Related references
Note: Only part of the references are listed.Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti-6Al-4V titanium alloy: Cryogenic versus wet machining
Chetan Agrawal et al.
TRIBOLOGY INTERNATIONAL (2021)
An Experimental and Finite Element Approach for a Better Understanding of Ti-6Al-4V Behavior When Machining under Cryogenic Environment
Roland Bejjani et al.
MATERIALS (2021)
Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique
Navneet Khanna et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of cryogenic assistance on hole shrinkage during Ti6Al4V drilling
Johan Merzouki et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques
Prassan Shah et al.
TRIBOLOGY INTERNATIONAL (2020)
Machinability of inconel 718 during turning: Cutting force model considering tool wear, influence on surface integrity
Bastien Toubhans et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Hybrid experimental/modelling methodology for identifying the convective heat transfer coefficient in cryogenic assisted machining
P. Lequien et al.
APPLIED THERMAL ENGINEERING (2018)
Influence of oxygen on the tool wear in machining
Volodymyr Bushlya et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
High-pressure water-jet-assisted machining of Ti555-3 titanium alloy: investigation of tool wear mechanisms
Y. Ayed et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools
Xiaoliang Liang et al.
TRIBOLOGY INTERNATIONAL (2018)
The effect of titanium alloy chemistry on machining induced tool crater wear characteristics
Oliver Hatt et al.
WEAR (2018)
Analytical modeling of the thermal aspects of metalworking fluids in the milling process
Sharaf Al Sofyani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Impact of supply conditions of liquid nitrogen on tool wear and surface integrity when machining the Ti-6Al-4V titanium alloy
Y. Ayed et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V
Xiaoliang Liang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys
C. Ramirez et al.
WEAR (2017)
On the mechanism of tool crater wear during titanium alloy machining
Oliver Hatt et al.
WEAR (2017)
A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy
Farbod Akhavan Niaki et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Cryogenic manufacturing processes
I. S. Jawahir et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Effect of the local friction and contact nature on the Built-Up Edge formation process in machining ductile metals
S. Atlati et al.
TRIBOLOGY INTERNATIONAL (2015)
Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy
A. Bordin et al.
WEAR (2015)
Optimization of a drilling sequence under MQL to minimize the thermal distortion of a complex aluminum part
Pierre Faverjon et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2015)
The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
G. Rotella et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting
J. Rech et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
Y. Kaynak et al.
WEAR (2013)
Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V
M. J. Bermingham et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting
M. J. Bermingham et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Machinability of titanium alloys (Ti6Al4V and Ti555.3)
P. -J. Arrazola et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A review of cryogenic cooling in machining processes
Yakup Yildiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Diffusion wear in dry cutting of Ti-6Al-4V with WC/Co carbide tools
Deng Jianxin et al.
WEAR (2008)
Tool wear in cryogenic turning of Ti-6Al-4V alloy
K. A. Venugopal et al.
CRYOGENICS (2007)
Predictive analvtical and thermal modeling of orthogonal cutting process -: Part II:: Effect of tool flank wear on tool forces, stresses, and temperature distributions
Yigit Karpat et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2006)
A review on high-speed machining of titanium alloys
M Rahman et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2006)
The effect of tool flank wear on the orthogonal cutting process and its practical implications
J Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V
SY Hong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
SY Hong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)