☆ 4.7 Article

Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors

TRIBOLOGY INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Abrasive wear performance and wear map of ZrB2-MoSi2-SiCw composites

Tanay Rudra Paul et al.

Summary: The addition of SiCw decreases the coefficient of friction, specific wear rate, and surface roughness of ZrB2-MoSi2 composites, while enhancing wear resistance. The tribological performance of the composites is influenced by experimental conditions, with the damage tolerance limits varying for different applied loads. Wear mechanisms shift from delamination, cracking, and grain pull out at medium loads to grain boundary fracture at higher loads.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Insight of high-entropy alloy particles-reinforced 2219 Al matrix composites via the ultrasonic casting technology

Yun Zhang et al.

Summary: The introduction of high-entropy AlCoCrFeNi alloy particles into 2219 Al alloys via ultrasonic casting technology significantly reduced the average grain size of the aluminum matrix composites and improved their mechanical properties. An optimal addition of approximately 1.5 wt% of HEAps demonstrated the highest tensile strength and maximum micro-hardness, with various strengthening mechanisms contributing to the enhancement in yield strength.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Engineering, Mechanical

Tribological performance and wear mechanisms of a high-temperature wear-resistant Al-Si/SiAlON composite

Hui Tan et al.

Summary: The SiAlON particle reinforced Al-20Si5Fe-2Ni alloy matrix composite exhibits outstanding wear resistance and high-temperature properties, primarily attributed to the addition of SiAlON ceramic leading to improved high-temperature hardness and the formation of a tribolayer on the worn surface.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Size Control of In Situ Synthesized TiB2 Particles in Molten Aluminum

Jie Yuan et al.

Summary: The study successfully synthesized TiB2 nanoparticles with a narrow size distribution in molten aluminum at high temperatures by controlling the reaction temperature, and also developed an interface diffusion-controlled model to reveal the size control mechanism. Temperature plays a crucial role in regulating the average size of synthesized nanoparticles, while the dilution of reactant salt is essential for maintaining a steady reaction environment.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Synthesis of nano- to micrometer-sized B4C particle-reinforced aluminum matrix composites via powder metallurgy and subsequent heat treatment

Liu Rui-feng et al.

Summary: B4C/6061Al composites reinforced with nano- to micrometer-sized B4C particles were fabricated via powder metallurgy route consisting of spark plasma sintering (SPS) and hot extrusion and rolling (HER), followed by T6 treatment. The microstructural evolution showed changes in the status of B4C particles, with significant improvements in the mechanical properties. Despite grain coarsening after T6 treatment, the composites still exhibited enhanced hardness and tensile strength.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of hot extrusion on microstructure and tribological behavior of Al2O3p reinforced 7075 aluminum-matrix composites

Lei Yu-shun et al.

Summary: The optimal addition of 2 wt% Al2O3p and hot extrusion treatment lead to significant changes in the microstructure, hardness, and wear rate of 7075 composites. The reinforced wear resistance is attributed to the protective effect of the Al2O3p reinforced transition layer, which becomes stable after hot extrusion.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Add to Collection

Article Engineering, Manufacturing

Influence of hot rolling on friction and wear behaviour of Al6061-ZrB2 in-situ metal matrix composites

R. Vasanth Kumar et al.

Summary: The Al6061 ZrB2 metal matrix composites prepared by stir-casting with in-situ reaction showed improved wear resistance and reduced friction coefficient after hot-rolling. The effects of different rolling directions on the friction and wear behavior of the composites were evaluated, with samples tested in the RD and 45D orientations showing the lowest coefficients of friction and wear rates.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Materials Science, Composites

Developments in the aluminum metal matrix composites reinforced by micro/nano particles - A review

Neeraj K. Bhoi et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics

Yaghoub Pazhouhanfar et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure degradation of austenitic stainless steels after 45 years of operation as VVER-440 reactor internals

E. A. Kuleshova et al.

JOURNAL OF NUCLEAR MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Guanyu Deng et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, Mechanical Properties, and Sliding Wear Behavior of Oxide-Dispersion-Strengthened FeMnNi Alloy Fabricated by Spark Plasma Sintering

Lu Yang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

AlCoCrFeNi high-entropy alloy particle reinforced 5083Al matrix composites with fine grain structure fabricated by submerged friction stir processing

Xiao Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum

Qinglin Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Tuning the microstructure morphology and genetic mechanical properties of 2219 Al alloy with ultrasonic treatment

Yun Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Engineering, Manufacturing

Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties

Priyaranjan Samal et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview

Nosa Idusuyi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Materials Science, Composites

Influence of TiC on dry sliding wear and mechanical properties of in situ synthesized AA5052 metal matrix composites

Priyaranjan Samal et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of AlN-based ceramic composites for use as millimeter-wave susceptor materials at high temperature: Dielectric properties of AlN:Mo with 0.25 vol% to 4.0 vol% Mo from 25 to 550 °C

Brad W. Hoff et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Microstructural evolution and mechanical properties of the AA2219/TiC nanocomposite manufactured by ultrasonic solidification

Yilong Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Ceramics

Influence of ZrB2 hard ceramic reinforcement on mechanical and wear properties of aluminum

S. Sivakumar et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Engineering, Chemical

Study on three-body abrasive wear behavior of functionally graded Al/TiB2 composite using response surface methodology

N. Radhika et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique

Y. X. Ye et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Ceramics

Effect of particle size on dry sliding wear behaviour of sillimanite reinforced aluminium matrix composites

Sandeep Sharma et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution

Hong Luo et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Engineering, Multidisciplinary

High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite

Santanu Sardar et al.

MEASUREMENT (2018)

Add to Collection

Article Chemistry, Physical

Effect of oxidation of SiC particles on mechanical properties and wear behavior of SiCp/Al6061 composites

Pham Van Trinh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Dry Sliding wear of AA2219/Gr Metal matrix composites

A. Saravanakumar et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A Study of Tribological Behaviour of Aluminum-7075/SiC Metal Matrix Composite

S. Madhavarao et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Atomic-scale mechanism of the θ→θ′ phase transformation in Al-Cu alloys

Zhenju Shen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Ceramics

Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting

J. Allwyn Kingsly Gladston et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures

F. Otto et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of reinforcement on wear resistance of aluminum matrix composites

A. Pramanik

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy

C. Antony Vasantha Kumar et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

Add to Collection

Article Engineering, Mechanical

The tribological behavior evolution of TiB2/Al composites from running-in stage to steady stage

Haitao Chi et al.

WEAR (2016)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Aluminum Matrix Composites for Industrial Use: Advances and Trends

S. T. Mavhungu et al.

INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017) (2016)

Add to Collection

Article Engineering, Mechanical

Manufacturing and tribological properties of copper matrix/carbon nanotubes composites

C. B. Lin et al.

WEAR (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Sliding wear of nanocrystalline Ni-W: Structural evolution and the apparent breakdown of Archard scaling

Timothy J. Rupert et al.

ACTA MATERIALIA (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating

Kantesh Balani et al.

ACTA MATERIALIA (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.