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Physical

Aligned and Graded Type-II Ruddlesden-Popper Perovskite Films for Efficient Solar Cells

Jian Qing et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Fused-Ring Electron Acceptor ITIC-Th: A Novel Stabilizer for Halide Perovskite Precursor Solution

Minchao Qin et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Highly Efficient Amorphous Zn2SnO4 Electron-Selective Layers Yielding over 20% Efficiency in FAMAPbI3-Based Planar Solar Cells

Kyungeun Jung et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Efficient composition tuning via cation exchange and improved reproducibility of photovoltaic performance in FA(x)MA(1-x)PbI(3) planar heterojunction solar cells fabricated by a two-step dynamic spin-coating process

Kyungeun Jung et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Multichloro-Substitution Strategy: Facing Low Photon Energy Loss in Nonfullerene Solar Cells

Pengjie Chao et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

The intrinsic properties of FA(1-x)MAxPbI3 perovskite single crystals

Yuan Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Optimization of Stable Quasi-Cubic FAxMA1-xPbI3 Perovskite Structure for Solar Cells with Efficiency beyond 20%

Yi Zhang et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Unveiling the Influence of pH on the Crystallization of Hybrid Perovskites, Delivering Low Voltage Loss Photovoltaics

Nakita K. Noel et al.

JOULE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

High Performance of Perovskite Solar Cells via Catalytic Treatment in Two-Step Process: The Case of Solvent Engineering

Wenzhe Li et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ion-Exchange-Induced 2D-3D Conversion of HMA1-xFAxPbI3Cl Perovskite into a High-Quality MA1-xFAxPbI3 Perovskite

Ge Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Low-temperature solution-processed Li-doped SnO2 as an effective electron transporting layer for high-performance flexible and wearable perovskite solar cells

Minwoo Park et al.

NANO ENERGY (2016)

Add to Collection

Article Optics

Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination

Yanjun Fang et al.

NATURE PHOTONICS (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Electron Transport and Recombination in Solid-State Dye Solar Cell with Spiro-OMeTAD as Hole Conductor

Francisco Fabregat-Santiago et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.