☆ 4.8 Article

Low-cost synthesis of small molecule acceptors makes polymer solar cells commercially viable

NATURE COMMUNICATIONS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Kaien Chong et al.

Summary: This work demonstrates highly efficient polymer solar cells by improving charge extraction and suppressing charge recombination through side-chain engineering, adopting ternary blends, and introducing volatilizable solid additives. The optimized molecular structure and blend morphology lead to improved fill factor and power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Dilution effect for highly efficient multiple-component organic solar cells

Lijian Zuo et al.

Summary: Research shows that the "dilution effect" mechanism in multi-component organic solar cells can enhance luminescence quantum efficiency and open-circuit voltage, achieving high energy conversion efficiency.

NATURE NANOTECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Design of Nonfused Nonfullerene Acceptors Based on Pyrido- or Benzothiadiazole Cores for Organic Solar Cells

Md Waseem Hussain et al.

Summary: The synthesis of two nonfused nonfullerene acceptors (NFAs) with altered central acceptor core resulted in high photovoltaic performance. The A-D-A'-D-A type NFAs demonstrated broadband absorption characteristics and have the potential to significantly advance organic solar cells.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6:Y6-1O as acceptor

Xiaoling Ma et al.

Summary: A series of ternary organic photovoltaics have been successfully fabricated by incorporating Y6-1O, which leads to an increase in open-circuit voltage and power conversion efficiency of the devices. By finely adjusting the content of Y6-1O, the optimal device with 30% Y6-1O achieves a conversion efficiency of 17.91%, with significantly improved short-circuit current density and fill factor.

NATIONAL SCIENCE REVIEW (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Palladium-Tetrakis(Triphenylphosphine) Catalyst Traces on Charge Recombination and Extraction in Non-Fullerene-based Organic Solar Cells

Nora Schopp et al.

Summary: The impact of the cross-coupling catalyst Pd(PPh3)(4) on the performance of a model organic bulk-heterojunction solar cell was investigated, showing a significant effect on free charge carrier generation while limited impact on non-geminate recombination processes. The studied system exhibited substantial robustness towards the addition of small amounts of Pd(PPh3)(4).

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%

Lingling Zhan et al.

Summary: This study proposes and demonstrates a method to optimize the morphology of the active layer in organic photovoltaic devices by combining the layer-by-layer (LbL) procedure and the ternary strategy. By adding an asymmetric electron acceptor to the binary donor:acceptor host, a vertical phase distribution is formed, leading to improved efficiency in OPV devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

The role of charge recombination to triplet excitons in organic solar cells

Alexander J. Gillett et al.

Summary: The majority of charge recombination in organic solar cells that use NFAs occurs through non-emissive NFA triplet excitons under open-circuit conditions, reducing the open-circuit voltage. Engineering substantial hybridization between NFA triplet excitons and spin-triplet charge-transfer excitons can suppress this non-radiative recombination pathway, potentially leading to organic solar cells with power conversion efficiencies of 20% or more.

NATURE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Bridged 1,2-Bis(2-thienyl)ethylene: An Extremely Electron Rich Dithiophene Building Block Enabling Electron Acceptors with Absorption above 1000 nm for Highly Sensitive NIR Photodetectors

Yongjie Chen et al.

Summary: This study presents a new dithiophene building block, PDT, and two new NIR electron acceptors, PDTIC-4F and PDTTIC-4F, with optical absorptions up to 1030 nm. These materials show promising potential for organic photovoltaics and organic photodetectors in the near-infrared region.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Alkyl-Chain Branching of Non-Fullerene Acceptors Flanking Conjugated Side Groups toward Highly Efficient Organic Solar Cells

Jianquan Zhang et al.

Summary: Side-chain modifications of NFAs play a crucial role in enhancing the performance of OSCs. By introducing bulkier alkyl chains branched at specific positions, it is possible to alter molecular packing, improve open-circuit voltage, and achieve better device performance. The side-chain branching design of NFAs shows great potential in optimizing molecular properties and promoting photovoltaic performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents

Haiyang Chen et al.

Summary: The research team successfully achieved power conversion efficiencies of over 17% in organic solar cells processed from green solvent paraxylene (PX) using a guest-assisted assembly strategy. This approach improved device operational stability and enabled uniform deposition on large-area modules with high efficiency, paving the way for industrial development of organic solar cells.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nonradiative Triplet Loss Suppressed in Organic Photovoltaic Blends with Fluoridated Nonfullerene Acceptors

Rui Wang et al.

Summary: The research shows that using fluorinated nonfullerene acceptors in organic photovoltaic blends can suppress the bimolecular recombination of spin-uncorrelated electrons and holes, prolonging the lifetime of charge carriers. This fluorination effect can be explained by modifying the energy alignment between the charge-transfer and locally excited triplet excited states.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Systematic Merging of Nonfullerene Acceptor π-Extension and Tetrafluorination Strategies Affords Polymer Solar Cells with >16% Efficiency

Guoping Li et al.

Summary: The study found that combining the π-extension and halogenation strategies of end-capping groups (EG) in organic solar cells significantly impacts optical absorption, leading to an increase in power conversion efficiency (PCE).

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Jianqiu Wang et al.

Summary: This study fabricated highly efficient double-junction tandem OPV cells by optimizing the photoactive layers and developing an effective method to tune optical field distribution. By fine-tuning the top photoactive layer, a PCE of 19.64% was achieved, the highest in the OPV field and certified as 19.50% by the National Institute of Metrology.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

1,1-Dicyanomethylene-3-Indanone End-Cap Engineering for Fused-Ring Electron Acceptor-Based High-Performance Organic Photovoltaics

Jiaming Huang et al.

Summary: The development of organic photovoltaics (OPVs) has accelerated with the advent of fused-ring electron acceptors (FREAs), particularly with the use of 1,1-dicyanomethylene-3-indanone (IC) and its derivatives as critical components for performance enhancement. Over 50 IC derivatives have been reported for constructing high-performance FREA-based OPVs, with potential future directions in stability, isomerism, and EG redistribution to address challenges faced by IC end groups.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fine-tuning of side-chain orientations on nonfullerene acceptors enables organic solar cells with 17.7% efficiency

Gaoda Chai et al.

Summary: Side-chain engineering plays a crucial role in optimizing Y-series nonfullerene acceptors (NFAs) for organic solar cells (OSCs). By investigating the orientation of side chains, it was found that the meta-positioned hexylphenyl group (m-BTP-PhC6) showed the most beneficial effects on optical absorption, intermolecular packing, and phase separation of NFAs, resulting in a device efficiency of 17.7% when paired with a donor polymer PTQ10. This study demonstrates that regulating side-chain orientations of Y-series NFAs is a promising strategy for achieving favorable morphology, high charge mobility, and improved solar cell performances.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Non-fullerene Acceptor with Enhanced Intermolecular π-Core Interaction for High-Performance Organic Solar Cells

Francis Lin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precisely Controlling the Position of Bromine on the End Group Enables Well-Regular Polymer Acceptors for All-Polymer Solar Cells with Efficiencies over 15%

Zhenghui Luo et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Acceptor-donor-acceptor type molecules for high performance organic photovoltaics - chemistry and mechanism

Xiangjian Wan et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Trifluoromethylation Enables a 3D Interpenetrated Low-Band-Gap Acceptor for Efficient Organic Solar Cells

Hanjian Lai et al.

JOULE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells

Andrew Wadsworth et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Multidisciplinary Sciences

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors

Xiaojun Li et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Jun Yuan et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Bromination of the Small-Molecule Acceptor with Fixed Position for High-Performance Solar Cells

Jianfei Qu et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push-Pull Effect of the Nonfullerene Acceptor

Wanning Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fine-Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54%

Zhenghui Luo et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Analyzing the efficiency, stability and cost potential for fullerene-free organic photovoltaics in one figure of merit

Ning Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Design rules for minimizing voltage losses in high-efficiency organic solar cells

Deping Qian et al.

NATURE MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Add to Collection

Review Optics

Next-generation organic photovoltaics based on non-fullerene acceptors

Pei Cheng et al.

NATURE PHOTONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

A low cost and high performance polymer donor material for polymer solar cells

Chenkai Sun et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells

Shuixing Dai et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra-Narrow Band Gap

Huifeng Yao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Organic

Indium(III)-Catalyzed Knoevenagel Condensation of Aldehydes and Activated Methylenes Using Acetic Anhydride as a Promoter

Yohei Ogiwara et al.

JOURNAL OF ORGANIC CHEMISTRY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Detection and role of trace impurities in high-performance organic solar cells

Maxim P. Nikiforov et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Solution-Processed Bulk Heterojunction Solar Cells by Antiparallel Supramolecular Arrangement of Dipolar Donor-Acceptor Dyes

Hannah Buerckstuemmer et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Add to Collection

Review Chemistry, Organic

GaCl3 in organic synthesis

R Amemiya et al.

EUROPEAN JOURNAL OF ORGANIC CHEMISTRY (2005)

Add to Collection

Article Chemistry, Organic

Lithium trifluoromethanesulfonate (LiOTf) as a recyclable catalyst for highly efficient acetylation of alcohols and diacetylation of aldehydes under mild and neutral reaction conditions

B Karimi et al.

JOURNAL OF ORGANIC CHEMISTRY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.