4.4 Article

Three-Dimensional Culture for In Vitro Folliculogenesis in the Aspect of Methods and Materials

Related references

Note: Only part of the references are listed.
Article Biology

Post-thawing and culture comparison of three routine slow freezing methods for human ovarian tissue cryopreservation: Histological, molecular, and hormonal aspects

Fateme Hajati et al.

Summary: By comparing three pre-established routine slow freezing methods, one (SF3) was found to be more promising in maintaining the function of follicles during culture and reducing cell damage. The study highlighted the importance of cryoprotectant type and thawing speed in preserving follicular quality.

CRYOBIOLOGY (2022)

Article Engineering, Biomedical

Ovarian extracellular matrix-based hydrogel for human ovarian follicle survival in vivo: A pilot work

Maria-Costanza Chiti et al.

Summary: The study developed an oECM hydrogel derived from decellularized bovine ovaries, capable of supporting human ovarian follicle survival and growth in vitro when combined with alginate. Increasing alginate content in the hydrogel improved follicle recovery rates, but did not significantly impact follicle viability or growth.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2022)

Article Reproductive Biology

Transcriptional downregulation of ABC transporters is related to follicular degeneration after vitrification and in vitro culture of ovine ovarian tissue

A. D. Sales et al.

Summary: This study aimed to investigate the relative abundances of ABC transporters mRNA transcripts in ovine ovarian tissue after vitrification and in vitro culture. The results showed a negative correlation between degenerated follicles and mRNA transcript abundances of ABCB1 and ABCG2, with a significant decrease in the percentage of growing follicles after in vitro culture. Further studies are needed to explore the functions of ABC transporters in ovine folliculogenesis after in vitro culture.

THERIOGENOLOGY (2022)

Article Obstetrics & Gynecology

Three-dimensional bioprinting of artificial ovaries by an extrusion-based method using gelatin-methacryloyl bioink

T. Wu et al.

Summary: The study demonstrated that GelMA is suitable for 3D printing fabrication, with scaffolds showing good hygroscopicity, degradation kinetics, and shape fidelity. While primary ovarian somatic cells had lower viability compared to commercial cell lines, the GelMA-based 3D printing system provided a conducive microenvironment for follicular growth and maturation, resulting in successful ovulation and the observation of Metaphase II oocytes. The GelMA-based 3D printing culture system presents as a promising alternative for follicular development and holds potential for clinical applications in treating female endocrine and reproductive conditions.

CLIMACTERIC (2022)

Article Agriculture, Dairy & Animal Science

Molecular characteristics of oocytes and somatic cells of follicles at different sizes that influence in vitro oocyte maturation and embryo production

F. T. G. Bezerra et al.

Summary: In vitro research has made significant advances in predicting antral follicle growth and oocyte maturation, with a focus on the roles of cumulus and mural granulosa cells. Differences in gene expression in small and large follicles impact the success of in vitro blastocyst development, while molecular mechanisms related to COC metabolism and antioxidant defense are highlighted as crucial for oocyte competence. New insights and perspectives on the molecular and cellular regulation of in vitro oocyte maturation are emphasized.

DOMESTIC ANIMAL ENDOCRINOLOGY (2021)

Article Biotechnology & Applied Microbiology

Comparing various protocols of human and bovine ovarian tissue decellularization to prepare extracellular matrix-alginate scaffold for better follicle development in vitro

Hossein Nikniaz et al.

Summary: This study compared different protocols for decellularizing the ovarian scaffold and evaluated follicle survival in an extracellular matrix-alginate scaffold. Results showed successful decellularization in all experimental groups, with the SDS-Triton-Ammonium group showing the lowest residual DNA content and highest cytobiocompatibility for follicles. The decellularized scaffold made from ovarian tissues decellularized using SDS-Triton-Ammonium and sodium alginate is suggested as a potential 3D substrate for in vitro culture of follicles for fertility preservation.

BMC BIOTECHNOLOGY (2021)

Article Engineering, Biomedical

Generation of offspring-producing 3D ovarian organoids derived from female germline stem cells and their application in toxicological detection

Xiaoyong Li et al.

Summary: In this study, ovarian organoids derived from female germline stem cells were shown to be capable of producing normal offspring and detecting drug toxicity, demonstrating their potential as a valuable model system for reproductive medicine and toxicological detection.

BIOMATERIALS (2021)

Article Medicine, Research & Experimental

Comparison of IVF and IVM outcomes in the same patient treated with a modified IVM protocol along with an oocytes-maturing system containing melatonin: A pilot study

Xinyuan Li et al.

Summary: This study compared the developmental competence and clinical outcomes of IVF and IVM oocytes, showing no significant differences in clinical pregnancy, implantation, or live birth rates between the two groups. However, IVF oocytes had a higher cleavage rate. Mitochondrial function indicators also differed between IVF and IVM oocytes, with increased reactive oxygen species and Ca2+ levels in IVM oocytes.

LIFE SCIENCES (2021)

Article Oncology

Use of Simvastatin, Fibrin Clots, and Their Combination to Improve Human Ovarian Tissue Grafting for Fertility Restoration After Anti-Cancer Therapy

Roei Magen et al.

Summary: The study aimed to investigate whether treatment with simvastatin or embedding human ovarian tissue within fibrin clots can improve human ovarian tissue grafting. The results showed that there was a significantly higher number of follicles in the ungrafted control group A compared to the untreated tissue group B. Additionally, simvastatin-treated hosts in group C had the highest levels of follicle atresia.

FRONTIERS IN ONCOLOGY (2021)

Article Immunology

The identification of endometrial immune cell densities and clustering analysis in the mid-luteal phase as predictor for pregnancy outcomes after IVF-ET treatment

Yiwei Zhao et al.

Summary: Changes in endometrial immune cell density may be associated with reproductive failure. This study aimed to investigate the prognostic value of endometrial immune cell measurement on pregnancy outcome after in vitro fertilization. Results showed that higher uNK cell density and clustering level between uNK cells and macrophages were associated with failure to conceive. Combined analysis of uNK measurement and uNK-to-macrophage clustering improved the predictive value for successful implantation after IVF-ET.

JOURNAL OF REPRODUCTIVE IMMUNOLOGY (2021)

Article Engineering, Biomedical

A biomimetic model of 3D fluid extracellular macromolecular crowding microenvironment fine-tunes ovarian cancer cells dissemination phenotype

Rumeyza Bascetin et al.

Summary: The study revealed that ovarian cancer cells exhibit different biological behaviors in high concentrations of macromolecular polymer solutions, affecting cell adhesion and migration; different fluid compositions can impact extracellular matrix deposition and related intracellular processes, thereby influencing cell dissemination phenotypes.

BIOMATERIALS (2021)

Article Obstetrics & Gynecology

The effect of agar substrate on growth and development of cryopreserved-thawed human ovarian cortical follicles in organ culture

Zeinab Ghezelayagh et al.

Summary: The study compared agar as a cultivation substrate with matrigel-coated insert for in-situ human follicle culture. Results showed that agar and matrigel-coated inserts both supported follicular growth and survival, with agar culture group showing higher percentage of growing follicles, lower apoptotic index, and significantly higher expression of proliferative marker Ki67.

EUROPEAN JOURNAL OF OBSTETRICS & GYNECOLOGY AND REPRODUCTIVE BIOLOGY (2021)

Article Obstetrics & Gynecology

Matrix-free 3D culture supports human follicular development from the unilaminar to the antral stage in vitro yielding morphologically normal metaphase II oocytes

Fuhua Xu et al.

Summary: Stage-specific AMH modulation in group culture promotes coordinated growth and function of human follicles, leading to mature oocytes. This method has been previously successful in nonhuman primates.

HUMAN REPRODUCTION (2021)

Article Reproductive Biology

In vitro production of haploid germ cells from murine spermatogonial stem cells using a two-dimensional cell culture system

Fahar Ibtisham et al.

Summary: In vitro cultivation of prepubertal mouse spermatogonial stem cells in a two-dimensional system can lead to the generation of colonies capable of differentiating into haploid germ cells. The addition of retinol can increase the proportion of haploid germ cells in the culture.

THERIOGENOLOGY (2021)

Article Reproductive Biology

Rutin promotes activation and reduces apoptosis of primordial follicles by regulating Akt phosphorylation after in vitro culture of ovine ovarian tissue

T. L. B. G. Lins et al.

Summary: The study found that 1 μg/mL of rutin has a positive effect on the survival and development of primordial follicles in sheep ovarian tissue, by reducing apoptosis and promoting activation and growth. This effect is achieved through the modulation of the PI3K/Akt signaling pathway.

THERIOGENOLOGY (2021)

Article Reproductive Biology

In vitro exposure of sheep ovarian tissue to the xenoestrogens zearalenone and enterolactone: Effects on preantral follicles

I. P. Silva et al.

Summary: This study evaluated the effects of ZEN and ENL, alone or in combination, on the survival and morphology of in vitro cultured ovarian preantral follicles. The results showed that while ZEN impaired the morphology of follicles, ENL improved the cultured secondary follicles. However, the combination of ENL with ZEN impaired the quality of primary and secondary follicles.

THERIOGENOLOGY (2021)

Article Chemistry, Analytical

Creating an Artificial 3-Dimensional Ovarian Follicle Culture System Using a Microfluidic System

Mae W. Healy et al.

Summary: The study successfully constructed 3-dimensional ovarian follicles using a microfluidic system, mimicking the necessary environment for early oocyte development. Somatic cell viability tests and hormonal assessments confirmed the cells' viability and endocrine function. The novel system can be easily adapted for sterile, high throughput applications.

MICROMACHINES (2021)

Article Reproductive Biology

The challenge of ovarian tissue culture: 2D versus 3D culture

Ana Sofia Pais et al.

Summary: The study compared conventional (2D) culture with an alginate matrix three-dimensional (3D) model for ovarian tissue culture. The results showed that 3D culture did not have an advantage over 2D culture, as it was more time consuming, challenging to perform, and had worse reproducibility. The 3D culture did show lower cytotoxicity at 24h, but tissue injury was greater with higher interstitial edema and tissue necrosis compared to 2D culture after 72h.

JOURNAL OF OVARIAN RESEARCH (2021)

Review Engineering, Biomedical

Personalized models of heterogeneous 3D epithelial tumor microenvironments: Ovarian cancer as a model

Eric N. Horst et al.

Summary: Traditional cancer treatments are often non-specific, limiting efficacy, especially in heterogeneous patient populations. Personalized tumor-specific models offer potential breakthroughs in precision medicine, allowing for tailored therapies based on individual patient characteristics. By analyzing patient biopsies and generating precise 3D models, these personalized cancer models can have significant clinical applications and inform the development of new targeted therapies.

ACTA BIOMATERIALIA (2021)

Article Engineering, Biomedical

Sequestered cell-secreted extracellular matrix proteins improve murine folliculogenesis and oocyte maturation for fertility preservation

Claire E. Tomaszewski et al.

Summary: In this study, synthetic matrices functionalized with ECM-sequestering peptides improved follicle survival, growth, and maturation compared to inert controls. The peptides facilitated deposition and retention of cell-secreted ECM molecules, promoting healthy organoid development. The biomimetic material holds promise for tissue engineering applications by allowing encapsulated cells to rebuild their native microenvironments in vitro.

ACTA BIOMATERIALIA (2021)

Article Obstetrics & Gynecology

In vitro growth and maturation of primordial follicles and immature oocytes

Evelyn E. Telfer et al.

Summary: The cryopreservation of ovarian tissue is widely used to preserve fertility in high-risk females. Besides transplantation, in vitro maturation of oocytes from ovarian tissue can also be used to restore fertility safely in cases where transplantation is contraindicated.

FERTILITY AND STERILITY (2021)

Article Chemistry, Multidisciplinary

Evaluation of PEGylated fibrin as a three-dimensional biodegradable scaffold for ovarian tissue engineering

A. Dadashzadeh et al.

Summary: This study demonstrated that PEGylated fibrin hydrogels enhanced scaffold stability, supported cell viability and proliferation. PEG:Fib 5:1 T50 showed a significantly higher cell density dynamic and a lower expression of caspase-3. In contrast, PEG:Fib 10:1 T50 hydrogels had uniform cell distribution and a higher rate of Ki67-positive cells.

MATERIALS TODAY CHEMISTRY (2021)

Article Veterinary Sciences

In vitro long-term culture of isolated ovine preantral follicles: Influence of ethanol on steroid production, oocyte meiotic resumption, and metabolomic profile.

Renato F. Silva et al.

Summary: Ethanol treatment increased degeneration rates of follicles and oocytes, but led to higher estradiol secretion and meiotic resumption. It decreased mRNA levels of certain genes but increased others. The metabolomic profiles of follicles were similar between ethanol and rbFSH treatments, different from the Control treatment.

RESEARCH IN VETERINARY SCIENCE (2021)

Review Engineering, Biomedical

Designing Hydrogels for 3D Cell Culture Using Dynamic Covalent Crosslinking

Muhammad Rizwan et al.

Summary: Designing simple biomaterials to replicate tissue properties is challenging in tissue engineering. Current biomaterials mainly provide macroscopic tunability of scaffold mechanics and do not reflect the dynamic nature of the natural extracellular microenvironment. There are opportunities to investigate cells capable of locally remodeling matrices for more complex applications.

ADVANCED HEALTHCARE MATERIALS (2021)

Review Engineering, Biomedical

A review on biomaterials for ovarian tissue engineering

Arezoo Dadashzadeh et al.

Summary: Developing artificial ovaries through tissue engineering presents a potential solution for female cancer patients facing infertility issues due to treatment. Advances in technologies such as 3D printing and ovary-on-a-chip offer promising approaches for replicating normal ovarian tissue structure and function.

ACTA BIOMATERIALIA (2021)

Article Biotechnology & Applied Microbiology

Roles of N-linked and O-linked glycosylation sites in the activity of equine chorionic gonadotropin in cells expressing rat luteinizing hormone/chorionic gonadotropin receptor and follicle-stimulating hormone receptor

So-Yun Lee et al.

Summary: The study found that glycosylation sites in eCG play a crucial role in regulating its LH-like and FSH-like activities.

BMC BIOTECHNOLOGY (2021)

Article Chemistry, Applied

Alginate-chitosan oligosaccharide-ZnO composite hydrogel for accelerating wound healing

Miao Zhang et al.

Summary: A novel composite hydrogel was fabricated, promoting cell proliferation and migration for wound healing, while also exhibiting significant antibacterial activity. This study highlights the potential of marine carbohydrate composite hydrogels in wound care management.

CARBOHYDRATE POLYMERS (2021)

Article Reproductive Biology

Oviduct fluid during IVF moderately modulates polyspermy in in vitro- produced goat embryos during the non-breeding season

G. M. Braganca et al.

Summary: The study found the presence of reproductive-related proteins in the oviduct fluid of anestrous goats and demonstrated that supplementation with this fluid during IVF can modulate polyspermy incidence and enhance IVF efficiency.

THERIOGENOLOGY (2021)

Article Multidisciplinary Sciences

A blueprint of the topology and mechanics of the human ovary for next-generation bioengineering and diagnosis

Emna Ouni et al.

Summary: Despite the long history of human ovary dissection, the biophysical characteristics of ovarian tissue remain poorly understood. This study reveals a unique biophysical phenotype of reproductive-age tissue, providing insights for designing artificial ovaries and potential applicability to characterizing other organs in physiological or pathological states.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Capitalizing on transcriptome profiling to optimize and identify targets for promoting early murine folliculogenesis in vitro

Andrea Jones et al.

Summary: In vitro ovarian follicle culture is focused on providing fertility options for survivors of childhood cancer, particularly through successful culture of late-stage murine follicles and understanding the mechanisms of successful follicle co-culture. Gene expression analysis revealed distinct transcriptomic profiles in follicles co-cultured in larger groups, suggesting the importance of factors such as prolactin signaling and angiogenesis-related genes. Comparison to follicles grown in the native environment highlighted similarities and differences, offering insights for improving culture methods and fertility options for survivors of childhood cancer.

SCIENTIFIC REPORTS (2021)

Review Materials Science, Multidisciplinary

3D printing technology; methods, biomedical applications, future opportunities and trends

Yahya Bozkurt et al.

Summary: 3D printing technology, a miracle manufacturing method widely used in the medical field in recent years, is applied in surgery, pharmaceutical industry, disease modeling, development of customized implants and prostheses, organ printing, vet medicine, and tissue engineering applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Review Engineering, Biomedical

Advances in biomaterials and regenerative medicine for primary ovarian insufficiency therapy

Sichen Zhang et al.

Summary: POI is a type of ovarian dysfunction affecting over 1% of women, with HRT being the common treatment to alleviate symptoms but unable to restore ovarian functions. Stem cell therapy is a proposed emerging treatment for POI, which requires further research to establish effective treatment strategies.

BIOACTIVE MATERIALS (2021)

Review Biochemistry & Molecular Biology

A Review on Microfluidics: An Aid to Assisted Reproductive Technology

Anand Baby Alias et al.

Summary: Infertility refers to the inability to achieve pregnancy after 12 or more months of regular unprotected sexual intercourse. Assisted reproductive technology (ART) plays a crucial role in addressing infertility, with techniques like IVF, ICSI, and IUI being commonly used. Microfluidic technologies can enhance ART procedures by incorporating various techniques for analysis, manipulation, and monitoring of embryos and gametes.

MOLECULES (2021)

Review Materials Science, Multidisciplinary

Engineering bioactive synthetic polymers for biomedical applications: a review with emphasis on tissue engineering and controlled release

Edna Johana Bolivar-Monsalve et al.

Summary: Synthetic polymers (SyPs) have various applications in biomedical engineering, with advantages in mechanical properties, chemical structure, and consistency. Functionalization of SyPs is necessary for applications such as tissue engineering.

MATERIALS ADVANCES (2021)

Article Nanoscience & Nanotechnology

Hyaluronic Acid Hydrogel with Adjustable Stiffness for Mesenchymal Stem Cell 3D Culture via Related Molecular Mechanisms to Maintain Stemness and Induce Cartilage Differentiation

Ying Ren et al.

Summary: The mechanical strength of hydrogel scaffolds was adjusted by changing the molecular weight of hyaluronic acid (HA) in this study. It was found that low-strength hydrogels could help maintain the stemness properties of BMSCs, while high-strength hydrogels had the potential to promote the direction of cartilage differentiation of BMSCs.

ACS APPLIED BIO MATERIALS (2021)

Review Multidisciplinary Sciences

Alginate and its application to tissue engineering

Deepti Rekha Sahoo et al.

Summary: Alginate, a natural polysaccharide, is widely used in biomedical fields due to its outstanding properties such as biocompatibility and easy processability. It is utilized in applications like drug delivery, wound healing, and tissue engineering for its ability to form various 3D scaffolding materials.

SN APPLIED SCIENCES (2021)

Review Biotechnology & Applied Microbiology

Extracellular matrix-derived biomaterials in engineering cell function

Hao Xing et al.

BIOTECHNOLOGY ADVANCES (2020)

Review Chemistry, Applied

Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review

Aurora C. Hernandez-Gonzalez et al.

CARBOHYDRATE POLYMERS (2020)

Review Chemistry, Multidisciplinary

Bioprinting: From Tissue and Organ Development to in Vitro Models

Carlos Mota et al.

CHEMICAL REVIEWS (2020)

Review Engineering, Environmental

Trends in 3D Printing Processes for Biomedical Field: Opportunities and Challenges

Alina Ghilan et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Article Cell Biology

Development of a Novel Hanging Drop Platform for Engineering Controllable 3D Microenvironments

Chin-Yi Cho et al.

FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2020)

Review Biotechnology & Applied Microbiology

Potential of Chitosan and Its Derivatives for Biomedical Applications in the Central Nervous System

Doddy Denise Ojeda-Hernandez et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Article Biology

Impacts of different synthetic polymers on vitrification of ovarian tissue

Mohammad Hamed Shahsavari et al.

CRYOBIOLOGY (2020)

Review Endocrinology & Metabolism

Human Folliclein vitroCulture Including Activation, Growth, and Maturation: A Review of Research Progress

Qiyu Yang et al.

FRONTIERS IN ENDOCRINOLOGY (2020)

Article Biotechnology & Applied Microbiology

Graphene Oxide Improvesin vitroFertilization in Mice With No Impact on Embryo Development and Preserves the Membrane Microdomains Architecture

Nicola Bernabo et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Review Biotechnology & Applied Microbiology

Modulating Alginate Hydrogels for Improved Biological Performance as Cellular 3D Microenvironments

Mariana Isabel Neves et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Editorial Material Multidisciplinary Sciences

3D bioprinting of cells, tissues and organs

Madhuri Dey et al.

SCIENTIFIC REPORTS (2020)

Article Biochemistry & Molecular Biology

Alginate hydrogel containing hydrogen sulfide as the functional wound dressing material: In vitro and in vivo study

Simin Nazarnezhada et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Multidisciplinary Sciences

Comparison of Bovine Small Antral Follicle Development in Two- and Three-Dimensional Culture Systems

Yuanyuan He et al.

ANAIS DA ACADEMIA BRASILEIRA DE CIENCIAS (2020)

Article Obstetrics & Gynecology

Artificial intelligence in human in vitro fertilization and embryology

Nikica Zaninovic et al.

FERTILITY AND STERILITY (2020)

Review Engineering, Biomedical

Chitosan based bioactive materials in tissue engineering applications-A review

Md Minhajul Islam et al.

BIOACTIVE MATERIALS (2020)

Article Polymer Science

An overview of synthetic modification of nitrile group in polymers and applications

Pambingal Rajan Sruthi et al.

JOURNAL OF POLYMER SCIENCE (2020)

Review Engineering, Biomedical

Processing of collagen based biomaterials and the resulting materials properties

Michael Meyer

BIOMEDICAL ENGINEERING ONLINE (2019)

Article Medicine, Research & Experimental

Hesperidin improves the follicular development in 3D culture of isolated preantral ovarian follicles of mice

Hamed Shoorei et al.

EXPERIMENTAL BIOLOGY AND MEDICINE (2019)

Article Multidisciplinary Sciences

Electrospun patterned porous scaffolds for the support of ovarian follicles growth: a feasibility study

Liliana Liverani et al.

SCIENTIFIC REPORTS (2019)

Review Hematology

Cryopreservation of Human Ovarian Tissue: A Review

Ellen Cristina Rivas Leonel et al.

TRANSFUSION MEDICINE AND HEMOTHERAPY (2019)

Review Biochemical Research Methods

IVF-on-a-Chip: Recent Advances in Microfluidics Technology for In Vitro Fertilization

Lindong Weng

SLAS TECHNOLOGY (2019)

Review Biotechnology & Applied Microbiology

3D and 4D Printing of Polymers for Tissue Engineering Applications

Dilara Goksu Tamay et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)

Article Agriculture, Dairy & Animal Science

Is the pre-antral ovarian follicle the 'holy grail' for female fertility preservation?

A. Bus et al.

ANIMAL REPRODUCTION SCIENCE (2019)

Article Obstetrics & Gynecology

Three-dimensional levitation culture improves in-vitro growth of secondary follicles in bovine model

Deize de Cassia Antonino et al.

REPRODUCTIVE BIOMEDICINE ONLINE (2019)

Review Obstetrics & Gynecology

Techniques of Cryopreservation for Ovarian Tissue and Whole Ovary

Amir Arav et al.

CLINICAL MEDICINE INSIGHTS-REPRODUCTIVE HEALTH (2019)

Article Genetics & Heredity

A novel fibrin-based artificial ovary prototype resembling human ovarian tissue in terms of architecture and rigidity

Maria Costanza Chiti et al.

JOURNAL OF ASSISTED REPRODUCTION AND GENETICS (2018)

Article Biotechnology & Applied Microbiology

Retrievable hydrogels for ovarian follicle transplantation and oocyte collection

Peter D. Rios et al.

BIOTECHNOLOGY AND BIOENGINEERING (2018)

Review Medicine, Research & Experimental

Expected advances in human fertility treatments and their likely translational consequences

Norbert Gleicher

JOURNAL OF TRANSLATIONAL MEDICINE (2018)

Article Reproductive Biology

Isolation and culture of chicken growing follicles in 2-and 3-dimensional models

Dan Zhao et al.

THERIOGENOLOGY (2018)

Review Endocrinology & Metabolism

Cryopreservation of Ovarian Tissue: Opportunities Beyond Fertility Preservation and a Positive View Into the Future

Stine G. Kristensen et al.

FRONTIERS IN ENDOCRINOLOGY (2018)

Review Developmental Biology

In vitro follicle culture in the context of IVF

Anamaria C. Herta et al.

REPRODUCTION (2018)

Review Developmental Biology

Integration of microfluidics in animal in vitro embryo production

M. B. Wheeler et al.

MOLECULAR HUMAN REPRODUCTION (2017)

Article Reproductive Biology

Interrelationships between ovarian follicles grown in culture and possible mediators

Alexander V. Sirotkin et al.

REPRODUCTIVE BIOLOGY (2017)

Article Obstetrics & Gynecology

Platelet-rich plasma promotes the development of isolated human primordial and primary follicles to the preantral stage

Laleh Hosseini et al.

REPRODUCTIVE BIOMEDICINE ONLINE (2017)

Review Cell Biology

In vitro culture of ovarian follicles from Peromyscus

Xiaoming He et al.

SEMINARS IN CELL & DEVELOPMENTAL BIOLOGY (2017)

Review Cell & Tissue Engineering

Bioengineering Strategies to Treat Female Infertility

Che-Ying Kuo et al.

TISSUE ENGINEERING PART B-REVIEWS (2017)

Article Multidisciplinary Sciences

A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice

Monica M. Laronda et al.

NATURE COMMUNICATIONS (2017)

Article Chemistry, Analytical

A Microfluidic Device for Culturing an Encapsulated Ovarian Follicle

Aziz Ur Rehman Aziz et al.

MICROMACHINES (2017)

Article Multidisciplinary Sciences

Hanging Drop, A Best Three-Dimensional (3D) Culture Method for Primary Buffalo and Sheep Hepatocytes

Meena Shri et al.

SCIENTIFIC REPORTS (2017)

Article Engineering, Biomedical

Microfluidic Encapsulation of Ovarian Follicles for 3D Culture

Xiaoming He

ANNALS OF BIOMEDICAL ENGINEERING (2017)

Review Biochemistry & Molecular Biology

A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue

Satyajit Patra et al.

CELL BIOCHEMISTRY AND BIOPHYSICS (2016)

Article Materials Science, Multidisciplinary

Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication

Lawrence E. Murr

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)

Review Biochemical Research Methods

A practical guide to hydrogels for cell culture

Steven R. Caliari et al.

NATURE METHODS (2016)

Review Radiology, Nuclear Medicine & Medical Imaging

Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications

Alessandro Marro et al.

CURRENT PROBLEMS IN DIAGNOSTIC RADIOLOGY (2016)

Article Cell & Tissue Engineering

Synthetic hydrogel supports the function and regeneration of artificial ovarian tissue in mice

Jiwon Kim et al.

NPJ REGENERATIVE MEDICINE (2016)

Article Obstetrics & Gynecology

Mouse preantral follicle development in two-dimensional and three-dimensional culture systems after ovarian tissue vitrification

Seyedeh Zeynab Sadr et al.

EUROPEAN JOURNAL OF OBSTETRICS & GYNECOLOGY AND REPRODUCTIVE BIOLOGY (2015)

Article Developmental Biology

3D culture of ovarian follicles: a system towards their engineering?

Maurizio Zuccotti et al.

INTERNATIONAL JOURNAL OF DEVELOPMENTAL BIOLOGY (2015)

Article Cell & Tissue Engineering

Culture of preantral follicles in poly(ethylene) glycol-based, three-dimensional hydrogel: a relationship between swelling ratio and follicular developments

Jong Il Ahn et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)

Article Multidisciplinary Sciences

In vitro follicle growth supports human oocyte meiotic maturation

Shuo Xiao et al.

SCIENTIFIC REPORTS (2015)

Article Endocrinology & Metabolism

Hypoxia-mediated carbohydrate metabolism and transport promote early-stage murine follicle growth and survival

Yogeshwar Makanji et al.

AMERICAN JOURNAL OF PHYSIOLOGY-ENDOCRINOLOGY AND METABOLISM (2014)

Article Ophthalmology

Biology of the Extracellular Matrix

Beatrice Yue

JOURNAL OF GLAUCOMA (2014)

Article Multidisciplinary Sciences

Reconfigurable microfluidic hanging drop network for multi-tissue interaction and analysis

Olivier Frey et al.

NATURE COMMUNICATIONS (2014)

Article Polymer Science

Chitosan-based biomaterials for tissue engineering

Florence Croisier et al.

EUROPEAN POLYMER JOURNAL (2013)

Article Developmental Biology

Towards a 3D culture of mouse ovarian follicles

Martina Belli et al.

INTERNATIONAL JOURNAL OF DEVELOPMENTAL BIOLOGY (2012)

Editorial Material Obstetrics & Gynecology

Derivation of developmentally competent oocytes by in vitro culture of preantral follicles retrieved from aged mice

Jung Kyu Choi et al.

FERTILITY AND STERILITY (2011)

Article Multidisciplinary Sciences

A Simple Hanging Drop Cell Culture Protocol for Generation of 3D Spheroids

Ramsey Foty

JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2011)

Article Obstetrics & Gynecology

Super cool X-1000 and Super cool Z-1000, two ice blockers, and their effect on vitrification/warming of mouse embryos

H. Badrzadeh et al.

EUROPEAN JOURNAL OF OBSTETRICS & GYNECOLOGY AND REPRODUCTIVE BIOLOGY (2010)

Article Obstetrics & Gynecology

A novel two-step strategy for in vitro culture of early-stage ovarian follicles in the mouse

Shi Ying Jin et al.

FERTILITY AND STERILITY (2010)

Article Cell Biology

The extracellular matrix at a glance

Christian Frantz et al.

JOURNAL OF CELL SCIENCE (2010)

Review Agriculture, Dairy & Animal Science

Ovarian Follicular Dynamics: A Review with Emphasis on the Bovine Species. Part I: Folliculogenesis and Pre-antral Follicle Development

J. M. J. Aerts et al.

REPRODUCTION IN DOMESTIC ANIMALS (2010)

Review Endocrinology & Metabolism

Three-dimensional in vitro follicle growth: overview of culture models, biomaterials, design parameters and future directions

Nina Desai et al.

REPRODUCTIVE BIOLOGY AND ENDOCRINOLOGY (2010)

Article Agriculture, Dairy & Animal Science

Survival and developmental competence of buffalo preantral follicles using three-dimensional collagen gel culture system

G. Taru Sharma et al.

ANIMAL REPRODUCTION SCIENCE (2009)

Article Engineering, Biomedical

Interpenetrating fibrin-alginate matrices for in vitro ovarian follicle development

Ariella Shikanov et al.

BIOMATERIALS (2009)

Article Obstetrics & Gynecology

In vitro grown human ovarian follicles from cancer patients support oocyte growth

Min Xu et al.

HUMAN REPRODUCTION (2009)

Article Cell & Tissue Engineering

Dynamic Oxygen Enhances Oocyte Maturation in Long-Term Follicle Culture

Matthew K. Heise et al.

TISSUE ENGINEERING PART C-METHODS (2009)

Article Cell & Tissue Engineering

Maintenance of morphology and growth of ovarian follicles in suspension culture

NM Rowghani et al.

TISSUE ENGINEERING (2004)

Article Engineering, Biomedical

Handling individual mammalian embryos using microfluidics

IK Glasgow et al.

IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2001)