☆ 4.5 Article

Early wheel flat detection: an automatic data-driven wavelet-based approach for railways

VEHICLE SYSTEM DYNAMICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Stochastic analysis of railway embankment with uncertain soil parameters using polynomial chaos expansion

Mohammadreza Mohammadi et al.

Summary: This paper focuses on the stochastic response of railway embankments, considering the uncertainties in soil cohesion and friction angle. A non-sampling stochastic method, involving generalised polynomial chaos (gPC) expansion, is used for dynamic numerical simulation. The uncertain parameters, soil cohesion and friction angle, are defined using truncated gPC expansions. The accuracy and time efficiency of the proposed non-sampling method in quantifying uncertainty are demonstrated through comparisons with classical Monte Carlo simulations.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2023)

Add to Collection

Article Engineering, Mechanical

Online unsupervised detection of structural changes using train-induced dynamic responses

Andreia Meixedo et al.

Summary: This paper proposes a continuous online procedure for damage detection based on train-induced dynamic bridge responses, utilizing a methodology that enhances sensitivity to small-scale structural changes while mitigating false positive detections caused by environmental influences. The research combines ARX models, PCA, and clustering algorithms to sequentially process monitoring data and achieve improved damage detection performance over time. The strategy proves to be robust in detecting a comprehensive set of damage scenarios with minimal false detection incidence and sensitivity to smaller damage levels, demonstrating the effectiveness of the proposed procedure.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Chemistry, Analytical

Development and Validation of a Weigh-in-Motion Methodology for Railway Tracks

Bruno Pintao et al.

Summary: Weigh-in-motion systems play a crucial role in railways by estimating the static and dynamic weight of trains, providing protection and guidance for train operations. This study proposes a new WIM algorithm for ballasted tracks and validates its potential for real-world application.

SENSORS (2022)

Add to Collection

Article Engineering, Civil

An approach for wheel flat detection of railway train wheels using envelope spectrum analysis

Araliya Mosleh et al.

Summary: The research presents an approach using envelope spectrum analysis to detect wheel flats in high axle load train wheelsets. The sensitivity of the method to track unevenness, random wheel flat impact occurrence, and flat severity is discussed and tested, as well as its ability to accurately detect wheel flats under different noise intensities. The results show that envelope spectrum analysis is a cost-effective method capable of detecting wheel flats and flat impact frequency for different train speeds in real-world conditions.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Load-carrying capacity evaluation of girder bridge using moving vehicle

Zhen Sun et al.

Summary: Efficient and reliable load-carrying capacity evaluation of deficient bridges is crucial for maintenance and management. A new method based on displacement under moving vehicles was proposed and verified through numerical simulations and full-scale implementation, showing that it is more effective and economical than conventional methods.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Statistical methodologies for removing the operational effects from the dynamic responses of a high-rise telecommunications tower

Diogo Ribeiro et al.

Summary: This paper discusses statistical methodologies for removing operational effects from the dynamic responses of a telecommunications tower. By analyzing the results of continuous monitoring, critical and sporadic events were identified. Two distinct methodologies based on PCA and CF with AR models were proposed to eliminate operational effects, with the latter showing computational efficiency and fewer false-positive occurrences in identifying critical events. The developed methodologies have the potential to be integrated into Structural Health Monitoring systems for assessing the safety and serviceability of telecommunications towers.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Add to Collection

Article Engineering, Civil

Progressive numerical model validation of a bowstring-arch railway bridge based on a structural health monitoring system

Andreia Meixedo et al.

Summary: This paper presents a progressive numerical validation of a bowstring-arch railway bridge based on experimental data analysis. It discusses an integrated approach using SHM measurements to understand the structural behavior of the bridge, achieving good agreement between experimental and numerical data through different phases of analysis.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Railway Vehicle Wheel Flat Detection with Multiple Records Using Spectral Kurtosis Analysis

Araliya Mosleh et al.

Summary: This study focuses on identifying the type and optimal position of sensors for wayside monitoring system to detect wheel flats, using 3D numerical simulation to identify flats and analyze the influence of sensor type and location on the accuracy of the detection system.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Civil

Bridge Weigh-in-Motion system for the identification of train loads using fiber-optic technology

Ricardo Pimentel et al.

Summary: This paper presents a cost-effective Bridge Weigh-in-Motion (B-WIM) system using fiber-optic technology to identify train loads, with the capability of estimating the train's speed, geometry, and static axle loads. The system relies on an algorithm proposed by Moses that involves an inverse identification problem resolution. The numerical validation example on a simply supported bridge demonstrated the functionality and accuracy of the implemented B-WIM system, with maximum estimated errors of 10 cm for wheelbase and 2.5% for axle loads at speeds up to 120 km/h.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Damage detection in railway bridges using traffic-induced dynamic responses

Andreia Meixedo et al.

Summary: This paper proposes an automatic data-driven method for detecting damage in railway bridges based on traffic-induced dynamic responses, which extracts damage-sensitive features and utilizes the magnitude of loading to enhance sensitivity to small structural changes. Experimental validation shows that the method is highly sensitive to early damage detection and robust to false detections.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

A new strategy to estimate static loads for the dynamic weighing in motion of railway vehicles

Araliya Mosleh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2020)

Add to Collection

Article Engineering, Mechanical

Damage detection under environmental and operational effects using cointegration analysis - Application to experimental data from a cable-stayed bridge

Emanuel Sousa Tome et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Civil

Reconstruction of an informative railway wheel defect signal from wheel-rail contact signals measured by multiple wayside sensors

Alireza Alemi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Railway Point Machine Prognostics Based on Feature Fusion and Health State Assessment

Vepa Atamuradov et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Add to Collection

Article Engineering, Mechanical

Wear damage of out-of-round wheels in rail wagons under braking

Qingqun Lan et al.

ENGINEERING FAILURE ANALYSIS (2019)

Add to Collection

Article Acoustics

Outlier ensembles: A robust method for damage detection and unsupervised feature extraction from high-dimensional data

L. A. Bull et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Article Transportation Science & Technology

An effective spatial-temporal attention based neural network for traffic flow prediction

Loan N. N. Do et al.

TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES (2019)

Add to Collection

Article Engineering, Civil

Wheel Defect Detection With Machine Learning

Gabriel Krummenacher et al.

IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2018)

Add to Collection

Review Engineering, Civil

Condition monitoring approaches for the detection of railway wheel defects

Alireza Alemi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2017)

Add to Collection

Article Engineering, Civil

Deep Multitask Learning for Railway Track Inspection

Xavier Gibert et al.

IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2017)

Add to Collection

Article Engineering, Mechanical

Fault detection method for railway wheel flat using an adaptive multiscale morphological filter

Yifan Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Review Engineering, Mechanical

An overview: modern techniques for railway vehicle on-board health monitoring systems

Chunsheng Li et al.

VEHICLE SYSTEM DYNAMICS (2017)

Add to Collection

Article Engineering, Civil

The influence of train properties on railway ground vibrations

Aires Colaco et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Wayside detection of faults in railway axle bearings using time spectral kurtosis analysis on high-frequency acoustic emission signals

Arash Amini et al.

ADVANCES IN MECHANICAL ENGINEERING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Wheel-rail contact formulation for analyzing the lateral train-structure dynamic interaction

P. A. Montenegro et al.

COMPUTERS & STRUCTURES (2015)

Add to Collection

Article Engineering, Civil

Automatic Detection of Squats in Railway Infrastructure

Maria Molodova et al.

IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2014)

Add to Collection

Article Engineering, Multidisciplinary

Machine learning algorithms for damage detection under operational and environmental variability

Eloi Figueiredo et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2011)

Add to Collection

Article Transportation Science & Technology

Railway wheel-flat detection and measurement by ultrasound

J. Brizuela et al.

TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES (2011)

Add to Collection

Article Mechanics

The inverse identification problem and its technical application

Tadeusz Uhl

ARCHIVE OF APPLIED MECHANICS (2007)

Add to Collection

Article Engineering, Mechanical

Wheel-flat diagnostic tool via wavelet transform

Vittorio Belotti et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2006)

Add to Collection

Article Engineering, Mechanical

Out-of-round railway wheels - a study of wheel polygonalization through simulation of three-dimensional wheel-rail interaction and wear

A Johansson et al.

VEHICLE SYSTEM DYNAMICS (2005)

Add to Collection

Article Engineering, Mechanical

Structural damage diagnosis under varying environmental conditions - Part I: A linear analysis

AM Yan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2005)

Add to Collection

Review Engineering, Civil

A review of the effects of out-of-round wheels on track and vehicle components

DW Barke et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2005)

Add to Collection

Article Acoustics

A hybrid model fop, the noise generation due to railway wheel flats

TX Wu et al.

JOURNAL OF SOUND AND VIBRATION (2002)

Add to Collection

Article Engineering, Civil

Dynamic effects of vehicles on tracks in the case of raising train speeds

WM Zhai et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.